SCSI ASC/ASCQ Assignments

Alphabetic Sorted Listing

as of 1/14/17

Use the following letters to position in the list
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z  i


       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
20/0B  DZTPROMAEBK    ACCESS DENIED - ACL LUN CONFLICT
20/08  DZTPROMAEBK    ACCESS DENIED - ENROLLMENT CONFLICT
20/01  DZTPROMAEBK    ACCESS DENIED - INITIATOR PENDING-ENROLLED
20/09  DZTPROMAEBK    ACCESS DENIED - INVALID LU IDENTIFIER
20/03  DZTPROMAEBK    ACCESS DENIED - INVALID MGMT ID KEY
20/0A  DZTPROMAEBK    ACCESS DENIED - INVALID PROXY TOKEN
20/02  DZTPROMAEBK    ACCESS DENIED - NO ACCESS RIGHTS
4B/03  DZTPROMAEBK    ACK/NAK TIMEOUT
67/02         A       ADD LOGICAL UNIT FAILED
13/00  DZ   O   BK    ADDRESS MARK NOT FOUND FOR DATA FIELD
12/00  DZ   O   BK    ADDRESS MARK NOT FOUND FOR ID FIELD
26/13  D              APPLICATION TAG MODE PAGE IS INVALID
67/08         A       ASSIGN FAILURE OCCURRED
27/03    T R          ASSOCIATED WRITE PROTECT
2A/06  DZTPROMAEBKVF  ASYMMETRIC ACCESS STATE CHANGED
47/04  DZTPROMAEBKVF  ASYNCHRONOUS INFORMATION PROTECTION ERROR DETECTED
44/71  DZT      B     ATA DEVICE FAILED SET FEATURES
67/0B  DZT      B     ATA DEVICE FEATURE NOT ENABLED
00/1D  DZT      B     ATA PASS THROUGH INFORMATION AVAILABLE
00/21  DZ             ATOMIC COMMAND ABORTED DUE TO ACA
67/06         A       ATTACHMENT OF LOGICAL UNIT FAILED
21/06  DZ             ATTEMPT TO READ INVALID DATA
00/11      R          AUDIO PLAY OPERATION IN PROGRESS
00/12      R          AUDIO PLAY OPERATION PAUSED
00/14      R          AUDIO PLAY OPERATION STOPPED DUE TO ERROR
00/13      R          AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED
74/40  DZT R MAEBKV   AUTHENTICATION FAILED
66/00                 AUTOMATIC DOCUMENT FEEDER COVER UP
66/01                 AUTOMATIC DOCUMENT FEEDER LIFT UP
55/06  DZT ROM  B     AUXILIARY MEMORY OUT OF SPACE
11/12  DZT ROM  B     AUXILIARY MEMORY READ ERROR
0C/0B  DZT ROM  B     AUXILIARY MEMORY WRITE ERROR
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
00/04    T            BEGINNING-OF-PARTITION/MEDIUM DETECTED
3F/18  D              BIND COMPLETED
3F/19  D              BIND REDIRECTED
0C/06  DZT  O   B     BLOCK NOT COMPRESSIBLE
14/04    T            BLOCK SEQUENCE ERROR
29/03  DZTPROMAEBKVF  BUS DEVICE RESET FUNCTION OCCURRED
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
11/0E  DZT RO   B     CANNOT DECOMPRESS USING DECLARED ALGORITHM
30/06  DZT RO   B     CANNOT FORMAT MEDIUM - INCOMPATIBLE MEDIUM
30/02  DZT RO   BK    CANNOT READ MEDIUM - INCOMPATIBLE FORMAT
30/01  DZT RO   BK    CANNOT READ MEDIUM - UNKNOWN FORMAT
30/08      R          CANNOT WRITE - APPLICATION CODE MISMATCH
30/05  DZT RO   BK    CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
30/04  DZT RO   BK    CANNOT WRITE MEDIUM - UNKNOWN FORMAT
2A/09  DZ             CAPACITY DATA HAS CHANGED
52/00    T            CARTRIDGE FAULT
73/00      R          CD CONTROL ERROR
24/01  DZTPRO AEBKVF  CDB DECRYPTION ERROR
3F/02  DZTPROM  BK    CHANGED OPERATING DEFINITION
11/06      RO   B     CIRC UNRECOVERED ERROR
30/03  DZT R M   K    CLEANING CARTRIDGE INSTALLED
30/07  DZT ROMAEBKVF  CLEANING FAILURE
30/0A  DZT RO AEBK    CLEANING REQUEST REJECTED
00/17  DZT ROMAEBKVF  CLEANING REQUESTED
30/13        M        CLEANING VOLUME EXPIRED
4A/00  DZTPROMAEBKVF  COMMAND PHASE ERROR
67/0C  D              COMMAND REJECTED
2C/00  DZTPROMAEBKVF  COMMAND SEQUENCE ERROR
2E/01  DZ   OM  B     COMMAND TIMEOUT BEFORE PROCESSING
2E/02  DZ   OM  B     COMMAND TIMEOUT DURING PROCESSING
2E/03  DZ   OM  B     COMMAND TIMEOUT DURING PROCESSING DUE TO ERROR RECOVERY
6E/00         A       COMMAND TO LOGICAL UNIT FAILED
2F/00  DZTPROMAEBKVF  COMMANDS CLEARED BY ANOTHER INITIATOR
2F/02  DZTPROMAEBKVF  COMMANDS CLEARED BY DEVICE SERVER
2F/01  DZ             COMMANDS CLEARED BY POWER LOSS NOTIFICATION
3F/04  DZT ROMAEBK    COMPONENT DEVICE ATTACHED
0C/04  DZT  O   B     COMPRESSION CHECK MISCOMPARE ERROR
