Dual connector for VHDC

Brian Cockburn Brian.Cockburn at i-cubed.co.uk
Wed Jul 14 09:38:37 PDT 1999


* From the T10 Reflector (t10 at symbios.com), posted by:
* Brian Cockburn <Brian.Cockburn at i-cubed.co.uk>
*
Hi,

  We are looking to put a dual, right angle, PCB mounted, VHDC
connector on our new design.  However the only parts we can find (from
Honda) have the connectors very close together and opposite ways
around e.g.

     ________________
    |    ________    |
    | o /________\ o |
    |    ________    |
    | o \________/ o |
    |________________|

  This arrangement makes the PCB tracking between the two sockets,
which we want to be 'in' and 'out' on the same SCSI bus, very
difficult.  (The connector is probably intended for ultra low height
two bus applications like PCI cards.)

  What we're looking for is a single unit that has the two connectors
the same way around thus making the PCB tracking viable e.g.

     ________________
    |    ________    |
    | o \________/ o |
    |                |
    |                |
    |   _________    |
    | o \________/ o |
    |________________|

  Any suggestions gratefully received.

  Thanks in advance, Brian.

-- 

Storage Area Networks Limited,      Phone: +44 1223 566111
Rustat House, 62 Clifton Road,        Fax: +44 1223 566313
Cambridge, CB1 7EG.              mailto:B.Cockburn at san.com

*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at symbios.com





More information about the T10 mailing list