Draft Minutes of T10 meeting #49 - May 2, 2002
John Lohmeyer
lohmeyer at t10.org
Fri May 3 12:49:29 PDT 2002
* From the T10 Reflector (t10 at t10.org), posted by:
* John Lohmeyer <lohmeyer at t10.org>
*
A PDF version of these minutes is available at:
ftp://ftp.t10.org/t10/document.02/02-162r0.pdf
Accredited Standards Committee*
InterNational Committee for Information Technology Standards (INCITS)
Doc. No.: T10/02-162r0
Date: May 3, 2002
Reply to: John Lohmeyer
To: T10 Membership
From: Ralph Weber / John Lohmeyer
Subject: Minutes of T10 Plenary Meeting #49 -- May 2, 2002
Nashua, NH
Agenda
1. Opening Remarks
2. Approval of Agenda
3. Attendance and Membership
4. Approval of Minutes - March 2002 Meeting - Dallas, TX (T10/02-102r1)
5. Document Distribution
6. Call for Patents
7. Review of Old Action Items
8. Project Status Reports
8.1 Project Status Summary and INCITS Liaison [Lohmeyer]
8.1.1 INCITS Antitrust Guidelines
8.2 SCSI Fibre Channel Protocol - 2 (FCP-2) {Project 1144-D} [Snively]
8.3 SCSI Architecture Model - 2 (SAM-2) {Project 1157-D} [Weber]
8.4 MultiMedia Command Set - 3 (MMC-3) {Project 1363-D} [McFerrin]
8.5 SCSI Parallel Interface - 4 (SPI-4) {Project 1365-D} [Penokie]
8.6 SCSI Domain Validation Technical Report (SDV) {Project 1378-DT}
[Gibbons]
8.7 SCSI Medium Changer Commands - 2 (SMC-2) {Project 1383-D} [Oetting]
8.8 SCSI Signal Modeling (SSM) {Project 1414-DT} [Aloisi/Barnes]
8.9 SCSI RDMA Protocol (SRP) {Project 1415-D} [Simpson]
8.10 SCSI Primary Commands - 3 (SPC-3) {Project 1416-D} [Weber]
8.11 SCSI Block Commands - 2 (SBC-2) {Project 1417-D} [Elliott]
8.12 Object-based Storage Devices Commands (OSD) {Project 1355-D} [Weber]
8.13 SCSI Stream Commands - 2 (SSC-2) {Project 1434-D} [Peterson]
8.14 SCSI Passive Interconnect Performance (PIP) {Project 1439-D}
[Daggett]
8.15 SCSI Serial Bus Protocol -3 (SBP-3) {Project 1467-D} [Johansson]
8.16 SCSI Signal Modeling - 2 (SSM-2) {Project 1514-D} [Aloisi/Manildi]
8.17 SCSI RDMA Protocol - 2 (SRP-2) {Project 1524-D} [Simpson]
8.18 SCSI Parallel Interface - 5 (SPI-5) {Project 1525-D} [Penokie]
8.19 SCSI Management Server Commands (MSC) {Project 1528-D}
[Penokie/Elliott]
8.20 MultiMedia Command Set - 4 (MMC-4) {Project 1545-D} [McFerrin]
8.21 Automation/Drive Interface - Physical Layer (ADP) {Project 1556-D}
[Suhler/Griswold]
8.22 Automation/Drive Interface - Transport Protocol (ADT) {Project
1557-D} [Suhler/Griswold]
8.23 Automation/Drive Interface - Commands (ADC) {Project 1558-D}
[Suhler/Griswold]
8.24 SCSI Enclosure Services - 2 (SES-2) {Project 1559-D} [Elliott]
9. Old Business
9.1 Style Guide [Moore]
9.2 Project Proposal for a SCSI Parallel Interface - 6 (SPI-6) Standard
(01-145) [Lohmeyer]
9.3 A/V Direct-Access Project Proposal (01-337) [Johannson]
9.4 Obsolete Reserve/Release (02-108r0) [Peterson]
10. New Business
10.1 Project Proposal for Serial Attached SCSI (02-098) [Lohmeyer]
10.2 Project Proposal for SCSI Architecture Model - 3 (02-118r1)
[Lohmeyer]
10.3 Project Proposal for Fibre Channel Protocol - 3 (02-138r1) [Peterson]
10.4 Actions on Parallel SCSI Working Group Recommendations
10.4.1 Accept the SPI-4 PR comment (02-129r0) [Houlder]
10.4.2 Link control message correction (02-150r1) [Galloway]
10.4.3 Negotiation Corrections (02-151r1) [Galloway]
10.5 Actions on CAP Working Group Recommendations
10.5.1 SBC-2, SSC-2, SMC-2 & OSD Support For All Registrants Persistent
Reservations (02-130r0) [Weber]
10.5.2 SMC-2 Proposal: Read Element Status Device Identifier (02-104r3)
[Banther]
10.5.3 SPC-3 AERC clarification (02-145r0) [Elliott]
10.5.4 SPC-3 Informational exceptions, linked commands, and CONDITION MET
(02-144r0) [Elliott]
10.5.5 SPC-3 Clearing effects of I_T nexus Loss (02-134r2) [Elliott]
10.6 Actions on Other Working Group Recommendations
10.7 Actions on SAS Study Group Recommendations
10.7.1 SAS REPORT MANUFACTURER ID (02-165r1) [Roberts]
10.7.2 ALIGN primitive encoding (02-168r1) [Galloway/Bastiani]
10.7.3 SAS Error primitive (02-167r1) [Galloway]
11. ISO/IEC
11.1 ISO/IEC Report [Robinson]
11.2 ISO/IEC Business [Robinson]
12. Liaison Reports
12.1 T11 Liaison Report [Forbes]
12.2 T13 Liaison Report [Colegrove]
12.3 SFF Industry Group [Allan]
12.4 IEEE 1394 [Johansson]
12.5 SCSI Trade Association (STA) [Jones/Aloisi]
12.6 IETF SCSI over IP [Black/Robinson]
13. Review of Action Items
14. Meeting Schedule
14.1 Authorization of Working Group Meetings
14.2 SBP-3 Tentative Meeting Schedule
15. Adjournment
Results of Meeting
1. Opening Remarks
John Lohmeyer, the T10 Chair, called the meeting to order at 9:00 a.m.,
Thursday May 2, 2002. He thanked Zane Daggett of Hitachi Cable Manchester for
hosting the meeting.
John said that INCITS Subgroup Membership forms and the T10 Mailing
Subscription form were available from the head table. He said that people
should use the INCITS forms to insure the INCITS Secretariat has the latest
membership information. These forms should be mailed directly to the INCITS
Secretariat.