27/06      R       F  CONDITIONAL WRITE PROTECT
67/00         A       CONFIGURATION FAILURE
67/01         A       CONFIGURATION OF INCAPABLE LOGICAL UNITS FAILED
6F/07      R          CONFLICT IN BINDING NONCE RECORDING
00/1E  DZT R MAEBKV   CONFLICTING SA CREATION REQUEST
4B/07  DZTPROMAEBK F  CONNECTION LOST
5D/25  DZ       B     CONTROLLER IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D/27  DZ       B     CONTROLLER IMPENDING FAILURE CHANNEL PARAMETRICS
5D/28  DZ       B     CONTROLLER IMPENDING FAILURE CONTROLLER DETECTED
5D/22  DZ       B     CONTROLLER IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D/2C  DZ       B     CONTROLLER IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D/21  DZ       B     CONTROLLER IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D/20  DZ       B     CONTROLLER IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D/23  DZ       B     CONTROLLER IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D/2A  DZ       B     CONTROLLER IMPENDING FAILURE SEEK TIME PERFORMANCE
5D/2B  DZ       B     CONTROLLER IMPENDING FAILURE SPIN-UP RETRY COUNT
5D/26  DZ       B     CONTROLLER IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D/29  DZ       B     CONTROLLER IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D/24  DZ       B     CONTROLLER IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
2B/00  DZTPRO    K    COPY CANNOT EXECUTE SINCE HOST CANNOT DISCONNECT
6F/00      R          COPY PROTECTION KEY EXCHANGE FAILURE - AUTHENTICATION FAILURE
6F/02      R          COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED
6F/01      R          COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT PRESENT
26/0D  DZTPRO    K    COPY SEGMENT GRANULARITY VIOLATION
26/15    T            COPY SOURCE OR COPY DESTINATION NOT AUTHORIZED
0D/05  DZTPRO A  K    COPY TARGET DEVICE DATA OVERRUN
0D/04  DZTPRO A  K    COPY TARGET DEVICE DATA UNDERRUN
0D/02  DZTPRO A  K    COPY TARGET DEVICE NOT REACHABLE
67/07         A       CREATION OF LOGICAL UNIT FAILED
74/04    T            CRYPTOGRAPHIC INTEGRITY VALIDATION FAILED
73/10      R          CURRENT POWER CALIBRATION AREA ALMOST FULL
73/11      R          CURRENT POWER CALIBRATION AREA IS FULL
2C/04      R          CURRENT PROGRAM AREA IS EMPTY
2C/03      R          CURRENT PROGRAM AREA IS NOT EMPTY
30/09      R          CURRENT SESSION NOT FIXATED FOR APPEND
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
5D/35  DZ       B     DATA CHANNEL IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D/37  DZ       B     DATA CHANNEL IMPENDING FAILURE CHANNEL PARAMETRICS
5D/38  DZ       B     DATA CHANNEL IMPENDING FAILURE CONTROLLER DETECTED
5D/32  DZ       B     DATA CHANNEL IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D/3C  DZ       B     DATA CHANNEL IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D/31  DZ       B     DATA CHANNEL IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D/30  DZ       B     DATA CHANNEL IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D/33  DZ       B     DATA CHANNEL IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D/3A  DZ       B     DATA CHANNEL IMPENDING FAILURE SEEK TIME PERFORMANCE
5D/3B  DZ       B     DATA CHANNEL IMPENDING FAILURE SPIN-UP RETRY COUNT
5D/36  DZ       B     DATA CHANNEL IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D/39  DZ       B     DATA CHANNEL IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D/34  DZ       B     DATA CHANNEL IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
55/0A        M        DATA CURRENTLY UNAVAILABLE
26/05  DZTPRO A BK    DATA DECRYPTION ERROR
26/10    T            DATA DECRYPTION KEY FAIL LIMIT REACHED
2A/0D    T            DATA ENCRYPTION CAPABILITIES CHANGED
74/21    T            DATA ENCRYPTION CONFIGURATION PREVENTED
2A/13    T            DATA ENCRYPTION KEY INSTANCE COUNTER HAS CHANGED
2A/11    T            DATA ENCRYPTION PARAMETERS CHANGED BY ANOTHER I_T NEXUS
