[T11.3] FC-DA-2: table 35 - ACC Response code = "Command executed"
dpeterso at brocade.com
Thu Apr 10 08:32:18 PDT 2008
Formatted message: <A HREF="r0804104_f.htm">HTML-formatted message</A>
I disagree with stating the obvious. The row is misleading and again
provides no value.
FCP already states: An accept response code indicating other than
REQUEST EXECUTED (see 6.3.5 and FC-LS) shall be provided if the PRLI ELS
FCP Service Parameter page is incorrect or if a requested image pair is
From: Bob.Nixon at Emulex.Com [mailto:Bob.Nixon at Emulex.Com]
Sent: Wednesday, April 09, 2008 5:11 PM
To: David Peterson; t11_3 at t11.org; t10 at t10.org
Subject: RE: [T11.3] FC-DA-2: table 35 - ACC Response code = "Command
Hi, Dave, I think what that row is trying to say is that a Target has to
be able to give that response (if it couldn't, it could not be a
Target). Other responses are not sepcifically prohibited by that line,
although it could be read that way. I would suggest adding another row:
ACC Response code != "Command executed": - A P -
From: t11_3-bounces at listserve.com [mailto:t11_3-bounces at listserve.com]
On Behalf Of David Peterson
Sent: Wednesday, April 09, 2008 11:49 AM
To: t11_3 at t11.org; t10 at t10.org
Subject: [T11.3] FC-DA-2: table 35 - ACC Response code = "Command
FC-DA-2 table 35 has a row specifying an ACC Response code = "Command
executed" is a Required PRLI response from an FCP target.
Other responses are certainly possible (see FCP-4) thus I believe this
is wrong (and actually mislabeled) and provides no real value either.
I propose that the row be removed.
More information about the T10