As is customary, the people attending introduced themselves and a copy of the
attendance list was circulated. Copies of the draft agenda and general
information on T10 were made available to those attending.
2. Approval of Agenda
The draft agenda was approved with the following additions/changes:
8.1.1 INCITS Antitrust Guidelines
10.4.1 Accept the SPI-4 PR comment (02-129r0) [Houlder]
10.4.2 Link control message correction (02-150r1) [Galloway]
10.4.3 Negotiation Corrections (02-151r1) [Galloway]
10.5.1 SBC-2, SSC-2, SMC-2 & OSD Support For All Registrants Persistent
Reservations (02-130r0) [Weber]
10.5.2 SMC-2 Proposal: Read Element Status Device Identifier (02-104r3)
[Banther]
10.5.3 SPC-3 AERC clarification (02-145r0) [Elliott]
10.5.4 SPC-3 Informational exceptions, linked commands, and CONDITION MET
(02-144r0) [Elliott]
10.5.5 SPC-3 Clearing effects of I_T nexus Loss (02-134r2) [Elliott]
10.7 Actions on SAS Study Group Recommendations
10.7.1 SAS REPORT MANUFACTURER ID (02-165r1) [Roberts]
10.7.2 ALIGN primitive encoding (02-168r1) [Galloway/Bastiani]
10.7.3 SAS Error primitive (02-167r1) [Galloway]
No agenda items were added/revised during the course of the meeting.
3. Attendance and Membership
The membership requirements were reviewed. INCITS rules permit one vote per
organization. An individual from a new organization must attend at least one
T10 plenary meeting as an Advisory Member. He/she may apply for voting
membership at this meeting, which becomes effective following adjournment of
the meeting. Voting privileges begin upon receipt by the INCITS Secretariat of
applicable fees for the membership year.
To maintain membership, organizations must pay the INCITS Service Fee ($800).
John briefly discussed the mailing fees. Complete pricing information is
contained in the 2002 membership form (available at
ftp://ftp.t10.org/t10/mem_form.txt).
There are also minimum attendance requirements to maintain voting membership
on T10. If a member organization fails to attend two of the last three T10
meetings, they are warned that failing to attend the next T10 meeting would
result in their membership being terminated.
The Chair said he had sent letters to 15 people from 5 organizations informing
them that their membership was in jeopardy due to non-attendance (see
02-126r0) and that their membership would be terminated if they did not attend
this meeting. The following organizations were in attendance jeopardy:
Dell Computer Corp.
Hitachi Cable Manchester
Molex Inc.
QLogic Corp.
Tyco Electronics
All organizations in attendance jeopardy were present except:
QLogic Corp.
The members from QLogic were changed to non-voting status.
The following organization joined the committee at this meeting.:
Vixel
The T10 membership during the meeting was 43 organizations unchanged from 43
following the last meeting. Enclosure (1) is the list of the people present at
the meeting and enclosure (2) is the current T10 membership list.
The following organizations requested membership in T10 to take effect after
the meeting:
Conexant
Network Appliance
Unisys
Western Digital
John Lohmeyer reminded members that failure to vote on two out of the last
three letter ballots also would result in membership jeopardy and then
reported on the status of companies that have not voted on recent letter
ballots. Document 02-156r0 contains current letter ballot jeopardy
information. Molex Inc. is the only organization currently in letter ballot
jeopardy.
4. Approval of Minutes - March 2002 Meeting - Dallas, TX (T10/02-102r1)
The minutes were approved as written.
5. Document Distribution
Members who have any problems with their mailing subscription should deal
directly with Monica Vago (mvago at itic.org) (202) 626-5741.
John Lohmeyer requested that all documents for the next mailing be in his
hands in electronic format by 10:30 a.m. on Thursday May 9, 2002. Documents
received after this time may go into a subsequent mailing.
John reminded the committee of the requirements for document submission. Since
T10 meets its document retention requirements by preparing mailings, documents
included in the mailing must be suitable for archiving. This means that
native-format and/or Portable Document Format (PDF) electronic originals with
proper identification must be submitted.
People can obtain T10 document numbers and revised T10 document numbers by
filling out a web form at http://www.t10.org/members/. The assigned T10
document number will be sent to the requestor by e-mail. The requestor may
then reply to this email, including the document to be posted as an
attachment. The document will be automatically posted on the T10 web site.
T10 members can complete this entire process using their personal T10
password. John explained that members who do not know their password should
surf to the above URL and click on the "forgot password" link to have their
password sent to them via e-mail.
John noted that non-members can also use the above document number process,
but their requests will require approval by an administrator.
Minutes are available on the T10 World Wide Web page (see below), and are
distributed to the T10 Reflector.
To be added to the T10 Reflector, send an e-mail to majordomo at t10.org with the
line 'subscribe t10' in the message body.
The INCITS Secretariat maintains a World Wide Web page at:
http://www.incits.org/.
LSI Logic maintains a web site on behalf of T10 on a server donated by the
SCSI Trade Association at:
http://www.t10.org/
There is also a mirror site at:
http://www.t11.org/t10/
The current document register is enclosure (3). The T10 document register is
also available at:
ftp://ftp.t10.org/t10/dr.txt
6. Call for Patents
This is a regular agenda item to identify any potential patent issues with
developing standards and technical reports.
A document is available from ANSI, "Procedures for the Development and
Coordination of American National Standards", at no charge. This document is
also on the WWW at http://www.incits.org/help/ansi_sdo.html. Section 1.2.11
contains the ANSI patent policy. Amy Marasco manages patent issues for ANSI
and can be contacted at amarasco at ansi.org or 212-642-4954. Gene Milligan
prepared a useful "Handy dandy Technical Committee's Patents Guide", which is
available at ftp://ftp.t10.org/t10/document.99/99-291r0.pdf.
John presented a foil containing a summary of the ANSI patent policy prepared
by Gary Robinson. The summary is also included on the Rules and Procedures
(plus Patent Information) page on the T10 web site.
Cris Simpson reported that a statement of the Intel patent policy can be found
in T10/01-041r0.
John asked that anyone who knows of applicable patents contact him.
Michael Banther notified John that a detailed patent disclosure regarding the
ADI project would be made at the next meeting.
7. Review of Old Action Items
457 John Lohmeyer will forward 02-010r0 to INCITS for processing as a new
project proposal for ADI Physical Layer. Complete.
458 John Lohmeyer will forward 02-009r0 to INCITS for processing as a new
project proposal for ADI Transport Protocol. Complete.
459 John Lohmeyer will forward 02-008r0 to INCITS for processing as a new
project proposal for ADI Commands. Complete.
460 Ralph Weber will prepare SAM-2 revision 23. Complete.
461 John Lohmeyer will conduct a letter ballot on forwarding SAM-2 revision
23 to first public review. Complete.