2A/12    T            DATA ENCRYPTION PARAMETERS CHANGED BY VENDOR SPECIFIC EVENT
0C/05  DZT  O   B     DATA EXPANSION OCCURRED DURING COMPRESSION
69/00         A       DATA LOSS ON LOGICAL UNIT
4B/05  DZTPROMAEBK    DATA OFFSET ERROR
41/00  DZ             DATA PATH FAILURE (SHOULD USE 40 NN)
47/01  DZTPROMAEBKVF  DATA PHASE CRC ERROR DETECTED
4B/00  DZTPROMAEBKVF  DATA PHASE ERROR
11/07       O   B     DATA RE-SYNCHRONIZATION ERROR
16/03  DZ   O   BK    DATA SYNC ERROR - DATA AUTO-REALLOCATED
16/01  DZ   O   BK    DATA SYNC ERROR - DATA REWRITTEN
16/04  DZ   O   BK    DATA SYNC ERROR - RECOMMEND REASSIGNMENT
16/02  DZ   O   BK    DATA SYNC ERROR - RECOMMEND REWRITE
16/00  DZ   O   BK    DATA SYNCHRONIZATION MARK ERROR
53/0C        M        DATA TRANSFER DEVICE ERROR - EJECT FAILED
53/0D        M        DATA TRANSFER DEVICE ERROR - LIBRARY COMMUNICATION FAILED
53/09        M        DATA TRANSFER DEVICE ERROR - LOAD FAILED
53/0A        M        DATA TRANSFER DEVICE ERROR - UNLOAD FAILED
53/0B        M        DATA TRANSFER DEVICE ERROR - UNLOAD MISSING
3B/1B        M        DATA TRANSFER DEVICE INSERTED
3B/1A        M        DATA TRANSFER DEVICE REMOVED
4B/0A  DZTPROMAEBK F  DATA-IN BUFFER ERROR
4B/09  DZTPROMAEBK F  DATA-IN BUFFER OVERFLOW - DATA BUFFER DESCRIPTOR AREA
4B/08  DZTPROMAEBK F  DATA-IN BUFFER OVERFLOW - DATA BUFFER SIZE
4B/0D  DZTPROMAEBK F  DATA-OUT BUFFER ERROR
4B/0C  DZTPROMAEBK F  DATA-OUT BUFFER OVERFLOW - DATA BUFFER DESCRIPTOR AREA
4B/0B  DZTPROMAEBK F  DATA-OUT BUFFER OVERFLOW - DATA BUFFER SIZE
11/0D  DZT RO   B     DE-COMPRESSION CRC ERROR
71/00    T            DECOMPRESSION EXCEPTION LONG ALGORITHM ID
70/NN    T            DECOMPRESSION EXCEPTION SHORT ALGORITHM ID OF NN
19/00  DZ   O    K    DEFECT LIST ERROR
19/03  DZ   O    K    DEFECT LIST ERROR IN GROWN LIST
19/02  DZ   O    K    DEFECT LIST ERROR IN PRIMARY LIST
19/01  DZ   O    K    DEFECT LIST NOT AVAILABLE
1C/00  DZ   O   BK    DEFECT LIST NOT FOUND
32/01  DZ   O   BK    DEFECT LIST UPDATE FAILURE
0C/0F      R          DEFECTS IN ERROR WINDOW
2C/11  D              DESCRIPTOR FORMAT SENSE DATA REQUIRED
3F/05  DZT ROMAEBK    DEVICE IDENTIFIER CHANGED
29/04  DZTPROMAEBKVF  DEVICE INTERNAL RESET
40/NN  DZTPROMAEBKVF  DIAGNOSTIC FAILURE ON COMPONENT NN (80h-FFh)
74/08  DZT R M E  VF  DIGITAL SIGNATURE VALIDATION FAILURE
66/02                 DOCUMENT JAM IN AUTOMATIC DOCUMENT FEEDER
66/03                 DOCUMENT MISS FEED AUTOMATIC IN DOCUMENT FEEDER
6F/05      R          DRIVE REGION MUST BE PERMANENT/REGION RESET COUNT ERROR
6F/0A      R          DRIVE-HOST PAIRING SUSPENDED
53/07        M        DUPLICATE VOLUME IDENTIFIER
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
3F/0F  DZTPROMAEBKVF  ECHO BUFFER OVERWRITTEN
3B/18        M        ELEMENT DISABLED
3B/19        M        ELEMENT ENABLED
53/08        M        ELEMENT STATUS UNKNOWN
72/04      R          EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
34/00  DZTPROMAEBKVF  ENCLOSURE FAILURE
35/05  DZT ROMAEBKVF  ENCLOSURE SERVICES CHECKSUM ERROR
35/00  DZTPROMAEBKVF  ENCLOSURE SERVICES FAILURE
35/03  DZTPROMAEBKVF  ENCLOSURE SERVICES TRANSFER FAILURE
35/04  DZTPROMAEBKVF  ENCLOSURE SERVICES TRANSFER REFUSED
35/02  DZTPROMAEBKVF  ENCLOSURE SERVICES UNAVAILABLE
74/0A    T            ENCRYPTED BLOCK NOT RAW READ ENABLED
74/0D    T            ENCRYPTION ALGORITHM DISABLED
74/09    T            ENCRYPTION MODE MISMATCH ON READ
74/07    T            ENCRYPTION PARAMETERS NOT USEABLE
3B/0F      R          END OF MEDIUM REACHED
63/00      R          END OF USER AREA ENCOUNTERED ON THIS TRACK
00/05    T            END-OF-DATA DETECTED
14/03    T            END-OF-DATA NOT FOUND
00/02    T            END-OF-PARTITION/MEDIUM DETECTED
51/00  DZT RO         ERASE FAILURE
51/01  DZ  R          ERASE FAILURE - INCOMPLETE ERASE OPERATION DETECTED
00/18    T            ERASE OPERATION IN PROGRESS
74/05    T            ERROR DECRYPTING DATA
0D/00  DZTPRO A  K    ERROR DETECTED BY THIRD PARTY TEMPORARY INITIATOR
