SMC-3 Action Item Reminder
Kevin D Butt
kdbutt at us.ibm.com
Thu Jan 3 16:48:18 PST 2008
Formatted message: <A HREF="r080103i_f.htm">HTML-formatted message</A>
All SMC-3 Action Item holders. Here is a reminder of action items
generated during the November SMC-3 Working Group.
06-020 [Robert Payne] Define a philosophy for Write Exclusive Persistent
Reservations in SMC.
06-044 [Roger Cummings] Solicit additional vendor-specific sense codes
|from library vendors per June discussion item 4.4.
06-063 [Noud Snelder] Investigate use of LOGICAL UNIT NOT READY,
INITIALIZING COMMAND REQUIRED error code.
07-003 [Curtis Ballard] Create a proposal to define the usage of the
?Cleaning Requested? and ?Cleaning Failure? error codes.
07-006 [Rod Wideman] Define a new ASC/ASCQ for ?Logical Unit Not Ready ?
Robotics Disabled?.
07-017 [Group] Make sure the all the functionality of Read Element Status
is covered by the Report Element Information command (06-272) and the
Report Volume Information command and examine if an informative annex to
map the RES command onto these is appropriate. [Reminder to do as final
step]
07-027 [Rod Wideman] Revise and post SMC-3 New Additional Sense Codes
Usage (07-018r0) as 07-018r1.
07-042 [Paul Entzel] Write a proposal for the commands which the cached
ready state in ADC may be used.
07-058 [Kevin Butt] Revise SMC-3: Medium Magazine Error Codes (07-372r0)
and post.
07-059 [Noud Snelder] Noud Snelder Revise SMC-3 Additional sense code for
incompatible destination element (07-222r1) and post.
05Nov07-01 [Kevin Butt]: Determine what actions set TapeAlert flag
19h (illegal operation) and when the flag is cleared. Also what actions
does it generate?
05Nov07-02 [Curtis Ballard]: Determine what actions set TapeAlert
flag 19h (illegal operation) and when the flag is cleared. Also what
actions does it generate?
05Nov07-03 [Erich Oetting]: Determine what actions set TapeAlert flag
19h (illegal operation) and when the flag is cleared. Also what actions
does it generate?
05Nov07-04 [Rod Wideman]: Determine what actions set TapeAlert flag
19h (illegal operation) and when the flag is cleared. Also what actions
does it generate?
05Nov07-05 [Halvard Eriksen]: Determine what actions set TapeAlert
flag 19h (illegal operation) and when the flag is cleared. Also what
actions does it generate?
05Nov07-06 [Noud Snelder]: Determine what actions set TapeAlert flag
19h (illegal operation) and when the flag is cleared. Also what actions
does it generate?
05Nov07-07 [Nould Snelder] to incorporate SMC-3 Additional sense code
for incompatible destination element (07-222r1) as revised.
05Nov07-08 [Group] review SMC-3 for changing SPC-3 references to
SPC-4.
05Nov07-09 [Noud Snelder] to revise and post SMC-3, READ ATTRIBUTE
and WRITE ATTRIBUTE command clarification (07-244r2).
05Nov07-10 [Noud Snelder] to incorporate SMC-3, READ ATTRIBUTE and
WRITE ATTRIBUTE command clarification (07-244r2) as revised into SMC-3.
Kevin D. Butt
SCSI & Fibre Channel Architect, Tape Firmware
MS 6TYA, 9000 S. Rita Rd., Tucson, AZ 85744
Tel: 520-799-2869 / 520-799-5280
Fax: 520-799-2723 (T/L:321)
Email address: kdbutt at us.ibm.com
More information about the T10
mailing list