1. Identification of Proposed Project 1.1 Title: SCSI-3 Command Set 1.2 Proposer This project is proposed by the X3T9 Technical Committee. For additional information, please contact John B. Lohmeyer, X3T9.2 Chairman, at NCR Corporation, 3718 N. Rock Rd., Wichita, KS 67226 (Phone: 316-636-8703 FAX: 316-636-8889) or Dal Allan, X3T9.2 Vice-Chairman at ENDL, 14426 Black Walnut Ct, Saratoga, CA 95070 (Phone: 408-867-6630 Fax: 408-867-2115). 1.3 Date Submitted: December 7, 1990 1.4 Project Type: Development 2. Justification of Proposed Standard or Technical Report 2.1 Needs SCSI (X3.131-1986) and SCSI-2 (X3.131-1990) have proven to be extremely successful standards for the attachment of a wide range of peripherals to computer systems. As the popularity of the interface has increased, its application area has grown outside the originally intended small systems to encompass larger systems. The SCSI command sets require enhancement to reflect advances in computer technology and associated fields. There are a number of new and different devices that are using the SCSI Parallel Interface and the SCSI Parallel Protocol that will require variations on the existing command set to provide the needed functionality. This project proposal is one of a family of proposed SCSI-3 projects. The benefit of this structure is that the command sets are independent of the physical interface. This will facilitate using the SCSI command sets on emerging interfaces such as Fiber Channel. Another benefit of this structure is that the component standards can proceed independently. This permits new command sets to be developed in a timely fashion as the market needs arise. The SCSI-3 Parallel Interface project extends the parallel copper physical interface. The SCSI-3 Parallel Protocol project extends the SCSI protocol to take advantage of the new capabilities in the SCSI-3 Parallel Interface. The SCSI-3 Fiber Channel Protocol project maps the SCSI-3 Command Set to the Fiber Channel Interface (755-D). 2.2 Recommended Scope of Standard or Technical Report The proposed SCSI-3 Command Set standard should maintain a high degree of compatibility with SCSI-2 while providing extensions and enhancements to support new features and new devices. Candidates for inclusion in the SCSI-3 Command Set are: a) Support more than 8 directly addressable devices. b) Clarification and maintenance of the SCSI standard that may result from further results of implementation of SCSI-2. c) Define other capabilities which fit within the general application scope of enhancing the SCSI-3 Command Set, and other capabilities that may be proposed during the development phase by the participants in the project. It is not intended that the standard developed by this proposed project would address areas below the command sets such as the protocol or physical interface. It is intended that the standard would be used in conjunction with the other applicable SCSI-3 standards. 2.3 Existing Practice in Area of Proposed Standard or Technical Report The proposed project principally involves enhancing the SCSI-2 command set and structuring it into a separate document. It will be based upon sections 7 through 17 of the SCSI-2 standard (X3.131-1990). 2.4 Expected Stability of Proposed Standard or Technical Report with Respect to Current and Potential Technological Advance The nature of the proposed project is to insure that SCSI has an upward, highly-compatible growth path. This will insure users who have current investments in SCSI are provided with the ability to handle new features and devices used in systems employing SCSI. 3. Description of Proposed Project 3.1 Type of Document (Standard or Technical Report): Standard 3.2 Definition of Concepts and Special Terms (if any): none 3.3 Expected Relationship with Approved X3 Reference Models (e.g., DBMS, OSI) The SCSI-3 Command Set is for use in closed systems. 3.4 Recommended Program of Work The following program of work is planned for the SCSI-3 Command Set standard: o Solicit continuing participation by the present SCSI-2 participants through X3T9.2 procedures and new participants through press releases. Invite comments by end-user organizations and invite proposals from SCSI development organizations and other organizations that may have a contribution to a viable SCSI-3 Command Set standard. o Establish requirements for SCSI functional additions along with downward compatibility requirements. o Prepare a draft standard based on appropriate sections of SCSI-2, proposals submitted, and other information gathered during the initial investigation. o Consider the results of SCSI-3 Command Set testing as may be available to the committee through the voluntary efforts of the various participants in X3T9 and its assigned task group. o Submit the draft proposed standard to X3 for further processing. 