2A/0A  DZT            ERROR HISTORY I_T NEXUS CLEARED
2A/0B  DZT            ERROR HISTORY SNAPSHOT RELEASED
0A/00  DZTPROMAEBKVF  ERROR LOG OVERFLOW
11/10      R          ERROR READING ISRC NUMBER
11/0F      R          ERROR READING UPC/EAN NUMBER
2A/0C              F  ERROR RECOVERY ATTRIBUTES HAVE CHANGED
11/02  DZT RO   BK    ERROR TOO LONG TO CORRECT
38/06           B     ESN - DEVICE BUSY CLASS EVENT
38/04           B     ESN - MEDIA CLASS EVENT
38/02           B     ESN - POWER MANAGEMENT CLASS EVENT
38/00           B     EVENT STATUS NOTIFICATION
03/02    T            EXCESSIVE WRITE ERRORS
67/04         A       EXCHANGE OF LOGICAL UNIT FAILED
67/0D  D              EXPLICIT BIND NOT ALLOWED
00/20  DZTP     B     EXTENDED COPY INFORMATION AVAILABLE
74/6F    T            EXTERNAL DATA ENCRYPTION CONTROL ERROR
74/6E    T            EXTERNAL DATA ENCRYPTION CONTROL TIMEOUT
74/61             V   EXTERNAL DATA ENCRYPTION KEY MANAGER ACCESS ERROR
74/62             V   EXTERNAL DATA ENCRYPTION KEY MANAGER ERROR
74/63             V   EXTERNAL DATA ENCRYPTION KEY NOT FOUND
74/64             V   EXTERNAL DATA ENCRYPTION REQUEST NOT AUTHORIZED
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
3B/07                 FAILED TO SENSE BOTTOM-OF-FORM
3B/06                 FAILED TO SENSE TOP-OF-FORM
5D/00  DZTPROMAEBKVF  FAILURE PREDICTION THRESHOLD EXCEEDED
5D/FF  DZTPROMAEBKVF  FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
00/01    T            FILEMARK DETECTED
14/02    T            FILEMARK OR SETMARK NOT FOUND
5D/65  DZ       B     FIRMWARE IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D/67  DZ       B     FIRMWARE IMPENDING FAILURE CHANNEL PARAMETRICS
5D/68  DZ       B     FIRMWARE IMPENDING FAILURE CONTROLLER DETECTED
5D/62  DZ       B     FIRMWARE IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D/6C  DZ       B     FIRMWARE IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D/61  DZ       B     FIRMWARE IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D/60  DZ       B     FIRMWARE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D/63  DZ       B     FIRMWARE IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D/6A  DZ       B     FIRMWARE IMPENDING FAILURE SEEK TIME PERFORMANCE
5D/6B  DZ       B     FIRMWARE IMPENDING FAILURE SPIN-UP RETRY COUNT
5D/66  DZ       B     FIRMWARE IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D/69  DZ       B     FIRMWARE IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D/64  DZ       B     FIRMWARE IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
09/02      RO    K    FOCUS SERVO FAILURE
31/01  DZ  RO   B     FORMAT COMMAND FAILED
28/02      R          FORMAT-LAYER MAY HAVE CHANGED
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
58/00       O         GENERATION DOES NOT EXIST
1C/02  DZ   O   BK    GROWN DEFECT LIST NOT FOUND
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
5D/15  DZ       B     HARDWARE IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D/17  DZ       B     HARDWARE IMPENDING FAILURE CHANNEL PARAMETRICS
5D/18  DZ       B     HARDWARE IMPENDING FAILURE CONTROLLER DETECTED
5D/12  DZ       B     HARDWARE IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D/1C  DZ       B     HARDWARE IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D/11  DZ       B     HARDWARE IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D/10  DZ       B     HARDWARE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D/1D  DZ       B     HARDWARE IMPENDING FAILURE POWER LOSS PROTECTION CIRCUIT
5D/13  DZ       B     HARDWARE IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D/1A  DZ       B     HARDWARE IMPENDING FAILURE SEEK TIME PERFORMANCE
5D/1B  DZ       B     HARDWARE IMPENDING FAILURE SPIN-UP RETRY COUNT
5D/16  DZ       B     HARDWARE IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D/19  DZ       B     HARDWARE IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D/14  DZ       B     HARDWARE IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
