SAS3 JTF Clarification

Angus McLaren AMcLaren at semtech.com
Thu Feb 14 21:14:19 PST 2013


* From the T10 Reflector (t10 at t10.org), posted by:
* Angus McLaren <AMcLaren at semtech.com>
*
 Hi All,
Referring to sas3r05a.pdf, it appears there is a discrepancy in Table 33 (JTF
parameters).
"Note a" clearly states that the JTF 3dB point should be at fbaud/1667 across
all data rates.
However, under the "trained without SSC support 12Gbps" column of Table 33,
the JTF 3dB point is listed as 3.6MHz. This is in conflict with note a, which
would indicate a 3dB frequency of 7.2MHz.
Is this a copy/paste error, or is the JTF 3dB frequency really the same
between 6Gbps and 12Gbps rates?
Thanks,
Angus
==================================================================
Angus McLaren, Analog Design Manager
Semtech - Snowbush IP
(416)-925-5643 x5226
==================================================================
This communication contains confidential information intended only for the
addressee(s). If you have received this communication in error, please notify
us immediately and delete this communication from your mail box.
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org



More information about the T10 mailing list