462 John Lohmeyer will inform INCITS that T10 recommends reaffirmation of
X3.91M:1987 [R1997] Storage Module Interfaces (SMD-E). Complete.
463 John Lohmeyer will inform INCITS that T10 recommends reaffirmation of
X3.301:1997 SCSI-3 Primary Commands (SPC), X3.301:1997 SCSI-3 Primary Commands
(SPC). Complete.
464 John Lohmeyer will inform INCITS that T10 recommends reaffirmation of
NCITS 309:1997 Serial Storage Architecture - SCSI-3 Protocol (SSA-S3P).
Complete.
465 John Lohmeyer will inform INCITS that T10 recommends reaffirmation of
NCITS 307:1997 Serial Storage Architecture - Physical Layer 2 (SSA-PH2).
Complete.
466 John Lohmeyer will inform INCITS that T10 recommends reaffirmation of
NCITS 308:1997 Serial Storage Architecture - Transport Layer 2 (SSA-TL2).
Complete.
467 John Lohmeyer will inform INCITS that T10 is unable to reach a
consensus vote regarding reaffirmation or withdrawal of X3.304:1997 SCSI-3
Multimedia Commands (MMC). Complete.
468 Ralph Weber will send the IR a new FCD for SPC-2 that incorporates
02-056r2.
469 John Lohmeyer will forward 02-094r0 to INCITS for processing as a new
project proposal for SCSI Enclosure Services -2 (SES-2). Complete.
470 John Lohmeyer will inform INCITS that the sense of T10 is that
X3/TR-16:1997 Technical Report for Generic Packetized Protocol (GPP) is not
currently valid or useful. Complete. John noted that the GPP motion at the
last meeting had required a 2/3rds vote instead of a simple majority.
Consequently, the motion had not passed and INCITS will not take any actions
on GPP.
471 John Lohmeyer will request INCITS to investigate creation of an
"Obsolete" category for standards where the standards are available for
purchase but clearly marked as "No Longer Recommended for Implementation."
Complete.
8. Project Status Reports
8.1 Project Status Summary and INCITS Liaison [Lohmeyer]
John Lohmeyer said that the current T10 project status summary was included in
the T10 Information Packages distributed prior to the meeting and will be
included in the mailing as usual.
8.1.1 INCITS Antitrust Guidelines
John Lohmeyer reported that INCITS has developed a new set of antitrust
guidelines that they require be included in each subgroups minutes
periodically. There is a link to these guidelines on the T10 web site at
http://www.t10.org/t10_info.htm.
Antitrust Guidelines
ITI counsel developed the INCITS Antitrust Guidelines for the protection of
INCITS and INCITS Subgroup members on antitrust issues. INCITS and INCITS
Subgroup members must follow the INCITS Antitrust Guidelines.
Anticipate Risks
INCITS and INCITS subgroup meetings must be conducted in a manner that avoids
the appearance of conduct which might violate the antitrust laws. The harsh
criminal penalties in the antitrust laws, for individuals as well as
organizations, the high costs of defending antitrust suits, the diversion of
resources from our important missions, and the risk of liability together
mandate an understanding of, and respect for, the antitrust laws by INCITS and
its members. Our objective is to create a climate where antitrust risks are
both anticipated and avoided.
Consult Counsel
Legal counsel should be consulted prior to any discussion of actions which the
staff or INCITS believes could raise antitrust issues, or which seem in any
way to be questionable or out of the ordinary. It is counsel's job to advise
INCITS on any matters that have legal significance. It is always better to
ask.
Notice and Agenda
Each INCITS or INCITS subgroup meeting must be preceded by a notice to the
members of the committee with a draft agenda. As required by INCITS
procedures, the agenda must be approved at the beginning of the meeting and
followed.
Conduct of Meetings INCITS policy requires the full-time attendance of a
member of the INCITS staff at every meeting sponsored by INCITS, except where
otherwise approved. All participants should be afforded an opportunity to
present their views. Acting on behalf of INCITS, INCITS staff or an INCITS
officer or subgroup officer have the responsibility to terminate any
discussion, seek counsel's advice or, if necessary, terminate any meeting if
the discussion might be construed to raise questions under the INCITS
antitrust guidelines.
Minutes of Meetings
After each INCITS or INCITS subgroup meeting, concise minutes must be prepared
that accurately describe the actions taken, the justification for those
actions, and where appropriate, additional pertinent discussion. These minutes
must be prepared by a member of the INCITS staff or someone designated by an
INCITS officer to prepare the minutes. When prepared by someone other than a
member of the INCITS staff, the draft minutes shall be reviewed by the INCITS
staff prior to distribution to the committee.
Sensitive Topics
With rare exceptions that should be made only upon the advice of INCITS
counsel, there should never be discussion of the following topics at any
INCITS or an INCITS subgroup meeting:
. Any company's prices or pricing policies;
. Specific R&D, sales and marketing plans;
. Any company's confidential product, product development or production
strategies;
. Whether certain suppliers or customers will be served;
. Prices paid to input sources; or
. Complaints about individual firms or other actions that might
tend to hinder a competitor in any market.
Standards
In INCITS sponsored committees related to standards, all relevant opinions
should be considered and a sound technical basis for the INCITS position
should be articulated. When participating in other standard-setting bodies on
behalf of INCITS, INCITS representatives should be guided by both the letter
and the spirit of the established procedures, which are designed to ensure
that the process is open to all interested parties and standards are based on
objective technical factors. INCITS members should voluntarily disclose any
proprietary interest they may have in proposed standard in order to reduce the
risk of antitrust liability.
Educational Presentations
Sharing non-proprietary information among competitors is generally lawful.
Discussion should be limited to objectives, which promote overall consumer
welfare. Exchanging proprietary information may not be appropriate, if the
purpose or effect of the exchange is to lead to diminished competition in the
marketplace.
8.2 SCSI Fibre Channel Protocol - 2 (FCP-2) {Project 1144-D} [Snively]
John Lohmeyer reported that FCP-2 is still awaiting editor work to resolve a
font issue, and the INCITS letter ballot is delayed until the editorial issues
are resolved.
8.3 SCSI Architecture Model - 2 (SAM-2) {Project 1157-D} [Weber]
John Lohmeyer reported that the SAM-2 forwarding letter ballot passed
33:7:1:2=43 (see 02-123r1 for complete results). Ralph Weber reported that the
SAM-2 letter ballot comments resolution document is 02-155, the current
revision is r0 and an r1 will be prepared based on the results agreed by the
CAP working group (minutes 02-160). It is anticipated that the comments
resolution will be completed during special meeting times scheduled at the
July meeting week. Voting on the resolutions will occur in September.
