Typo in spc4r36j, section 6.33: REPORT LUNS

Ralph Weber Ralph.Weber at wdc.com
Mon Oct 14 06:50:54 PDT 2013


* From the T10 Reflector (t10 at t10.org), posted by:
* Ralph Weber <Ralph.Weber at wdc.com>
*
The two cited sentences are not talking about the same set of peripheral
qualifier values.
The first sentence says '... peripheral qualifier values other than 000b and
011b ...' (i.e., pqual != 000b and pqual != 011b).
The second sentence is explicitly about pqual == 011b.
All the best,
.Ralph
________________________________________
From: owner-t10 at t10.org [owner-t10 at t10.org] on behalf of Hannes Reinecke
[hare at suse.de]
Sent: Monday, October 14, 2013 8:12 AM
To: t10 at t10.org
Subject: Typo in spc4r36j, section 6.33: REPORT LUNS
* From the T10 Reflector (t10 at t10.org), posted by:
* Hannes Reinecke <hare at suse.de>
*
Dear Sirs,
could you please clarify this paragraph from section 6.33: REPORTS
LUNS in spc4r36j:
> Logical unit numbers for logical units with PERIPHERAL QUALIFIER
> values other than 000b and 011b may be included in the logical
> unit inventory. Logical unit numbers for logical units with a
> PERIPHERAL QUALIFIER value of 011b shall not be included in the
> logical unit inventory.
Either LUNs with pqual 0x11 _may_ be include or _shall not_ be
included, but not both.
I suspect the intention is to include LUNs with pqual 0x10 in the
LUN inventory, but it should state so in the text.
Cheers,
Hannes
--
Dr. Hannes Reinecke		      zSeries & Storage
hare at suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org



More information about the T10 mailing list