27/01  DZT RO   BK    HARDWARE WRITE PROTECTED
09/04  DZT RO   B     HEAD SELECT FAULT
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
00/06  DZTPROMAEBKVF  I/O PROCESS TERMINATED
10/00  DZ   O   BK    ID CRC OR ECC ERROR
5E/03  DZTPRO A  K    IDLE CONDITION ACTIVATED BY COMMAND
5E/01  DZTPRO A  K    IDLE CONDITION ACTIVATED BY TIMER
5E/06  DZTPRO A  K    IDLE_B CONDITION ACTIVATED BY COMMAND
5E/05  DZTPRO A  K    IDLE_B CONDITION ACTIVATED BY TIMER
5E/08  DZTPRO A  K    IDLE_C CONDITION ACTIVATED BY COMMAND
5E/07  DZTPRO A  K    IDLE_C CONDITION ACTIVATED BY TIMER
20/0C    T            ILLEGAL COMMAND WHEN NOT IN APPEND-ONLY MODE
20/06    T            ILLEGAL COMMAND WHILE IN EXPLICIT ADDRESS MODE
20/07    T            ILLEGAL COMMAND WHILE IN IMPLICIT ADDRESS MODE
20/04    T            ILLEGAL COMMAND WHILE IN WRITE CAPABLE STATE
22/00  DZ             ILLEGAL FUNCTION (USE 20 00, 24 00, OR 26 00)
64/00      R          ILLEGAL MODE FOR THIS TRACK
2C/05           B     ILLEGAL POWER CONDITION REQUEST
2A/07  DZTPROMAEBKVF  IMPLICIT ASYMMETRIC ACCESS STATE TRANSITION FAILED
28/01  DZT ROM  B     IMPORT OR EXPORT ELEMENT ACCESSED
28/03        M        IMPORT/EXPORT ELEMENT ACCESSED, MEDIUM CHANGED
30/00  DZT ROM  BK    INCOMPATIBLE MEDIUM INSTALLED
30/12        M        INCOMPATIBLE VOLUME QUALIFIER
30/11        M        INCOMPATIBLE VOLUME TYPE
11/08    T            INCOMPLETE BLOCK READ
26/11    T            INCOMPLETE KEY-ASSOCIATED DATA SET
0C/10  DZ             INCOMPLETE MULTIPLE ATOMIC WRITE OPERATIONS
0D/03  DZTPRO A  K    INCORRECT COPY TARGET DEVICE TYPE
74/03    T            INCORRECT DATA ENCRYPTION KEY
74/0B    T            INCORRECT ENCRYPTION PARAMETERS
0E/02  DZTPROMAEBK F  INFORMATION UNIT TOO LONG
0E/01  DZTPROMAEBK F  INFORMATION UNIT TOO SHORT
47/03  DZTPROMAEBKVF  INFORMATION UNIT iuCRC ERROR DETECTED
6A/00         A       INFORMATIONAL, REFER TO LOG
48/00  DZTPROMAEBKVF  INITIATOR DETECTED ERROR MESSAGE RECEIVED
4B/06  DZTPROMAEBK    INITIATOR RESPONSE TIMEOUT
26/0B  DZTPRO    K    INLINE DATA LENGTH EXCEEDED
3F/03  DZTPROMAEBKVF  INQUIRY DATA HAS CHANGED
3F/15  DZTPR MAEBK    INSPECT REFERRALS SENSE DESCRIPTORS
55/05  DZTPROMAEBK    INSUFFICIENT ACCESS CONTROL RESOURCES
6F/06      R          INSUFFICIENT BLOCK COUNT FOR BINDING NONCE RECORDING
6F/08      R          INSUFFICIENT PERMISSION
55/0B  DZTPROMAEBKVF  INSUFFICIENT POWER FOR OPERATION
55/04  DZTPROMAE K    INSUFFICIENT REGISTRATION RESOURCES
55/02  DZTPROMAE K    INSUFFICIENT RESERVATION RESOURCES
55/03  DZTPROMAE K    INSUFFICIENT RESOURCES
55/11  D              INSUFFICIENT RESOURCES TO BIND
55/0C  DZTP     B     INSUFFICIENT RESOURCES TO CREATE ROD
55/0D  DZTP     B     INSUFFICIENT RESOURCES TO CREATE ROD TOKEN
2E/00  DZ  ROM  B     INSUFFICIENT TIME FOR OPERATION
55/0E  DZ             INSUFFICIENT ZONE RESOURCES
55/0F  DZ             INSUFFICIENT ZONE RESOURCES TO COMPLETE WRITE
44/00  DZTPROMAEBKVF  INTERNAL TARGET FAILURE
21/02      R          INVALID ADDRESS FOR WRITE
3D/00  DZTPROMAE K    INVALID BITS IN IDENTIFY MESSAGE
2C/02                 INVALID COMBINATION OF WINDOWS SPECIFIED
20/00  DZTPROMAEBKVF  INVALID COMMAND OPERATION CODE
26/0F              F  INVALID DATA-OUT BUFFER INTEGRITY CHECK VALUE
6F/09      R          INVALID DRIVE-HOST PAIRING SERVER
21/01  DZT ROM  BK    INVALID ELEMENT ADDRESS
24/09  DZ             INVALID FAST FORMAT
24/00  DZTPROMAEBKVF  INVALID FIELD IN CDB
0E/03  DZTPR MAEBK F  INVALID FIELD IN COMMAND INFORMATION UNIT
26/00  DZTPROMAEBKVF  INVALID FIELD IN PARAMETER LIST
0E/00  DZTPROMAEBK F  INVALID INFORMATION UNIT
49/00  DZTPROMAEBKVF  INVALID MESSAGE ERROR
26/0C  DZTPRO    K    INVALID OPERATION FOR COPY SOURCE OR DESTINATION
64/01      R          INVALID PACKET SIZE
26/0E  DZTPROMAEBK    INVALID PARAMETER WHILE PORT IS ENABLED
26/04  DZTPROMAEBKVF  INVALID RELEASE OF PERSISTENT RESERVATION
74/12  DZT R MAEBKV   INVALID SA USAGE
