T10 Document Number Assigned (T10/11-036r4)

Mon May 23 11:32:55 PDT 2011

* From the T10 Reflector (t10 at t10.org), posted by:
* "Penokie, George" <George.Penokie at lsi.com>
*
A new revision of the transmitter training proposal (11-026r4) has been
posted. This is the version that will be discussed on the 5/25 conference
call. If you would like the call-in/web information on the call send me an
e-mail.
The changes from revision 3 are:
a) reordered the valid coefficient update requests table to match the order
the fields appear in the status
field;
b) replaced the Attached Phy's Transmitter Reset Required message with a
default and reference
argument in the Current Coefficient x messages;
c) based the All Coefficients Not Ready message being sent on receiving a
status, other than ready, on
all the coefficients after an Attached Phy's Transmitter Training (Stop)
message is received by the SP
receiver. The All Coefficients Not Ready message is then continuously sent
until an Attached Phy's
Transmitter Training (Start) message is received;
d) removed the requirement to send the reference and default coefficient
settings at least six times;
e) completed the section that contains all the flow diagrams. There are now
examples of the:
A) initialization sequence;
B) handshake of a coefficient increment and decrement requests;
C) handshake of a request for setting the coefficients to their reference
values;
D) completion sequence; and
E) error sequence;
f) changed transmitter training information unit to TTIU;
g) made editorial changes requested at the March phy working group;
h) changed the coefficient settings values to reference_1, reference_2, and
no_equalization;
i) added in a coefficient Request byte the includes the COEFFICIENT 1 REQUEST
field, COEFFICIENT 2
REQUEST field, and COEFFICIENT 3 REQUEST fields;
j) adjusted the valid coefficients update requests table to make it clear
what Coefficient Requests are
valid;
k) add keys and notes to the figures in the correct format;
l) added the restriction that a receiver is not allowed to start training
until it has received an update
complete for all coefficients it requested be changed; and
m) added the restriction that a receiver is not allowed to request a
coefficient change unless all coefficient
statuses are ready.
Bye for now, 
George Penokie
LSI Corporation 
3033 41st St. NW 
Suite 100 
Rochester, MN 55901
507-328-9017 
george.penokie at lsi.com
-----Original Message-----
From: localadmin at scsibbs.lsi.com [mailto:localadmin at scsibbs.lsi.com] On
Behalf Of T10 Document Administrator
Sent: Monday, May 23, 2011 1:20 PM
To: Penokie, George
Subject: Re: RE: T10 Document Number Assigned (T10/11-036r4)
2011/05/23 12:20:26 
Your request to upload a file or files to the T10 site has been accepted.
Your PDF file will be posted at:
   http://www.t10.org/cgi-bin/ac.pl?t=d&f=11-036r4.pdf
Normally, the posting/archiving process takes about 30 minutes.
Please contact John Lohmeyer <lohmeyer at t10.org>
should you need further assistance.
"Penokie, George" <George.Penokie at lsi.com> wrote:
> From: "Penokie, George" <George.Penokie at lsi.com>
> To: T10 Document Administrator <docs at t10.org>
> Date: Mon, 23 May 2011 12:10:36 -0600
> Subject: RE: T10 Document Number Assigned (T10/11-036r4)
> Extracted-To: AutoPost
> 
> 
> 
> Bye for now, 
> George Penokie
>  
> LSI Corporation 
> 3033 41st St. NW 
> Suite 100 
> Rochester, MN 55901
>  
> 507-328-9017 
> george.penokie at lsi.com
> 
> 
> -----Original Message-----
> From: localadmin at scsibbs.lsi.com [mailto:localadmin at scsibbs.lsi.com] On
Behalf Of T10 Document Administrator
> Sent: Monday, May 23, 2011 1:06 PM
> To: Penokie, George
> Subject: T10 Document Number Assigned (T10/11-036r4)
> 
> 2011/05/23 12:06:26 (AD v1.36)
> 
> ## Your T10 document number request has been approved and
> ## the following document number was assigned:
> 
>   Document Number: T10/11-036r4
>	Upload Code: AC_00627f8zMskpE7f (Do not delete or change this line.)
