ssc2 SPACE CODE's above 7 defined where

David Peterson (dap) dap at cisco.com
Tue Nov 5 07:25:31 PST 2002


* From the T10 Reflector (t10 at t10.org), posted by:
* "David Peterson \(dap\)" <dap at cisco.com>
*
The CODE field has been expanded and the reserved values should be
0110b-1111b.

Thanks...dap

-----Original Message-----
From: owner-t10 at t10.org [mailto:owner-t10 at t10.org] On Behalf Of Pat
LaVarre
Sent: Sunday, November 03, 2002 4:01 PM
To: t10 at t10.org
Subject: ssc2 SPACE CODE's above 7 defined where


* From the T10 Reflector (t10 at t10.org), posted by:
* "Pat LaVarre" <LAVARRE at iomega.com>
*
Back in the days of ssc-r22, op x11 was named SPACE
and its CODE field was cdb[1] & x07.  SSC2 redefines
op x11 to be SPACE(6) with a CODE field grown to
include cdb[1] & x0F.

But the "Table 24 - Code definition" has not grown
accordingly?  In ssc2r08e.pdf, we see only
"0110b-0111b" "Reserved".  We see no mention of
"1000b-1111b".

Is this merely an tupographical oversight, or is this
omission meaningful?

Curiously yours in awesome ignorance, Pat LaVarre

P.S. I see the text of "7.10 SPACE(16) command" also points back to that
table of "6.6 SPACE(6) command" to define precisely half of all the
values of its cdb[1] & xF CODE field.

*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org

*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo at t10.org




More information about the T10 mailing list