4B/01  DZTPROMAEBK    INVALID TARGET PORT TRANSFER TAG RECEIVED
23/00  DZTP     B     INVALID TOKEN OPERATION, CAUSE NOT REPORTABLE
23/0A  DZTP     B     INVALID TOKEN OPERATION, INVALID TOKEN LENGTH
23/03  DZTP     B     INVALID TOKEN OPERATION, REMOTE ROD TOKEN CREATION NOT SUPPORTED
23/02  DZTP     B     INVALID TOKEN OPERATION, REMOTE TOKEN USAGE NOT SUPPORTED
23/08  DZTP     B     INVALID TOKEN OPERATION, TOKEN CANCELLED
23/05  DZTP     B     INVALID TOKEN OPERATION, TOKEN CORRUPT
23/09  DZTP     B     INVALID TOKEN OPERATION, TOKEN DELETED
23/07  DZTP     B     INVALID TOKEN OPERATION, TOKEN EXPIRED
23/06  DZTP     B     INVALID TOKEN OPERATION, TOKEN REVOKED
23/04  DZTP     B     INVALID TOKEN OPERATION, TOKEN UNKNOWN
23/01  DZTP     B     INVALID TOKEN OPERATION, UNSUPPORTED TOKEN TYPE
21/03      R          INVALID WRITE CROSSING LAYER JUMP
24/08  DZT R MAEBKV   INVALID XCDB
29/07  DZTPROMAEBKVF  I_T NEXUS LOSS OCCURRED
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
11/05      RO   B     L-EC UNCORRECTABLE ERROR
60/00                 LAMP FAILURE
14/07    T            LOCATE OPERATION FAILURE
00/19    T            LOCATE OPERATION IN PROGRESS
5B/02  DZTPROM   K    LOG COUNTER AT MAXIMUM
5B/00  DZTPROM   K    LOG EXCEPTION
5B/03  DZTPROM   K    LOG LIST CODES EXHAUSTED
2A/02  DZT ROMAE K    LOG PARAMETERS CHANGED
21/00  DZT RO   BK    LOGICAL BLOCK ADDRESS OUT OF RANGE
10/02  DZT  O         LOGICAL BLOCK APPLICATION TAG CHECK FAILED
10/01  DZT  O         LOGICAL BLOCK GUARD CHECK FAILED
10/04    T            LOGICAL BLOCK PROTECTION ERROR ON RECOVER BUFFERED DATA
10/05    T            LOGICAL BLOCK PROTECTION METHOD ERROR
10/03  DZT  O         LOGICAL BLOCK REFERENCE TAG CHECK FAILED
74/71  DZT R M E  V   LOGICAL UNIT ACCESS NOT AUTHORIZED
08/03  DZT ROM  BK    LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)
08/00  DZT ROMAEBKVF  LOGICAL UNIT COMMUNICATION FAILURE
08/02  DZT ROMAEBKVF  LOGICAL UNIT COMMUNICATION PARITY ERROR
08/01  DZT ROMAEBKVF  LOGICAL UNIT COMMUNICATION TIME-OUT
05/00  DZT ROMAEBKVF  LOGICAL UNIT DOES NOT RESPOND TO SELECTION
4C/00  DZTPROMAEBKVF  LOGICAL UNIT FAILED SELF-CONFIGURATION
3E/03  DZTPROMAEBKVF  LOGICAL UNIT FAILED SELF-TEST
3E/01  DZTPROMAEBKVF  LOGICAL UNIT FAILURE
5D/02      R          LOGICAL UNIT FAILURE PREDICTION THRESHOLD EXCEEDED
3E/00  DZTPROMAEBKVF  LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
04/01  DZTPROMAEBKVF  LOGICAL UNIT IS IN PROCESS OF BECOMING READY
04/0A  DZTPROMAEBKVF  LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION
04/0B  DZTPROMAEBKVF  LOGICAL UNIT NOT ACCESSIBLE, TARGET PORT IN STANDBY STATE
04/0C  DZTPROMAEBKVF  LOGICAL UNIT NOT ACCESSIBLE, TARGET PORT IN UNAVAILABLE STATE
68/00         A       LOGICAL UNIT NOT CONFIGURED
04/18        M        LOGICAL UNIT NOT READY, A DOOR IS OPEN
04/1C  DZT   MAEB     LOGICAL UNIT NOT READY, ADDITIONAL POWER USE NOT YET GRANTED
04/23  DZ             LOGICAL UNIT NOT READY, AFFILIATION REQUIRED
04/10  DZT ROM  B     LOGICAL UNIT NOT READY, AUXILIARY MEMORY NOT ACCESSIBLE
04/17        M        LOGICAL UNIT NOT READY, CALIBRATION REQUIRED
04/00  DZTPROMAEBKVF  LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
04/1D  DZ             LOGICAL UNIT NOT READY, CONFIGURATION IN PROGRESS
04/16        M        LOGICAL UNIT NOT READY, CONFIGURATION REQUIRED
04/04  DZT RO   B     LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
04/21  DZTPROMAEBKVF  LOGICAL UNIT NOT READY, HARD RESET REQUIRED
04/02  DZTPROMAEBKVF  LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED
04/20  DZTPROMAEBKVF  LOGICAL UNIT NOT READY, LOGICAL UNIT RESET REQUIRED
04/08      R          LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS
04/03  DZTPROMAEBKVF  LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
04/1E  DZ             LOGICAL UNIT NOT READY, MICROCODE ACTIVATION REQUIRED
04/1F  DZTPROMAEBKVF  LOGICAL UNIT NOT READY, MICROCODE DOWNLOAD REQUIRED
04/11  DZT RO AEB VF  LOGICAL UNIT NOT READY, NOTIFY (ENABLE SPINUP) REQUIRED
