sas-r03g issues

[Elliott, Robert (Server Storage)]

* From the T10 Reflector (t10 at t10.org), posted by:
* "Elliott, Robert (Server Storage)" <Elliott at hp.com>
*
> 7.2.5.8 HARD_RESET, page155, second sentence
> "This primitive is only valid after the phy reset sequence 
> and before the identification sequence (see 4.4) and shall be 
> ignored at other times."
> 
> There is no identification sequence after the phy reset 
> sequence preceeding HARD_RESET.
> 
> Suggest changing to:
> "This primitive is only valid after the phy reset sequence 
> without an intervening identification sequence (see 4.4) and 
> shall be ignored at other times."
> 
> 4.4.2 Hard reset, page 53, first sentence
> "Between the link reset sequence and the IDENTIFY address 
> frame, if a SAS phy receives a HARD_RESET, it shall be 
> considered a reset event and initiate a hard reset of the 
> port containing that phy."
> 
> The preceeding sequence should be a phy reset and not a link 
> reset. 7.2.5.8 defines a valid HARD_RESET so the Identify 
> address frame does not need to be addressed here.
> 
> Suggest changing the sentence to:
> "After a phy reset sequence, if a SAS phy receives a 
> HARD_RESET, it shall be considered a reset event and initiate 
> a hard reset of the port containing that phy."

 
Thanks.  Both changes made as suggested.

--
Rob Elliott, elliott at hp.com
Hewlett-Packard Industry Standard Server Storage Advanced Technology
https://ecardfile.com/id/RobElliott

*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org