First Public Review on SCSI-3 Controller Commands (SCC)

Lohmeyer, John JLOHMEYE at
Mon Feb 20 11:04:00 PST 1995

+From John Lohmeyer (john.lohmeyer at
+To the SCSI Reflector (scsi at

I received the attached press release on the first public review of the 
SCSI-3 Controller Commands (SCC).  This command set is used for RAID 
controller applications.  If you are submitting a public review comment, 
please send it to Lynn Barra (address below) with a copy to me.  If you have 
technical questions, please contact George Penokie, the SCC Project Editor, 
at gop at

John Lohmeyer             E-Mail:  john.lohmeyer at
Symbios Logic, Inc.        Voice:  719-573-3362
1635 Aeroplaza Dr.           Fax:  719-573-3037
Colo Spgs, CO 80916     SCSI BBS:  719-574-0424 300--14400 baud

<<<<<< Attached TEXT file named "PR/95-014" follows >>>>>>
Accredited Standards Committee*
X3, Information Technology


Doc No.:        PR/95-014
Reply To:       Lynn Barra              lbarra at

X3 Announces the Public Comment Period of X3.276:199x, Information
Technology - SCSI-3 Controller Commands

Washington, D.C., February 17, 1995 -- Accredited Standards Committee
X3, Information Technology is announcing the public comment period of

The comment period is from March 17, 1995 through May 16, 1995.

This standard defines the command set extensions to facilitate operation
of SCSI-3 storage array devices.  The clause(s) of this standard pertaining
to the SCSI-3 storage array device class, implemented in conjunction with
the applicable clauses within any of the SCSI-3 command standards, shall
specify the standard command set available for SCSI-3 storage arrays.

The objectives of the SCSI-3 Controller Commands is to provide the:

 - Transfer commands unique to SCSI-3 Controller Command devices;
 - Control commands to manage the operation of an SCSI-3 Controller
  Command device;
 - Optical device mapping and pass-through support.

A call for patents and pertinent issues (copyrights, trademarks) is also
being issued.

Comments and correspondence should be submitted to: X3 Secretariat,
Attn.:  Lynn Barra, 1250 Eye Street NW, Suite 200, Washington, DC  20005.
Send a copy to: American National Standards Institute, Attn.: BSR Center,
11 West 42nd Street, New York, NY  10036.

Copies of this draft standard can be purchased from Global Engineering
Documents, Inc., 15 Inverness Way East, Englewood, CO  80112.
1(800)854-7179 or (303)792-2181.

#         #          #
X3 Secretariat, 1250 Eye Street NW, Suite 200, Washington DC  20005
Email: x3sec at     FAX:  (202)638-4922

More information about the T10 mailing list