8.4 MultiMedia Command Set - 3 (MMC-3) {Project 1363-D} [McFerrin]
John Lohmeyer reported that the INCITS letter ballot on approval closes May
10th.
8.5 SCSI Parallel Interface - 4 (SPI-4) {Project 1365-D} [Penokie]
John Lohmeyer reported that the SPI-4 public review closed April 8th with one
comment received from Gerry Houlder. Resolution of the comment is covered
under item 10.4.1.
George Penokie reported that ISO SPI-3 is in final ISO editing and has
received some requests for changes from the ISO editor. The draft containing
those is revision 3 for ISO. George described some of the editorial changes.
He noted that ISO acceptance of the revised draft is anticipated.
8.6 SCSI Domain Validation Technical Report (SDV) {Project 1378-DT}
[Gibbons]
John Lohmeyer reported that SDV should be published as INCITS/TR-28:2002 later
this month.
8.7 SCSI Medium Changer Commands - 2 (SMC-2) {Project 1383-D} [Oetting]
Erich Oetting reported that revision 4 was in the last meeting. Two proposals
to be considered at this meeting will affect SMC-2. Erich stated that he might
want to conduct a letter ballot on forwarding SMC-2 revision 5 sometime before
the next meeting.
8.8 SCSI Signal Modeling (SSM) {Project 1414-DT} [Aloisi/Barnes]
John Lohmeyer reported that SSM should be published as INCITS/TR-29:2002 later
this month. Larry Barnes agreed to continue on as SSM editor to finish the
publication process.
8.9 SCSI RDMA Protocol (SRP) {Project 1415-D} [Simpson]
Cris Simpson reported that he is finishing up the letter ballot resolution
(01-328). He stated that a vote on accepting the resolution is expected in
July.
8.10 SCSI Primary Commands - 3 (SPC-3) {Project 1416-D} [Weber]
Ralph Weber reported that SPC-3 revision 6 contains all T10 approved proposals
as of the last meeting and that SPC-3 revision 7 will be available in time for
the next mailing. Ralph reminded the group of the following SPC-3 dates (see
02-110):
o Editorial review meetings begin in November, 2002
o Last new commands and data formats proposals accepted in March, 2003
o Last change proposals accepted and letter ballot commences in May, 2003
Ralph Weber moved that SPC-3 revision 7 be accepted as the committee working
draft for project 1416-D. John Lohmeyer seconded the motion. The motion passed
on a vote of 36:0:0:7=43.
8.11 SCSI Block Commands - 2 (SBC-2) {Project 1417-D} [Elliott]
Rob Elliott reported that revision 6 will be available in time for the mailing
and will contain the changes approved by this meeting.
8.12 Object-based Storage Devices Commands (OSD) {Project 1355-D} [Weber]
Ralph Weber reported that OSD revision 5 is the current draft. The SNIA OSD
working group met on 23 April and resolved to:
o Use Data-In and Data-Out buffers for only user data or only
command/parameter data, but to reserve CDB fields to allow segmentation of the
buffers for user data and command/parameter data;
o Limit the size of the capabilities parameters to what will fit in the
OSD variable length CDB; and
o Work on defining the OSD attributes so that the CDB format can be
finalized by the end of May.
Ralph noted that conference calls are planned by the SNIA group to discuss the
above agreements.
Ralph stated that OSD revision 6 containing the finalized CDB formats will be
available at the end of May, not in time for the next mailing.
8.13 SCSI Stream Commands - 2 (SSC-2) {Project 1434-D} [Peterson]
Dave Peterson reported on the activities of the SSC-2 working group on letter
ballot comments resolution (minutes in 02-137). This SSC-2 letter ballot
comments resolution document is 02-081.
The issues being worked on in the SSC-2 comments resolution process are:
o TapeAlert,
o Undecompressable data,
o Recording setmarks, and
o Out of order command detection and processing.
The goal is to complete comments resolution in September.
8.14 SCSI Passive Interconnect Performance (PIP) {Project 1439-D} [Daggett]
Zane Daggett reported that PIP is moving along much faster than in the past
and several editor's meetings are planned to cleanup the document. Revision 2
of the document is anticipated near the end of May, but not in time for the
mailing. Letter ballot is anticipated following the July meeting.
8.15 SCSI Serial Bus Protocol -3 (SBP-3) {Project 1467-D} [Johansson]
In the absence of Peter Johansson, no report was available.
8.16 SCSI Signal Modeling - 2 (SSM-2) {Project 1514-D} [Aloisi/Manildi]
Paul Aloisi reported on the activities of the SSM-2 working group (minutes in
02-132) and provided an electronic report in 02-176r0. He noted that Bruce
Manildi has agreed to be the SSM-2 Technical Editor.
8.17 SCSI RDMA Protocol - 2 (SRP-2) {Project 1524-D} [Simpson]
Cris Simpson reported that work on SRP-2 is on hold until the SRP letter
ballot resolution is finished which is anticipated in July. Cris asked the
group to prepare for a discussion of SRP-2 requirements at the July CAP
meeting.
8.18 SCSI Parallel Interface - 5 (SPI-5) {Project 1525-D} [Penokie]
George Penokie reported that SPI-5 rev 0 was posted last Friday. He reviewed
the status of SPI-5 and the activities related to SPI-5 in the Parallel SCSI
working group (minutes in 02-161). He stated that revision 1 will be available
in time for the mailing and that a letter ballot is planned after the November
T10 meeting.
8.19 SCSI Management Server Commands (MSC) {Project 1528-D}
[Penokie/Elliott]
George Penokie reported that MSC work will be restarting toward the end of the
year.
8.20 MultiMedia Command Set - 4 (MMC-4) {Project 1545-D} [McFerrin]
Bill McFerrin reported that the disclosure has finally been received for
DVD+MRW, allowing critical MMC-4 work to proceed. Another major issue for the
MMC-4 working group is obsolescence, because each new CD/DVD technology
generation discards parts of the old command set but all of the old currently
is documented along with the new.
8.21 Automation/Drive Interface - Physical Layer (ADP) {Project 1556-D}
[Suhler/Griswold]
Bob Griswold reported on the activities of the ADI working group (minutes in
02-147).
8.22 Automation/Drive Interface - Transport Protocol (ADT) {Project 1557-D}
[Suhler/Griswold]
This topic was covered in item 8.21.
8.23 Automation/Drive Interface - Commands (ADC) {Project 1558-D}
[Suhler/Griswold]
This topic was covered in item 8.21.
8.24 SCSI Enclosure Services - 2 (SES-2) {Project 1559-D} [Elliott]
Rob Elliott reported that discussion of SES-2 proposals will begin in July.