04/12        M    V   LOGICAL UNIT NOT READY, OFFLINE
04/19        M        LOGICAL UNIT NOT READY, OPERATING IN SEQUENTIAL MODE
04/07  DZTPROMAEBKVF  LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
04/22  DZTPROMAEBKVF  LOGICAL UNIT NOT READY, POWER CYCLE REQUIRED
04/05  DZT  O A BK F  LOGICAL UNIT NOT READY, REBUILD IN PROGRESS
04/06  DZT  O A BK    LOGICAL UNIT NOT READY, RECALCULATION IN PROGRESS
04/15        M        LOGICAL UNIT NOT READY, ROBOTICS DISABLED
04/13  DZT R MAEBKV   LOGICAL UNIT NOT READY, SA CREATION IN PROGRESS
04/1B  DZ       B     LOGICAL UNIT NOT READY, SANITIZE IN PROGRESS
04/0E  DZT R MAEBKVF  LOGICAL UNIT NOT READY, SECURITY SESSION IN PROGRESS
04/09  DZTPROMAEBKVF  LOGICAL UNIT NOT READY, SELF-TEST IN PROGRESS
04/14  DZ       B     LOGICAL UNIT NOT READY, SPACE ALLOCATION IN PROGRESS
04/1A  DZ       B     LOGICAL UNIT NOT READY, START STOP UNIT COMMAND IN PROGRESS
04/0D              F  LOGICAL UNIT NOT READY, STRUCTURE CHECK REQUIRED
25/00  DZTPROMAEBKVF  LOGICAL UNIT NOT SUPPORTED
27/02  DZT RO   BK    LOGICAL UNIT SOFTWARE WRITE PROTECTED
00/1F  DZT      B     LOGICAL UNIT TRANSITIONING TO ANOTHER POWER CONDITION
3E/04  DZTPROMAEBKVF  LOGICAL UNIT UNABLE TO UPDATE SELF-TEST LOG
5E/00  DZTPRO A  K    LOW POWER CONDITION ON
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
55/10  DZ             MAXIMUM NUMBER OF STREAMS OPEN
55/08    T            MAXIMUM NUMBER OF SUPPLEMENTAL DECRYPTION KEYS EXCEEDED
15/01  DZT ROM  BK    MECHANICAL POSITIONING ERROR
3B/16      R          MECHANICAL POSITIONING OR CHANGER ERROR
5D/01      R    B     MEDIA FAILURE PREDICTION THRESHOLD EXCEEDED
5D/73  DZ       B     MEDIA IMPENDING FAILURE ENDURANCE LIMIT MET
53/00  DZT ROM  BK    MEDIA LOAD OR EJECT FAILED
6F/04      R          MEDIA REGION CODE IS MISMATCHED TO LOGICAL UNIT REGION
3F/11  DZT ROM  B     MEDIUM AUXILIARY MEMORY ACCESSIBLE
55/09        M        MEDIUM AUXILIARY MEMORY NOT ACCESSIBLE
3B/0D  DZT ROM  BK    MEDIUM DESTINATION ELEMENT FULL
31/00  DZT RO   BK    MEDIUM FORMAT CORRUPTED
3F/10  DZT ROM  B     MEDIUM LOADABLE
3B/13  DZT ROM  BK    MEDIUM MAGAZINE INSERTED
3B/14  DZT ROM  BK    MEDIUM MAGAZINE LOCKED
3B/11  DZT ROM  BK    MEDIUM MAGAZINE NOT ACCESSIBLE
3B/12  DZT ROM  BK    MEDIUM MAGAZINE REMOVED
3B/15  DZT ROM  BK    MEDIUM MAGAZINE UNLOCKED
30/10      R          MEDIUM NOT FORMATTED
3A/00  DZT ROM  BK    MEDIUM NOT PRESENT
3A/03  DZT ROM  B     MEDIUM NOT PRESENT - LOADABLE
3A/04  DZT RO   B     MEDIUM NOT PRESENT - MEDIUM AUXILIARY MEMORY ACCESSIBLE
3A/01  DZT ROM  BK    MEDIUM NOT PRESENT - TRAY CLOSED
3A/02  DZT ROM  BK    MEDIUM NOT PRESENT - TRAY OPEN
53/02  DZT ROM  BK    MEDIUM REMOVAL PREVENTED
53/03        M        MEDIUM REMOVAL PREVENTED BY DATA TRANSFER ELEMENT
2A/15    T   M    V   MEDIUM REMOVAL PREVENTION PREEMPTED
3B/0E  DZT ROM  BK    MEDIUM SOURCE ELEMENT EMPTY
53/04    T            MEDIUM THREAD OR UNTHREAD FAILURE
43/00  DZTPROMAEBKVF  MESSAGE ERROR
3F/01  DZTPROMAEBKVF  MICROCODE HAS BEEN CHANGED
3F/16  DZTPROMAEBKVF  MICROCODE HAS BEEN CHANGED WITHOUT RESET
21/08  DZ             MISALIGNED WRITE COMMAND
1D/00  DZT RO   BK    MISCOMPARE DURING VERIFY OPERATION
1D/01  DZ       B     MISCOMPARE VERIFY OF UNMAPPED LBA
11/0A  DZT  O   BK    MISCORRECTED ERROR
2A/01  DZT ROMAEBKVF  MODE PARAMETERS CHANGED
67/03         A       MODIFICATION OF LOGICAL UNIT FAILED
69/01         A       MULTIPLE LOGICAL UNIT FAILURES
07/00  DZT ROM  BK    MULTIPLE PERIPHERAL DEVICES SELECTED
11/03  DZT  O   BK    MULTIPLE READ ERRORS
0C/0E  DZT  O   BK    MULTIPLE WRITE ERRORS
67/09         A       MULTIPLY ASSIGNED LOGICAL UNIT
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
4B/04  DZTPROMAEBK    NAK RECEIVED
00/00  DZTPROMAEBKVF  NO ADDITIONAL SENSE INFORMATION
00/15      R          NO CURRENT AUDIO STATUS TO RETURN
32/00  DZ   O   BK    NO DEFECT SPARE LOCATION AVAILABLE
11/09    T            NO GAP FOUND
01/00  DZ   O   BK    NO INDEX/SECTOR SIGNAL
