[t13] 04-136r0.pdf SCSI to ATA Command Translations
Pat LaVarre
p.lavarre at ieee.org
Fri Jun 4 14:36:07 PDT 2004
This message is from the T13 list server.
Bruce A:
> ... one example. The transcript below shows information gleaned
> from the output of (ATA) IDENTIFY DEVICE on a sandisk 128 MB compact flash
> card. The unit reports a model, serial number and firmare version ...
Very helpful, thank you.
> smartctl -a /dev/hdc | more
> smartctl version 5.31 Copyright (C) 2002-4 Bruce Allen
Please could you also easily share the results of:
alias xstrings="tr -d ' \r\n' | perl -wpe 's/(..)/chr hex \$1/eg' | strings"
sudo cat /proc/ide/hdc/identify | xstrings
sudo cat /proc/ide/hdc/identify
I can run the Perl part for you, if need be, all I need from you is:
sudo cat /proc/ide/hdc/identify
Pat LaVarre
P.S.
> http://smartmontools.sourceforge.net/
Link! Thank you, blogged to:
Subject: ata smart, ata dco, elaborated maybe in pass thru
http://ide-byte-counting.blog-city.com/read/638661.htm
Subject: scsi pass thru
http://plavarre.blog-city.com/read/614076.htm
More information about the T10
mailing list