9. Old Business
9.1 Style Guide [Moore]
In the absence of Dennis Moore, there was no report on the style guide
activities.
9.2 Project Proposal for a SCSI Parallel Interface - 6 (SPI-6) Standard
(01-145) [Lohmeyer]
John Lohmeyer asked that discussion of this topic be deferred to the next
meeting.
9.3 A/V Direct-Access Project Proposal (01-337) [Johannson]
In the absence of Peter Johansson, discussion of this topic be deferred to the
next meeting.
9.4 Obsolete Reserve/Release (02-108r0) [Peterson]
Dave Peterson moved that 02-108r0 be approved for inclusion in SPC-3. Bill
Galloway seconded the motion. The motion passed on a vote of 31:2:2:8=43.
10. New Business
10.1 Project Proposal for Serial Attached SCSI (02-098) [Lohmeyer]
John Lohmeyer led a discussion of the Serial Attached SCSI project proposal
(02-098r0).
John Lohmeyer moved that T10 accept 02-098r0 for further processing at INCITS
as a new project proposal. Mark Evans seconded the motion. The motion passed
on a vote of 28:0:1:14=43.
Roger Cummings stated that his abstention is based on no being materially
affected by the action.
John Lohmeyer took an action item to forward 02-098r0 to INCITS as a new
project proposal for Serial Attached SCSI (SAS).
10.2 Project Proposal for SCSI Architecture Model - 3 (02-118r1) [Lohmeyer]
John Lohmeyer led a discussion of the SAM-3 project proposal, noting that CAP
working group requested editorial changes and unanimously recommended approval
of the revised project proposal.
George Penokie moved that T10 accept 02-118r1 for further processing at INCITS
as a new project proposal. Bill Galloway seconded the motion. The motion
passed on a vote of 29:0:0:14=43.
John Lohmeyer took an action item to forward 02-118r1 to INCITS as a new
project proposal for SCSI Architecture Model -3 (SAM-3).
10.3 Project Proposal for Fibre Channel Protocol - 3 (02-138r1) [Peterson]
Dave Peterson and John Lohmeyer reviewed the FCP-3 project proposal, noting
that several corrections were requested by the CAP working group. John
reported that the CAP working group unanimously recommended approval of the
FCP-3 project proposal.
Dave Peterson moved that T10 accept 02-138r1 for further processing at INCITS
as a new project proposal. Brian Forbes seconded the motion. The motion passed
on a vote of 29:0:0:14=43.
John Lohmeyer took an action item to forward 02-138r1 to INCITS as a new
project proposal for Fibre Channel Protocol -3 (FCP-3).
10.4 Actions on Parallel SCSI Working Group Recommendations
10.4.1 Accept the SPI-4 PR comment (02-129r0) [Houlder]
George Penokie reviewed the SPI-4 public review comment (02-129r0). He noted
that the working group recommended accepting the changes requested in the
comment on a vote of 9:3:7. The working group also declared that the changes
requested are substantive.
Gerry Houlder moved that the editor be instructed to modify SPI-4 as described
in the public review comment (02-129r0). Paul Aloisi seconded the motion.
Mark Evans asked that everyone understand that this issue results from
designing to "e.g. examples" and admonished everyone not to design to
examples.
The motion passed on a vote of 26:2:5:10=43:
Mark Evans and Ron Roberts stated that their reason for voting no was a desire
not to change the document and undergo a second public review.
All those who abstained stated that their reason was that they were not
materially affected by the decision.
10.4.2 Link control message correction (02-150r1) [Galloway]
George Penokie described the contents of the 02-150r1 and 02-151r1 proposals.
He noted that, although the proposals were recommended by the working group
for SPI-5, the fact that SPI-4 will undergo substantive change as a result of
the public review comment resolution should be a motivation to T10 to include
these corrective proposals in SPI-4 too.
Bill Galloway moved that 02-150r1 and 02-151r1 be approved for inclusion in
SPI-4 and SPI-5. Mark Evans seconded the motion. The motion passed on a vote
of 31:0:2:10=43.
George Penokie took an action item to prepare SPI-4 revision 10 including the
resolution to the public review comment (02-129r0), the approved proposals
02-151r1, 02-151r1, and other editorial corrections agreed by the working
group.
George Penokie moved that T10 accept the substantive public review comment and
that SPI-4 revision 10 including substantive changes be forward to INCITS for
processing toward second public review. Erich Oetting seconded the motion. The
motion passed on a roll call vote of 24:2:5:12=43, details of the vote were as
follows:
Organization Stat Name Yes No Abs NP
Adaptec, Inc. P Mr. Ron Roberts 1
Amphenol Interconnect 1
Andiamo Systems, Inc. 1
BREA Technologies, Inc. P Mr. Bill Galloway 1
Brocade Comm. Systems, Inc. P Mr. Brian Forbes 1
Cisco Systems, Inc. P Mr. David Peterson 1
Compaq Computer Corp. P Mr. Robert C. Elliott 1
Congruent Software, Inc. 1
Crossroads Systems, Inc. P Mr. Robert Griswold 1
Dallas Semiconductor P Mr. Titkwan Hui 1
Dell Computer Corp. A Mr. Ronald Stockford 1
EMC Corp. 1
Emulex 1
ENDL Texas P Mr. Ralph O. Weber 1
Exabyte Corp. 1
FCI 1
Fujitsu 1
General Dynamics 1
Hewlett Packard Co. P Mr. Randy Haagens 1
Hitachi Cable Manchester A Mr. Randy Wasylak 1
IBM / Tivoli Systems P Mr. George O. Penokie 1
Intel Corp. P Mr. Cris Simpson 1
Iomega Corp. 1
KnowledgeTek, Inc. 1
LSI Logic Corp. P Mr. John Lohmeyer 1
Maxtor Corp. P Mr. Mark Evans 1
Microsoft Corp. P Ms. Emily Hill 1
Molex Inc. P Mr. Jay Neer 1
Nishan Systems Inc. P Mr. Charles Monia 1
Ophidian Designs P Mr. Edward A. Gardner 1
Panasonic Technologies, Inc P Dr. Terence J. Nelson 1
Philips Electronics/CD Edge P Mr. William P. McFerrin 1
Pirus Networks A Mr. Milan Merhar 1
Quantum Corp. P Mr. Paul Entzel 1
Seagate Technology P Mr. Gerald Houlder 1
Silicon Image 1
Storage Technology Corp. P Mr. Erich Oetting 1
Sun Microsystems, Inc. P Mr. Vit Novak 1
Texas Instruments P Mr. Paul D. Aloisi 1
Toshiba America Elec. Comp. P Mr. Tasuku Kasebayashi 1
TycoElectronics A# Mr. Michael Wamsley 1
Veritas Software P Mr. Roger Cummings 1
Vixel Corp. P Mr. Kenneth Hirata 1
24 2 5 12 = 43
George Penokie accepted an action item to revise SPI-4. John Lohmeyer accepted
an action item to forward SPI-4 rev 10 to INCITS, which resolves the public
review comment by making substantive changes to SPI-4, and to formally respond
to the public review comment.
