Multiple Commands in UAS

Mark Overby MOverby at
Mon Aug 10 17:14:31 PDT 2009

Formatted message: <a href="">HTML-formatted message</a>

I misread the original question and thought he was asking about command
On 8/10/09 5:11 PM, "Curtis Stevens" <curtis.stevens at> wrote:
Mark, both the Sense IU and the Read Ready IU are returned from the device on
the same pipe.	You have to complete the sending of the Sense IU and wait for
USB-2 to give you an IN request on the status pipe before you can send the
Read Ready IU.
Curtis E. Stevens
Sr. Staff  Engr - Standards & Features Technology
20511 Lake Forest Drive #A 113-F
Lake Forest, California 92630
Phone: 949-672-7933
Cell: 949-307-5050
E-Mail: Curtis.Stevens at 
From: Mark Overby [mailto:MOverby at]
Sent: Monday, August 10, 2009 5:09 PM
To: Madhukar; Curtis Stevens
Cc: t10 at
Subject: Re: Multiple Commands in UAS
I disagree with your assertion. The method of reception of the SENSE IU is
independent of how you transmit the COMMAND IU on a separate pipe.
On 8/10/09 9:46 AM, "Madhukar" <madhukar.gubba at> wrote:
* From the T10 Reflector (t10 at, posted by:
* Madhukar <madhukar.gubba at>
On Mon, Aug 10, 2009 at 9:27 PM, Curtis Stevens<curtis.stevens at>
> You need to wait for the USB ACK on the status pipe before sending the Read
> Ready IU.  In USB-2, you will only be able to send the Read Ready IU in
> response to a request for the IU from the initiator port.
Thank You for the reply.
So, it means two requests cannot be processed at same point of time
|from two different threads on same pipe. The second request can only
be started when there is an ACK for the first request. The second
request need to wait for the completion of first one and start it at
later point of time.
Is this different in case of USB-3?
Thank You.
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at
This email message is for the sole use of the intended recipient(s) and may
contain confidential information.  Any unauthorized review, use, disclosure
or distribution is prohibited.	If you are not the intended recipient, please
contact the sender by reply email and destroy all copies of the original

More information about the T10 mailing list