persistent reservation question.

Ulrich, David dulrich at lsil.com
Mon Jun 24 12:36:04 PDT 2002


* From the T10 Reflector (t10 at t10.org), posted by:
* "Ulrich, David" <dulrich at lsil.com>
*
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01C21BB6.610DD710
Content-Type: text/plain;
	charset="iso-8859-1"

The following text is found on page number 134 of SPC-3 rev. 7 

The TRANSPORTID PARAMETER DATA LENGTH field specifies the number of
bytes of TransportIDs that follow. 
The command shall be terminated with a CHECK CONDITION status and the
sense key set to ILLEGAL 
REQUEST: 

a) If the value in the parameter list length field in the CDB does not
include all of the additional parameter list 
bytes specified by the TRANSPORTID PARAMETER DATA LENGTH field; or 
b) If the value in the TRANSPORTID PARAMETER DATA LENGTH field results
in the truncation of a TransportID. 

The format of a TransportID is specified in 8.5.4. 

Should an additional sense code be specified as well? 

Best regards, 

David Ulrich 
LSI Logic Storage Systems Division 


------_=_NextPart_001_01C21BB6.610DD710
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">

 persistent reservation question. The following text is found on page = number 134 of SPC-3 rev. 7 The TRANSPORTID PARAMETER = DATA LENGTH field specifies the number of bytes of TransportIDs = that follow. 
The command = shall be terminated with a CHECK CONDITION status and the sense key set = to ILLEGAL 
REQUEST: a) If the value = in the parameter list length field in the CDB does not include all of = the additional parameter list 
bytes specified = by the TRANSPORTID PARAMETER DATA LENGTH field; or 
b) If the value = in the TRANSPORTID PARAMETER DATA LENGTH field results in the = truncation of a TransportID. The format of a = TransportID is specified in 8.5.4. Should an additional sense code be = specified as well? Best regards, David Ulrich 
LSI Logic Storage Systems = Division 
------_=_NextPart_001_01C21BB6.610DD710--




More information about the T10 mailing list