10.4.3 Negotiation Corrections (02-151r1) [Galloway]
This item was handled as part of item 10.4.2.
10.5 Actions on CAP Working Group Recommendations
10.5.1 SBC-2, SSC-2, SMC-2 & OSD Support For All Registrants Persistent
Reservations (02-130r0) [Weber]
Ralph Weber explained that the purpose of 02-130r0 was propagating persistent
reservations changes already make in SPC-3 revision 6 to the other command set
documents and noted that it had been unanimously recommended by the CAP
working group.
Ralph Weber moved that 02-130r0 be approved for inclusion in SBC-2, SSC-2,
SMC-2 and OSD. Rob Elliott seconded the motion. The motion passed on a vote of
29:0:1:13=43.
10.5.2 SMC-2 Proposal: Read Element Status Device Identifier (02-104r3)
[Banther]
George Penokie described 02-104r3 as affecting the medium changer Read Element
Status command and noted that it was unanimously approved by the CAP working
group.
Erich Oetting moved that 02-104r3 be approved for inclusion in SMC-2. Paul
Entzel seconded the motion. The motion passed on a vote of 30:0:1:12=43.
10.5.3 SPC-3 AERC clarification (02-145r0) [Elliott]
George Penokie explained that 02-145r0 and 02-144r0 are clarifications of long
standing SPC features. Ralph Weber explained that 02-134r2 is still a work in
progress but that the CAP working group recommended that specific parts of the
proposal be incorporated immediately in SPC-3 to support development of the
SRP and iSCSI protocol standards. The working group supported this
recommendation on a vote of 14:1:6.
Rob Elliott moved that 02-145r0 and 02-144r0 be approved for inclusion in
SPC-3 and that those parts of 02-134r2 dealing with SPC-3 changes other than
changes relating to mode pages also be approved for inclusion in SPC-3. Bill
Galloway seconded the motion. The motion passed on a vote of 29:0:3:11=43.
10.5.4 SPC-3 Informational exceptions, linked commands, and CONDITION MET
(02-144r0) [Elliott]
This item was handled as part of item 10.5.3.
10.5.5 SPC-3 Clearing effects of I_T nexus Loss (02-134r2) [Elliott]
This item was handled as part of item 10.5.3.
10.6 Actions on Other Working Group Recommendations
No recommendations from other working groups were brought before the
committee.
10.7 Actions on SAS Study Group Recommendations
10.7.1 SAS REPORT MANUFACTURER ID (02-165r1) [Roberts]
George Penokie and Bill Galloway reviewed the contents of 02-165r1, 02-168r0,
and 02-167r1.
Ron Roberts moved that the SAS editor be instructed to incorporate 02-165r1,
02-168r0, and 02-167r1 in SAS revision 0. Mark Evans seconded the motion. The
motion passed on a vote of 28:0:3:12=43.
10.7.2 ALIGN primitive encoding (02-168r1) [Galloway/Bastiani]
This item was handled as part of item 10.7.1.
10.7.3 SAS Error primitive (02-167r1) [Galloway]
This item was handled as part of item 10.7.1.
11. ISO/IEC
11.1 ISO/IEC Report [Robinson]
On behalf of Gary Robinson, John Lohmeyer reported that the ISO/IEC status is
unchanged since March, the March ISO status report can be found in 02-105r0.
Gary also asked that John note that 02-154 contains a summary of routine
procedures and motions plus various appropriate forms.
11.2 ISO/IEC Business [Robinson]
No ISO business was brought before the meeting.
12. Liaison Reports
12.1 T11 Liaison Report [Forbes]
Brian Forbes presented the T11 liaison report contained in T10/02-164r1.
12.2 T13 Liaison Report [Colegrove]
Dan Colegrove presented the following electronic report from Pete McLean:
T13 Liaison Report - April 24, 2002
T13 met last in Longmont, CO on April 23 with 20 people present. Membership is
currently 22 voting organizations.
Maintenance was required on ATA -3, ANSI X3.298-1997, by June 18. The
committee voted to withdraw ATA-3.
The ATA/ATAPI-6 draft standard, T13/1410D, is currently at second public
review closing 13 May 2002.
BIOS Enhanced Disk Drive Services draft standard, T13/1484D, is currently at
first public review closing 13 May 2002.
Host Adapter Standard, T13/1510D, was reviewed. Technical content appears to
be complete except for identifying the version of the ADMA standard the host
adapter conforms to.
The ATA/ATAPI-7, T13/1532D,.is in development. Proposals to obsolete the SEEK
command and to reserve opcodes, ID words, SET FEATURES subcommands, and log
pages for use by Serial ATA were approved for inclusion.
The Serial ATA consortium has notified T13 that the Serial ATA specification
1.0 will be forwarded to T13 for the development of an ANSI standard when
technology and specification validation is complete. This is expected to
happen the first half of 2003.
Phoenix Technologies will host the next plenary meeting June 25-26, 2002 at
the Phoenix facility, 135 Technology Drive, Irvine, CA 92618. The meeting will
start at 9 AM.
For further T13 information access ftp.t13.org or www.t13.org.
12.3 SFF Industry Group [Allan]
In the absence of Dal Allan, no report was available.
12.4 IEEE 1394 [Johansson]
In the absence of Peter Johansson, Bob Davis reported that 1394b was approved
at the March IEEE meeting.
12.5 SCSI Trade Association (STA) [Jones/Aloisi]
Paul Aloisi reported on the activities of STA and provided an electronic
report that can be found in 02-177r0.
12.6 IETF SCSI over IP [Black/Robinson]
In the absence of David Black, no report was available.
13. Review of Action Items
472 Russ Brown will provide the SPI-5 editor with information suitable to
developing the receive masks for Fast 320.
473 John Lohmeyer will to forward 02-098r0 to INCITS as a new project
proposal for Serial Attached SCSI (SAS). Complete.
474 John Lohmeyer will to forward 02-118r1 to INCITS as a new project
proposal for SCSI Architecture Model -3 (SAM-3). Complete.
475 John Lohmeyer will to forward 02-138r1 to INCITS as a new project
proposal for Fibre Channel Protocol -3 (FCP-3). Complete.
476 George Penokie will prepare SPI-4 revision 10 including the resolution
to the public review comment (02-129r0), the approve proposals 02-151r1,
02-150r1, and other editorial corrections agreed by the working group.
Complete.
