Clarification on SES-3 OTHER ELEMENT INDEX
Elliott, Robert (Server Storage)
Elliott at hp.com
Fri Aug 12 09:33:58 PDT 2011
Formatted message: <a href="http://www.t10.org/cgi-bin/ac.pl?t=r&f=r1108121_f.htm">HTML-formatted message</a>
All the element index fields are absolute... it's not the index relative to
only certain types.
From: owner-t10 at t10.org [mailto:owner-t10 at t10.org] On Behalf Of Alan Westbury
Sent: Friday, 12 August, 2011 9:30 AM
To: t10 at t10.org
Subject: Clarification on SES-3 OTHER ELEMENT INDEX
We are looking at the definition of the OTHER ELEMENT INDEX field as used in
the Additional Element Status diagnostic page.
This field is used in the Expander Phy Descriptor (and Phy Descriptor for the
SCSI Intiator/Target Ports) and is described as follows:
"The OTHER ELEMENT INDEX field indicates the index of a Device Slot element
(see 7.3.2), Array Device Slot element (see 7.3.3), SAS Expander element (see
7.3.25), SCSI Initiator Port element (see 7.3.23), SCSI Target Port element
(see 7.3.22), or Enclosure Services Controller Electronics element (see
7.3.9) to which the expander phy is attached. If the expander phy is not
attached to one of those elements, then the OTHER ELEMENT INDEX field shall
be set to FFh."
My question is how is the application client supposed to determine the type
of the Other Element? In other words if the OTHER ELEMENT INDEX has a value
of N - is that the (N+1)th Array Device Slot element, SAS expander element
Wouldn't it be better if the definition was along the lines of the ELEMENT
INDEX used elsewhere in this page?
"The ELEMENT INDEX field indicates the index of the status element that this
descriptor is describing. The index is based on the position of the status
element in the Enclosure Status diagnostic pages (see 6.1.4) relative to all
other individual status elements. It does not include the overall status
Thanks and Regards,
Langstone Road, Havant, PO9 1SA
Email: alan_westbury at xyratex.com<mailto:alan_westbury at xyratex.com>
This email may contain privileged or confidential information, which should
only be used for the purpose for which it was sent by Xyratex. No further
rights or licenses are granted to use such information. If you are not the
intended recipient of this message, please notify the sender by return and
delete it. You may not use, copy, disclose or rely on the information
contained in it.
Internet email is susceptible to data corruption, interception and
unauthorised amendment for which Xyratex does not accept liability. While we
have taken reasonable precautions to ensure that this email is free of
viruses, Xyratex does not accept liability for the presence of any computer
viruses in this email, nor for any losses caused as a result of viruses.
Xyratex Technology Limited (03134912), Registered in England & Wales,
Registered Office, Langstone Road, Havant, Hampshire, PO9 1SA.
The Xyratex group of companies also includes, Xyratex Ltd, registered in
Bermuda, Xyratex International Inc, registered in California, Xyratex
(Malaysia) Sdn Bhd registered in Malaysia, Xyratex Technology (Wuxi) Co Ltd
registered in The People's Republic of China and Xyratex Japan Limited
registered in Japan.
More information about the T10