FW: RE: T10 Working Draft Assignment: spl-r06d

[Penokie, George]

* From the T10 Reflector (t10 at t10.org), posted by:
* "Penokie, George" <George.Penokie at lsi.com>
*
I have posted a new version of SPL. This version has all changes made as a
result of letter ballot marked with strikeouts and underlines. The changes
|from revision 6c to 6d are indicated by change bars.
For those of you who are interested in the phy power management should look
at:
- The PS_ACK section (6.2.6.11 PS_ACK)
- The PS_NAK section (6.2.6.12 PS_NAK)
- Section 6.11 Entering low phy power condition (Note that there is now a
PS_ACK pattern)
- In the CC and XL state machines the term PS_ACK/Idle Dwords has been
replaced with PS_ACK pattern.
Bye for now, 
George Penokie
LSI Corporation 
3033 41st St. NW 
Suite 100 
Rochester, MN 55901
507-328-9017 
george.penokie at lsi.com
-----Original Message-----
From: localadmin at scsibbs.lsi.com [mailto:localadmin at scsibbs.lsi.com] On
Behalf Of T10 Working Draft Administrator
Sent: Tuesday, June 01, 2010 12:00 PM
To: Penokie, George
Cc: John Lohmeyer
Subject: Re: RE: T10 Working Draft Assignment: spl-r06d
2010/06/01 11:00:26 
Your request to upload a file or files to the T10 site has been accepted.
Your file will be posted at:
   http://www.t10.org/cgi-bin/ac.pl?t=f&f=spl-r06d.pdf
Source File(s) that will be archived are:
   SPL-r06d.zip will be archived as spl-r06d.zip
Normally, the posting/archiving process takes about 30 minutes.
Please contact John Lohmeyer <lohmeyer at t10.org>
should you need further assistance.
"Penokie, George" <George.Penokie at lsi.com> wrote:
> From: "Penokie, George" <George.Penokie at lsi.com>
> To: T10 Working Draft Administrator <docs at t10.org>
> Date: Tue, 1 Jun 2010 10:49:58 -0600
> Subject: RE: T10 Working Draft Assignment: spl-r06d
> Extracted-To: AutoPWD
> 
> 
> 
> Bye for now, 
> George Penokie
>  
> LSI Corporation 
> 3033 41st St. NW 
> Suite 100 
> Rochester, MN 55901
>  
> 507-328-9017 
> george.penokie at lsi.com
> 
> -----Original Message-----
> From: localadmin at scsibbs.lsi.com [mailto:localadmin at scsibbs.lsi.com] On
Behalf Of T10 Working Draft Administrator
> Sent: Tuesday, June 01, 2010 11:04 AM
> To: Penokie, George
> Subject: T10 Working Draft Assignment: spl-r06d
> 
> 2010/06/01 10:04:27 
> 
> Your T10 working draft request has been approved and
> the following working draft revision was assigned:
> 
>	Project: SPL
> Working Draft: spl-r06d
>   Upload Code: AC_05814sS7fFbnioj
>    Draft_Date: 2010/06/01
>  Draft_Author: George Penokie
>   Draft_Title: SAS Protocol Layer (SPL)
> 
> ## Please reply to this email and attach your working draft to
> ## the reply email.  Please attach both the source file and a
> ## PDF file made from your source file.  The source file may be
> ## ZIP'd, but the PDF file must not be ZIP'd.
> ##
> ## Please generate your PDF files for posting to be compatible 
> ## with Acrobat 4.0 (PDF 1.3). (This parameter is set in 
> ## Distiller, Settings, Job Options, Compatibility.)
> ##
> ## If you cannot create PDF files, your upload will be
> ## forwarded to an administrator.  This will delay your
> ## posting until the administrator can make the PDF file.
> ##
> ## It is strongly recommended that you provide the source file(s).
> ## The source file(s) will be archived in case the PDF file must
> ## be re-created.
> ##
> ## It is critical that your reply email include the above
> ## Upload Code.  Without it, your posting cannot be processed.
> ## The filenames you use are not important as long as the
> ## extensions are correct.
> ##
> ##
> ##  CHANGING YOUR MIND
> ##  ------------------
> ##
> ## If you wish to cancel this working draft, reply to this eamil
> ## without any attachments and edit the following line to change
> ## the word no to yes:
> ##
>    Cancel_Working_Draft: no
> ##
> ##
> ##  EDITING WORKING DRAFT INFORMATION
> ##  ---------------------------------
> ##
> ## If one of the above fields Draft Date, Draft Author, or
> ## Draft Title is no longer accurate, you may edit it as
> ## necessary.
> ##
> ## If you do not want this working draft to be made the current
> ## working draft for your project on the T10 web site, edit the
> ## following line to change the word yes to no:
> ##
>    Set_as_Current_Revision_on_web_site: yes
> ##
> ## Please note that changing the above parameter only affects the
> ## links on the "Draft Standards and Technical Reports" and the
> ## "SCSI-3 Standards Architecture" web pages. This working draft
> ## will still appear in the next mailing.
> ##
> ##  COPYRIGHT POLICY
> ##  ----------------
> ##
> ## Do not post working drafts containing a copyright statement
> ## other than the INCITS copyright statement.
> 
> Attachment Converted: "C:\ATTACH\SPL-r06d.zip"
> 
> Attachment Converted: "C:\ATTACH\SPL-r06d.pdf"
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org