477 John Lohmeyer will to forward SPI-4 revision 10 including substantive
changes to INCITS for processing towards second public review. Complete.
478 John Lohmeyer will formally respond to the public review comment on
SPI-4. Complete.
14. Meeting Schedule
The next plenary meeting of T10 will be Thursday July 18, 2002 in Colorado
Springs, CO at the Wyndham Colorado Springs Hotel (719-260-1800), hosted by
LSI Logic Corp. The meeting will begin at 9:00 a.m. on Thursday.
The meeting list for the next plenary week is:
July 2002 Meeting Map
(2002/05/02 Version)
Monday 7/15 9 10 11 12 1 2 3 4 5 6 7 8 9
+===================+
| SSC-2 WG | (20)
+===============+===================+===+
| Par. SCSI WG |SAS Protocol WG | (50)
+===============+=======================+
| SAS PHY WG | (25)
+=======================+
Tuesday 7/16 8 9 10 11 12 1 2 3 4 5 6 7 8 9
+===========================================+
| SAS Protocol WG | (50)
+===============================+===========+
| SAS PHY WG | (25)
+===============================+
| ADI WG (tape library) | (15)
+===============================+===+
| SBP-3 WG | (10)
+===================================+
| T11 Ad Hocs | (15)
+-----------------------------------+
Wednesday 7/17 9 10 11 12 1 2 3 4 5 6 7 8 9
+==========================================+
| SCSI Commands, Arch., & Protocol WG | (35)
+===============================+==========+
| MMC WG | (10)
+===================+===========+-------+
| STA Tech | SFF SSWG | (20)
+===================+================+--+
| SBP-3 WG | (10)
+====================================+
Thursday 7/18 8 9 10 11 12 1 2 3 4 5 6 7 8
+=================+=====================+
| T10 Plenary | SAM-2 LB cmnt res(*)| (50/20)
+-+========+========+=========+===========+
|STA Marcom| SCSI Trade Assoc |<--{Closed meetings} (25)
+----------+------------------+
(*) - Meeting begins 1 hour after T10 meeting
Friday 7/19 8 9 10 11 12 1 2 3 4 5 6 7 8
+=============+
|SAM-2 LB res | (15)
+=============+
Meetings marked with == are T10-authorized meetings.
Meetings marked with -- are other groups and may change without notice.
Other T10-authorized meetings:
Meeting Date Location / Contact
-------------- ------------------ --------------------------------------
PIP Edit 05/17/02 Shrewsbury, MA / Ham
SBP-3 WG 05/29-30/02 Portland, OR / Johansson
PIP Edit 06/03/02 Shrewsbury, MA / Ham
SAS Prot WG 06/05-07/02 Minneapolis, MN / Coomes
SAS PHY WG 06/05-07/02 Minneapolis, MN / Coomes
SSM Edit 06/18/02 Lisle, IL / Molex
SSM WG 06/19/02 Lisle, IL / Molex
PIP WG 06/20/02 Lisle, IL / Molex
SAS Prot WG 06/24-26/02 Denver, CO / Lohmeyer
SAS Prot Calls Weekly Tuesday am To be announced via T10 reflector
SAS PHY Calls Weekly Monday pm To be announced via T10 reflector
SRP Conf. Calls Weekly Friday am To be announced via T10 reflector
PIP Edit 08/13/02 Buena Park, CA / Actuone-Foxconn
PIP WG 08/14/02 Buena Park, CA / Actuone-Foxconn
SSM WG 08/15/02 Buena Park, CA / Actuone-Foxconn
SAS Prot WG 08/21-23/02 TBD / TBD
Map Abbreviation Key:
ADI: Automation Drive Interface (tape library interface)
Amnd: Amendment
CAP: Commands, Architecture, and Protocols
Fast-80: Data Transfer at 80 Mega-transfers/sec. (a.k.a., Ultra3,Ultra160)
Fast-160: Data Transfer at 160 Mega-transfers/sec. (a.k.a., Ultra320)
FC: Fibre Channel
I/F: Interface
IETF: Internet Engineering Task Force (the group that sets
Internet standards)
iFC: Internet Fibre Channel
IPS: Internet Protocol SCSI
iSCSI: Internet SCSI
LB: Letter Ballot
MMC: Multimedia Commands (CD-ROM, DVD, etc.)
OSD: Object-based Storage Device
Par.: Parallel (e.g., SPI-n)
PH or PHY: Physical (Connectors, Cables, Transceivers, etc.)
PIP: (SCSI) Passive Interconnect Performance
Plenary: Full Committee Meeting
Res: Resolution
SAS: Serial Attached SCSI
SBC-2: SCSI Block Commands - 2
SCSI: Small Computer System Interface
SES: SCSI Enclosure Services
SFF: SFF Industry Group (not an NCITS activity)
SG: Study Group
SMC-2: SCSI Medium Changer - 2 Commands
SPC-3: SCSI Primary Commands - 2 (3rd generation)
SPI-4: Fourth Generation SCSI Parallel Interface
SPI-5: Fifth Generation SCSI Parallel Interface
SRP: SCSI RDMA Protocol (was SVP)
SRP-2: SCSI RDMA Protocol (2nd generation)
SSC-2: SCSI Stream Commands - 2 (includes Tape)
SSM-2: SCSI Signal Modeling (2nd generation)
SSWGs: Specific-Subject Working Groups
STA: SCSI Trade Association (Closed meeting -- not an NCITS activity)
STA Marcom: STA Marketing Communications (Closed meeting -- not an NCITS
activity)
STA Tech: STA Technical Meeting (T10 members invited)
T10: Lower Level Interfaces Technical Committee
T11: Device Level Interfaces Technical Committee
WG: Working Group (same as Ad Hoc Group)
For more information about T10 activities, please contact the following
people:
Activity Contact Telephone/Email
---------------------------- --------------- ------------------------------
ADP, ADT, ADC Bob Griswold (512) 928-7272
rgriswold at crossroads.com
EPI Bill Ham (508) 841-2629
bill_ham at ix.netcom.com
PIP, PIP-2 Zane Daggett (603) 669-4347 x236
zdaggett at hcm.hitachi.com
FCP-2, SES Robert Snively (408) 487-8135
rsnively at brocade.com
SBC-2, SES-2, SAS Rob Elliott (281) 518-5037
Robert.Elliott at compaq.com
MMC-2, MMC-3, MMC-4 Bill McFerrin (303) 651-5400
bill.mcferrin at cdedge.com
SBP-2 or RBC Pete McLean (303) 678-2149
pete_mclean at maxtor.com
SBP-2, SBP-3 Peter Johansson (510) 527-3926
PJohansson at ACM.org
SCC-2, SPI-4, SPI-5, MSC George Penokie (507) 253-5208
gpenokie at tivoli.com
SDV Terry Gibbons (719 533-7499
terry.gibbons at lsil.com
SMC, SMC-2 Erich Oetting (303) 673-2178
Erich_Oetting at Stortek.com
SPC-3, SAM-2, SAM-3, OSD Ralph Weber (214) 912-1373
roweber at acm.org
SSC, SSC-2, FCP-3 Dave Peterson (612) 802-3299
dap at cisco.com
SRP, SRP-2 Cris Simpson (503) 712-4333
cris.simpson at intel.com
SSM, SSM-2 Paul Aloisi (603) 222-8687
paul_aloisi at ti.com
Other Activities John Lohmeyer (719) 533-7560
lohmeyer at t10.org
The long-term T10 meeting week schedule is:
Date Location Host/Comments
------------------ ------------------------- -----------------------------
Jul 15-19, 2002 Colorado Springs, CO LSI Logic
Sep 9-13, 2002 Minneapolis, MN Cisco / [CHANGED]
Nov 4-8, 2002 Huntington Beach, CA QLogic
Jan 13-17, 2003 Portland, OR Intel
Mar 10-14, 2003 Dallas, TX T.I.
