Device Tray Open!

[David Burg]

* From the T10 Reflector (t10 at t10.org), posted by:
* "David Burg" <dburg at nero.com>
*
Dear Bill, Dear MMC members,

Do we have a good reason to preserve the duplication of MECHANISM STATUS
command response "Door Open" bit and "Get Event/Status Notification" CDB
with a Notification Class Request of "Media" Door or Tray Open bit (bit 0 of
byte 5) in MMC5?

If we don't, maybe we can make one of the two obsolete and simplify both
host and logical unit implementation. Having 3 different reports of the door
status (sense code, mechanism status, GESN) isn't good.

Best regards,

David Burg

----------------------------------------------------------------
David Burg
Senior Engineer
Standardization and Research

Nero AG               phone: +49 (0)7248 928 327
Im Stoeckmaedle 18    fax:   +49 (0)7248 928 299
76307 Karlsbad        email: dburg at nero.com
Germany               http://www.nero.com
----------------------------------------------------------------



-----Original Message-----
From: owner-t10 at t10.org [mailto:owner-t10 at t10.org] On Behalf Of Bill
McFerrin
Sent: Thursday, October 20, 2005 2:13 PM
To: t10 at t10.org
Subject: RE: Device Tray Open!

* From the T10 Reflector (t10 at t10.org), posted by:
* "Bill McFerrin" <billmc at tstar.net>
*
Wasim,
Try the MECHANISM STATUS command.  Its response has a "Door Open" bit that
should report the status you want.

Bill McFerrin

-----Original Message-----
From: owner-t10 at t10.org [mailto:owner-t10 at t10.org] On Behalf Of Wasim Sabir
Sent: Wednesday, 19 October, 2005 3:17 PM
To: t10 at t10.org
Subject: Device Tray Open!

* From the T10 Reflector (t10 at t10.org), posted by:
* Wasim Sabir <wasim.sabir at gmail.com>
*
Dear All,

Is there any way I could check whether a device tray is open? I have
tried ReadDiscInformation over an open try device and hoped that it
would return me error "MEDIUM NOT PRESENT - TRAY OPEN" but it always
return "MEDIUM NOT PRESENT".

--
With kind regards,

Wasim Sabir
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org

*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org


*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org