3.5 Resources - Individuals and Organizations Competent in Subject Matter The current membership of X3T9.2 includes representatives from all parts of the computer industry from semiconductor chip manufacturers to large mainframe system manufacturers as well as Government agencies. The members of X3T9.2 have expressed their desire to participate and cooperate in the development of this proposed standard. There are sufficient resources to complete the development of this standard without delaying work on other standards. 3.6 Recommended X3 Development Technical Committees (Existing or New) It is recommended that the development work be done in task group X3T9.2 which was responsible for developing the SCSI-1 and SCSI-2 standards. 3.7 Anticipated Frequency and Duration of Meetings Task group X3T9.2 meets for two days bi-monthly. Specific task ad hoc groups are called as may be required for one to three days between the regular meetings but their results are not binding. 3.8 Target Date for dpANS to X3 (Milestone 10): April 1993 3.9 Estimated Useful Life of Standard or Technical Report It is anticipated that this standard will have a life of over 10 years. 4. Implementation Impacts 4.1 Impact on Existing User Practices and Investments The proposed SCSI-3 Command Set standard will provide an upward growth path complementary to the existing practices and investments. It is likely that any isolated negative impacts would occur in any case through non-standard evolution or revolution. 4.2 Impact on Supplier Products and Support The proposed SCSI-3 Command Set standard will provide an upward growth path complementary to the existing practices and investments. It is likely that any isolated negative impacts would occur in any case through non-standard evolution or revolution. 4.3 Techniques and Costs for Compliance Verification The committee will consider the results of SCSI-3 Command Set testing as may be available to the committee through the voluntary efforts of the various participants in X3T9 and its assigned task group. With this method all costs are borne by the organizations of the various participants and have for the most part been mainly an adjunct of their normal development costs. 4.4 Legal Considerations No new legal considerations are expected that are not already attendant with SCSI and in accordance with accepted X3 patent policies. 5. Closely Related Standards Activities 5.1 Existing Standards X3.131-1986 Small Computer System Interface (SCSI) X3.131-1990 Small Computer System Interface (SCSI-2) 5.2 X3 Standards Development Projects A project (685-D) has been approved to develop a single SCSI-3 standard which would include all of the work proposed for the SCSI-3 Parallel Interface, the SCSI-3 Command Set, and the SCSI-3 Command Set. As X3T9.2 began working on this project it became apparent that SCSI-3 would benefit from restructuring the draft standard into three draft standards. The benefits include: a) The individual standards could proceed at their own pace as interface technology advances. b) The SCSI-3 Command Set would become independent of the physical interface which would facilitate using this command set on other physical interfaces such as Fiber Channel. c) The single-document approach used in SCSI-1 and SCSI-2 has become unwieldy. SCSI-1 was 212 pages and SCSI-2 grew to nearly 600 pages. A single-document SCSI-3 standard would likely be much larger. Such large documents are difficult to edit, review, or comprehend. Consequently, this revised project proposal for 685-D and three additional project proposals have been prepared. This revised SCSI-3 project proposal would only include the SCSI-3 Command Set. Two additional project proposals have been prepared to include the SCSI-3 Parallel Protocol and the SCSI-3 Parallel Interface, previously included in 685-D. The third new project proposal, SCSI-3 Fiber Channel Protocol, would define how to map the SCSI-3 Command Set onto the Fiber Channel Interface (755-D). Pictorially, the relationship of these projects is as follows: +---------------+ | SCSI-3 | | Command | | Set | +---------------+ | | +--------+ +--------+ | | +----------------+ +---------------+ | SCSI-3 | | SCSI-3 | | Parallel | | Fiber Channel | | Protocol | | Protocol | +----------------+ +---------------+ | | +----------------+ +---------------+ | SCSI-3 | | Fiber | | Parallel | | Channel | | Interface | | Interface | +----------------+ +---------------+ 5.3 X3/SPARC Study Groups: none 5.4 Other Related Domestic Standards Efforts: none 5.5 ISO Standards Development Projects IS 9316 (SCSI-1) has been published. DP 10288 (SCSI-2) is in development in ISO JTC1/SC25 WG4. 5.6 Other Related International Standards Development Projects ECMA SCSI (ECMA-111:1985). This is partly equivalent to ANSI SCSI-1 (X3.131- 1986). There are no current development activities within ECMA on SCSI. 5.7 Recommendations for Coordinating Liaison: none 5.8 Recommendations for Close Liaison: none