May 5-9, 2003 Nashua, NH Hitachi Cable
Jul 14-18, 2003 Colorado Springs, CO LSI Logic
Sep 8-12, 2003 Seattle, WA Microsoft
Nov 3-7, 2003 Austin, TX Crossroads
14.1 Authorization of Working Group Meetings
John noted that the working group meetings are required to operate under the
same voting procedures as does T10 (that is, one vote per organization) and
the results of a working group are not binding on the parent committee. Ad hoc
groups should strive to achieve consensus prior to bringing issues to T10.
Charles Monia moved that T10 authorize the T10-related meetings and events in
the list above that had not previously been approved through the end of August
2002. Ron Stockford seconded the motion. In the absence of any objections, the
motion passed unanimously.
14.2 SBP-3 Tentative Meeting Schedule
Peter Johansson provided the following tentative meeting schedule for the
SBP-3 working group:
May 29 - 30 (Portland, OR)
July 16 - 17 (Colorado Springs, CO) [two-day meeting that week]
15. Adjournment
The meeting was adjourned at 11:20 a.m. on Thursday May 2, 2002.
Enclosure(1) -- Meeting Attendees
Name S Organization Electronic Mail Address
---------------------- -- ------------------------- -------------------------
Mr. Ron Roberts P Adaptec, Inc. Ron_Roberts at adaptec.com
Mr. Michael Wingard P Amphenol Interconnect mikwingard at aol.com
Mr. Bill Galloway P BREA Technologies, Inc. billg at breatech.com
Mr. Brian Forbes P Brocade Comm. Systems, bforbes at brocade.com
Inc.
Mr. David Peterson P Cisco Systems, Inc. dap at cisco.com
Mr. Robert C. Elliott P Compaq Computer Corp. Robert.Elliott at compaq.com
Mr. George Eisler P Conexant/Mindspeed geisler at aol.com
Mr. Robert Griswold P Crossroads Systems, Inc. rgriswold at crossroads.com
Mr. John Tyndall A Crossroads Systems, Inc. jtyndall at crossroads.com
Mr. Titkwan Hui P Dallas Semiconductor tk.hui at dalsemi.com
Mr. Ronald Stockford A Dell Computer Corp. ron_stockford at dell.com
Mr. Ralph O. Weber P ENDL Texas roweber at acm.org
Mr. Douglas Wagner P FCI dwagner at fciconnect.com
Mr. Randy Haagens P Hewlett Packard Co. randy_haagens at hp.com
Mr. Michael Banther A# Hewlett Packard Co. michael_banther at hp.com
Mr. Martin Goldstein AV Hewlett Packard Co. martin_goldstein at hp.com
Mr. Werner Glinka AV Hitachi America werner.glinka at attglobal.
net
Mr. Zane Daggett P Hitachi Cable Manchester zdaggett at hcm.hitachi.com
Mr. Randy Wasylak A Hitachi Cable Manchester rwasylak at hcm.hitachi.com
Mr. George O. Penokie P IBM / Tivoli Systems gop at us.ibm.com
Mr. Cris Simpson P Intel Corp. cris.simpson at intel.com
Mr. Tim Bradshaw P Iomega Corp. bradshat at iomega.com
Mr. John Lohmeyer P LSI Logic Corp. lohmeyer at t10.org
Ms. Jie Fan P Madison Cable Corp. jie.fan at madisoncable.com
Mr. Mark Evans P Maxtor Corp. mark_evans at maxtor.com
Ms. Emily Hill P Microsoft Corp. emhill at microsoft.com
Mr. Jay Neer P Molex Inc. jneer at molex.com
Mr. James R. (Bob) P Network Appliance Inc. bob at netapp.com
Davis
Mr. Charles Monia P Nishan Systems Inc. cmonia at nishansystems.com
Mr. Edward A. Gardner P Ophidian Designs eag at ophidian.com
Dr. Terence J. Nelson P Panasonic Technologies, terry at tjnelson.com
Inc
Mr. William P. P Philips Electronics/CD bill.mcferrin at cdedge.com
McFerrin Edge
Mr. Milan J. Merhar A Pirus Networks milan at pirus.com
Mr. Paul Entzel P Quantum Corp. paul.entzel at quantum.com
Mr. Gerald Houlder P Seagate Technology gerry_houlder at seagate.com
Mr. Erich Oetting P Storage Technology Corp. erich_oetting at stortek.com
Mr. Vit Novak P Sun Microsystems, Inc. vit.novak at sun.com
Mr. Paul D. Aloisi P Texas Instruments Paul_Aloisi at ti.com
Mr. Tasuku Kasebayashi P Toshiba America Elec. task.kasebayashi at tais.
Comp. toshiba.com
Mr. Michael Wamsley A# TycoElectronics mjwalmsl at tycoelectronics.
com
Mr. Ron Mathews P UNISYS Corporation ronald.mathews at unisys.com
Mr. Roger Cummings P Veritas Software roger.cummings at veritas.
com
Mr. Kenneth Hirata P Vixel Corp. Ken.Hirata at Vixel.com
Mr. Tom Hanan P Western Digital tom.hanan at wdc.com
Corporation
44 People Present
Status Key: P - Principal
A,A# - Alternate
AV - Advisory Member
L - Liaison
V - Visitor
--
John Lohmeyer Email: lohmeyer at t10.org
LSI Logic Corp. Voice: +1-719-533-7560
4420 ArrowsWest Dr. Fax: +1-719-533-7183
Colo Spgs, CO 80907
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org
More information about the T10
mailing list