FW: Device Identification VPD page typo in SPC3

Ralph Weber roweber at IEEE.org
Mon Oct 13 05:13:07 PDT 2003


* From the T10 Reflector (t10 at t10.org), posted by:
* Ralph Weber <roweber at ieee.org>
*
This will be corrected in SPC-3 r16.

.Ralph

Mor Griv wrote:

> 
>* From the T10 Reflector (t10 at t10.org), posted by:
>* "Mor Griv" <mor at SANRAD.COM>
>*
>Hi Ralph,
>
>I'm resending this message after 4 months of no response. This time I've added you, the SPC3 editor, as the recipient.
>I would like to get a response whether I'm right and this is a technical typo or I misunderstood something.
>This sections haven't changed up to SCP3r15.
>
>Regards,
>Mor
>
>
>-----Original Message-----
>From: Mor Griv 
>Sent: Tuesday, June 03, 2003 6:48 PM
>To: t10 at t10.org
>Subject: Device Identification VPD page typo in SPC3
>
>
>* From the T10 Reflector (t10 at t10.org), posted by:
>* "Mor Griv" <mor at SANRAD.COM>
>*
>The proposal 02-454r0 ("SPC-3 Add NAA=2 format to VPD 83") was incorporated in SPC3r10 with a typo and hasn't been corrected since.
>I'll refer to SPC3r13 so that the section numbers will be clear.
>
>In section "7.6.4.5.2 NAA IEEE Extended identifier format" there is an error in "Table 279 - NAA IEEE Extended IDENTIFIER field format".
>
>The IEEE COMPANY_ID field should contains a 24 bit canonical form OUI but the table allocates only 16 bits.
>The VENDOR SPECIFIC IDENTIFIER B should contains a 24 bit numeric value but the table allocates 32 bits.
>
>The boundary of the IEEE COMPANY_ID and VENDOR SPECIFIC IDENTIFIER B should be between bytes 4 and 5 and not 3 and 4 as it is illustrated in the original proposal.
>
>Regards,
>Mor
>*
>* For T10 Reflector information, send a message with
>* 'info t10' (no quotes) in the message body to majordomo at t10.org
>*
>* For T10 Reflector information, send a message with
>* 'info t10' (no quotes) in the message body to majordomo at t10.org
>
>  
> 

*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org




More information about the T10 mailing list