>     Document_Date: 2011/05/23
>   Document_Author: George Penokie
>    Document_Title: SPL-2: Transmitter Training
>    Meeting_Agenda: SAS_Prot - Serial Attached SCSI Protocol
>   Meeting_Agenda2: none
> Document_Comments: <none>
>      Other_Number: <none>
> 
> ## POSTING YOUR DOCUMENT USING A WEB BROWSER
> ## -----------------------------------------
> ##
> ## You may upload the file(s) for your document using
> ## the form at:
> ##
> ##   http://www.t10.org/fupload.htm
> ##
> ##
> ## POSTING YOUR DOCUMENT BY REPLYING TO THIS EMAIL
> ## -----------------------------------------------
> ##
> ## Please reply to this email and attach your document 
> ## to the reply email.  Please attach both the source 
> ## file and a PDF file made from your source file.  
> ## The source file may be ZIP'd, but the PDF file must
> ## not be ZIP'd.
> ##
> ## Please generate your PDF files for posting to be 
> ## compatible with Acrobat 5.x (PDF 1.4). (This
> ## parameter is set in Distiller, Settings, Job 
> ## Options, Compatibility.)
> ##
> ## If you do not attach a PDF file, your upload will be
> ## forwarded to an administrator.  This will delay your
> ## posting until the administrator can make the PDF file
> ## for you.
> ##
> ## While you are not required to provide the source file, 
> ## it is strongly recommended that you do so. The source
> ## file will be archived in case the PDF file must be 
> ## re-created.
> ##
> ## It is critical that your reply email include the above
> ## Upload Code.  Without it, your posting cannot be
> ## processed. The filenames you use for your attachment(s)
> ## are not important as long as the extensions are correct.
> ##
> ##
> ## POSTING NON-PDF DOCUMENTS
> ## -------------------------
> ##
> ## A PDF file is necessary for the T10 mailings. You may
> ## also post one or more non-PDF files on the T10 web site
> ## as long as the extensions are all unique. These files 
> ## are not included in the T10 mailings, but are made
> ## available for downloading.
> ##
> ## To post additional files on the T10 web site, edit the
> ## Post File line to add the file extension(s) that you 
> ## want posted. Then attach file(s) with matching 
> ## extensions to your email.
> ##
> ## Example: To post an Excel spreadsheet in addition to 
> ## a PDF file, edit the line to read: Post_File: PDF XLS
> ##
> Post_File: PDF
> ##
> ## Any files you attach that do not match an extension 
> ## listed on the Post File line will be assumed to be a 
> ## source file and will be archived but not posted.
> ##
> ##
> ##  CHANGING YOUR MIND
> ##  ------------------
> ##
> ## If you wish to cancel this document number, reply to 
> ## this email without any attachments and edit the 
> ## following line to change the word no to yes:
> ##
>    Cancel_Document_Number: no
> ##
> ## Once you post a document, you cannot cancel it.
> ##
> ##
> ##  EDITING DOCUMENT INFORMATION
> ##  ----------------------------
> ##
> ## If one of the above fields Document Date, Document
> ## Title, Document Author, Document Title, Meeting 
> ## Agenda, Comments, and Other Number is no longer 
> ## accurate, you may edit it as necessary.
> ##
> ## Be careful if you edit the Meeting Agenda field;
> ## only the first word is used.  It must be one of 
> ## the words available on the Add_to_agenda pull-down
> ## from the web site.  These words may change 
> ## periodically and as of June 2002 they were: ADI, 
> ## CAP, MMC, PIP, SAS_Prot, SAS_PHY, SBP, SPI, SRP, 
> ## SSC, SSM, and T10.
> ##
> ##
> ## COPYRIGHT POLICY
> ## ----------------
> ##
> ## Do not submit documents containing a copyright 
> ## statement unless you add the following statement:
> ##
> ##	Permission is granted to members of INCITS, its 
> ##	technical committees and their associated task 
> ##	groups to reproduce this document for the purposes
> ##	of INCITS standardization activities, provided
> ##	this notice is included.
> ##
> ## If you upload a copyrighted document, with or without
> ## this statement, it will be assumed implicitly that you
> ## and your organization have given the above permission.
> ##
> ##
> ## APPROPRIATE CONTENT
> ## -------------------
> ##
> ## Do not upload inappropriate material.  If you do, your
> ## files will be removed and your posting privileges will
> ## be revoked.
> 
> Attachment Converted: "C:\ATTACH\11-036r4.pdf"
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org