sas-r00b now available

Elliott, Robert (Server Storage) Elliott at hp.com
Tue Jun 18 07:07:49 PDT 2002


* From the T10 Reflector (t10 at t10.org), posted by:
* "Elliott, Robert (Server Storage)" <Elliott at hp.com>
*
Yes, that will be in the next rev of 02-198 (currently titled "SAS OOB
timing") (not quite finished for today's conference call - a topic for
next week's SAS WG meeting).

--
Rob Elliott, elliott at hp.com
Industry Standard Server Storage Advanced Technology
Hewlett-Packard



> -----Original Message-----
> From: Mike Jenkins [mailto:jenkins at lsil.com] 
> Sent: Monday, June 17, 2002 8:52 PM
> To: t10 at t10.org
> Subject: Re: sas-r00b now available
> 
> 
> * From the T10 Reflector (t10 at t10.org), posted by:
> * Mike Jenkins <jenkins at lsil.com>
> *
> Rob,
> 
> During the joint SAS protocol/phy session on 5-7 June (02-200r1), 
> there was discussion about replacing the D10.2 characters in 
> speed negotiation with more challenging data such as an alternate 
> ALIGN.  The danger was that a device could receive the D10.2, but 
> not be able to receive ALIGN, resulting in both ends having 
> "agreed" on different speeds at the end of the negotiation.
> 
> Can you tell me if this change is still being considered?
> 
> Regards,
> Mike Jenkins
> 
> "Elliott, Robert (Server Storage)" wrote:
> > 
> > * From the T10 Reflector (t10 at t10.org), posted by:
> > * "Elliott, Robert (Server Storage)" <Elliott at hp.com>
> > *
> > sas-r00b is now available at http:/www.t10.org/new.htm.
> > 
> > Change bars are still from sas-r00. Incorporates these changes (not 
> > yet approved by a T10 plenary):
> > * editorial and minor technical changes from emails and 
> from 6/6 SAS 
> > WG meeting
> > * 6/6 SAS WG - require rotating through all ALIGNs
> > * 6/6 SAS WG - SMP remove DEVICE NAME from REPORT GENERAL function
> > * 02-179r1 SAS SMP PHY MARGIN CONTROL function (Ron Roberts)
> > * 02-211r1 SAS address frame field checking (Rob Elliott)
> > * 02-212r1 SAS SSP RESPONSE IU format (Bill Galloway)
> > * 02-214r1 SAS SSP hash transport layer checking (Bill Galloway)
> > * 02-217r0 SAS OPEN_REJECT priorities (Jim Coomes)
> > * 02-218r0 SAS Remove far-end retimed loopback (Jim Coomes)
> > * 02-203r1 SAS request confirmation correlation across layers (John
> > Worden) - only partially incorporated
> > * 02-200r1 Minutes from SAS protocol WG meeting 5-7 June 2002
> > 
> > --
> > Rob Elliott, elliott at hp.com
> > Industry Standard Server Storage Advanced Technology Hewlett-Packard
> > 
> > *
> > * For T10 Reflector information, send a message with
> > * 'info t10' (no quotes) in the message body to majordomo at t10.org
> 
> -- 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  Mike Jenkins               Phone: 408.433.7901            _____     
>  LSI Logic Corp, ms/AH260     Fax: 408.954.4764        
> LSI|LOGIC| (R)   
>  1525 McCarthy Blvd.       mailto:Jenkins at LSIL.com        |     |     
>  Milpitas, CA  95035         http://www.lsilogic.com      |_____|    
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> *
> * For T10 Reflector information, send a message with
> * 'info t10' (no quotes) in the message body to majordomo at t10.org
> 
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org




More information about the T10 mailing list