SAS-1.1 CJTPAT
Kido Shogo
kido-sxa at necst.nec.co.jp
Mon Mar 15 05:02:30 PST 2004
* From the T10 Reflector (t10 at t10.org), posted by:
* "Kido Shogo" <kido-sxa at necst.nec.co.jp>
*
Elliot san;
Thank you for your reply.
I have a question.
If phy detects error(ex. disparity error, CRC error) at receiving CJTPAT,
how should phy do?
Thanks,
Shogo Kido
NEC System Technologies, Ltd.
External:(+81)89-947-7901
> -----Original Message-----
> From: owner-t10 at t10.org [mailto:owner-t10 at t10.org] On Behalf
> Of Elliott, Robert (Server Storage)
> Sent: Sunday, March 14, 2004 8:59 AM
> To: t10 at t10.org
> Subject: RE: SAS-1.1 CJTPAT
>
>
> * From the T10 Reflector (t10 at t10.org), posted by:
> * "Elliott, Robert (Server Storage)" <elliott at hp.com>
> *
> Every SAS phy should have a way to repeatedly generate
> CJTPAT; otherwise it cannot be tested against the jitter
> requirements. There is currently no standard way to invoke
> this; a mode page (in targets) or SMP page (in
> expanders) to put it into such a mode would suffice.
>
> You should avoid sending ALIGNs during the pattern.
>
> Since it's just a transmit pattern, I don't understand your
> question about error primitives. The pattern does not
> normally flow through an expander. Although the example in
> table A.4 shows how to put the pattern into the format of an
> SSP data frame, it's not really intended to be used as normal
> SSP traffic flowing through an expander.
>
> --
> Rob Elliott, elliott at hp.com
> Hewlett-Packard Industry Standard Server Storage Advanced
> Technology https://ecardfile.com/id/RobElliott
>
>
>
>
> > -----Original Message-----
> > From: owner-t10 at t10.org [mailto:owner-t10 at t10.org] On Behalf
> > Of Kido Shogo
> > Sent: Monday, March 01, 2004 6:05 PM
> > To: t10 at t10.org
> > Subject: SAS-1.1 CJTPAT
> >
> >
> > * From the T10 Reflector (t10 at t10.org), posted by:
> > * "Kido Shogo" <kido-sxa at necst.nec.co.jp>
> > *
> > Hi all,
> >
> > I have some questions about AnnexA compliant jitter test pattern
> > (CJTPAT) in SAS-1.1 rev3.
> >
> > Should the expander generates the CJTPAT?
> >
> > When the expander relays the CJTPAT,
> > should the expander does any special processing as follows for the
> > CJTPAT? Ex.
> > does not insert ALIGN in the frame
> > does not insert error primitive at error detection
> >
> > Thanks,
> > Shogo Kido
> > NEC System Technologies, Ltd.
> > External:(+81)89-947-7901
> >
> > *
> > * For T10 Reflector information, send a message with
> > * 'info t10' (no quotes) in the message body to majordomo at t10.org
> >
> *
> * For T10 Reflector information, send a message with
> * 'info t10' (no quotes) in the message body to majordomo at t10.org
>
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org
More information about the T10
mailing list