[t13] Fwd: why not H = C = D ModeSense6 for just the header

James.C.Hatfield at seagate.com James.C.Hatfield at seagate.com
Tue Feb 11 15:31:49 PST 2003


This message is from the T13 list server.



Most ATAPI tape drives understand the 6-byte CDB.
Some support the 10-byte format, as well.

ATAPI CD-ROM  drives support 6- and 10-byte forms.

The act of supporting the 10-byte CDB implies to <some> drivers that the
device
is a CD-ROM type of device.... leading to the driver getting confused.

Halve Phun !!!
-----------------------------------------------------------------
Jim Hatfield
ATA Interface Firmware & T13 (ATA/ATAPI) Standards Representative
Seagate Technology - PSG
   e-mail:  James.C.Hatfield at seagate.com
   s-mail:  389 Disc Drive;  Longmont, CO 80501 USA
   voice:   720-684-2120
   fax    :    720-684-2711
====================================================


                                                                                                                                                     
                    "Eschmann, Michael                                                                                                               
                    K"                          To:     <t10 at t10.org>, <forum at t13.org>                                                               
                    <michael.k.eschmann@        cc:                                                                                                  
                    intel.com>                  Subject:     RE: [t13] Fwd: why not H = C = D ModeSense6 for just the header                         
                    Sent by:                                                                                                                         
                    owner-forum at t13.org                                                                                                              
                    No Phone Info                                                                                                                    
                    Available                                                                                                                        
                                                                                                                                                     
                    02/11/2003 04:19 PM                                                                                                              
                                                                                                                                                     
                                                                                                                                                     




This message is from the T13 list server.


FYI, this is an issue with the Microsoft driver (supplied with their
Windows 2000 OS) is not converting the SCSI 6-byte CDB to the 10-byte CDB
format.  ATAPI drives don't understand the 6-byte format of "Mode Sense"
(am I wrong?), so I believe this issue that MS reported has nothing to do
with odd "byte" issues that you've been, er, peddling.  MKE.



-----Original Message-----
From: Pat LaVarre [mailto:LAVARRE at iomega.com]
Sent: Monday, February 10, 2003 8:22 AM
To: t10 at t10.org; forum at t13.org
Subject: [t13] Fwd: why not H = C = D ModeSense6 for just the header


This message is from the T13 list server.


Newsgroups: microsoft.public.vc
Date: 2003-02-07 13:39:51 PST
...
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q813908
SCSI Pass-Through Mode Sense Command May Crash the Computer
...
If a SCSI Mode Sense command (operation code 0x1A) is
sent by using SCSI pass-through to an ATAPI CD-ROM
device, you may receive a "Stop" error message on a
blue screen and the computer may then stop responding
or may restart.  This may occur if the value of the
Data Length field in the Mode Sense command is less
than 8.  Note that this problem occurs only with the
6-byte Mode Sense command (operation code 0x1A), not
with the 10-byte Mode Sense command (operation code
0x5A).
...






More information about the T10 mailing list