72/07      R          NO MORE TEST ZONE EXTENSIONS ARE ALLOWED
72/05      R          NO MORE TRACK RESERVATIONS ALLOWED
06/00  DZ  ROM  BK    NO REFERENCE POSITION FOUND
02/00  DZ  RO   BK    NO SEEK COMPLETE
03/01    T            NO WRITE CURRENT
24/06              F  NONCE NOT UNIQUE
24/07              F  NONCE TIMESTAMP OUT OF RANGE
20/0F  D              NOT A CONGLOMERATE LOGICAL UNIT
20/0E  D              NOT A SUBSIDIARY LOGICAL UNIT
20/0D  D              NOT AN ADMINISTRATIVE LOGICAL UNIT
28/00  DZTPROMAEBKVF  NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
2C/0B    T            NOT RESERVED
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
00/16  DZTPROMAEBKVF  OPERATION IN PROGRESS
5A/01  DZT ROM  BK    OPERATOR MEDIUM REMOVAL REQUEST
5A/00  DZTPRO   BK    OPERATOR REQUEST OR STATE CHANGE INPUT
5A/03  DZT RO A BK    OPERATOR SELECTED WRITE PERMIT
5A/02  DZT RO A BK    OPERATOR SELECTED WRITE PROTECT
2C/0C  DZ             ORWRITE GENERATION DOES NOT MATCH
61/02                 OUT OF FOCUS
4E/00  DZTPROMAEBKVF  OVERLAPPED COMMANDS ATTEMPTED
2D/00    T            OVERWRITE ERROR ON UPDATE IN PLACE
20/05    T            Obsolete
24/02    T            Obsolete
24/03    T            Obsolete
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
63/01      R          PACKET DOES NOT FIT IN AVAILABLE SPACE
3B/05                 PAPER JAM
1A/00  DZTPROMAEBKVF  PARAMETER LIST LENGTH ERROR
26/01  DZTPROMAEBKVF  PARAMETER NOT SUPPORTED
26/02  DZTPROMAEBKVF  PARAMETER VALUE INVALID
2A/00  DZT ROMAEBKVF  PARAMETERS CHANGED
69/02         A       PARITY/DATA MISMATCH
1F/00  DZ   O    K    PARTIAL DEFECT LIST TRANSFER
2C/0A              F  PARTITION OR COLLECTION CONTAINS USER OBJECTS
4B/14  DZTPROMAEBK F  PCIE ACS VIOLATION
4B/10  DZTPROMAEBK F  PCIE COMPLETER ABORT
4B/0F  DZTPROMAEBK F  PCIE COMPLETION TIMEOUT
4B/12  DZTPROMAEBK F  PCIE ECRC CHECK FAILED
4B/0E  DZTPROMAEBK F  PCIE FABRIC ERROR
4B/11  DZTPROMAEBK F  PCIE POISONED TLP RECEIVED
4B/15  DZTPROMAEBK F  PCIE TLP PREFIX BLOCKED
4B/13  DZTPROMAEBK F  PCIE UNSUPPORTED REQUEST
03/00  DZT  O   BK    PERIPHERAL DEVICE WRITE FAULT
27/05    T R          PERMANENT WRITE PROTECT
2C/06      R          PERSISTENT PREVENT CONFLICT
44/01  DZTP  MAEBKVF  PERSISTENT RESERVATION INFORMATION LOST
27/04    T R          PERSISTENT WRITE PROTECT
47/06  DZT   MAEBKVF  PHY TEST FUNCTION IN PROGRESS
50/02    T            POSITION ERROR RELATED TO TIMING
3B/0C    T            POSITION PAST BEGINNING OF MEDIUM
3B/0B                 POSITION PAST END OF MEDIUM
15/02  DZT RO   BK    POSITIONING ERROR DETECTED BY READ OF MEDIUM
73/01      R          POWER CALIBRATION AREA ALMOST FULL
73/03      R          POWER CALIBRATION AREA ERROR
73/02      R          POWER CALIBRATION AREA IS FULL
29/01  DZTPROMAEBKVF  POWER ON OCCURRED
29/00  DZTPROMAEBKVF  POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
5E/41           B     POWER STATE CHANGE TO ACTIVE
5E/47           BK    POWER STATE CHANGE TO DEVICE CONTROL
5E/42           B     POWER STATE CHANGE TO IDLE
5E/45           B     POWER STATE CHANGE TO SLEEP
5E/43           B     POWER STATE CHANGE TO STANDBY
42/00  DZ             POWER-ON OR SELF-TEST FAILURE (SHOULD USE 40 NN)
2C/07  DZTPROMAEBKVF  PREVIOUS BUSY STATUS
2C/09  DZTPROM EBKVF  PREVIOUS RESERVATION CONFLICT STATUS
2C/08  DZTPROMAEBKVF  PREVIOUS TASK SET FULL STATUS
1C/01  DZ   O   BK    PRIMARY DEFECT LIST NOT FOUND
2A/08  DZT ROMAEBKVF  PRIORITY CHANGED
73/05      R          PROGRAM MEMORY AREA IS FULL
73/04      R          PROGRAM MEMORY AREA UPDATE FAILURE
00/07    T            PROGRAMMABLE EARLY WARNING DETECTED
47/05  DZTPROMAEBKVF  PROTOCOL SERVICE CRC ERROR
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
55/07              F  QUOTA ERROR
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
40/00  DZ             RAM FAILURE (SHOULD USE 40 NN)
15/00  DZT ROM  BK    RANDOM POSITIONING ERROR
73/17      R          RDZ IS FULL
21/07  DZ             READ BOUNDARY VIOLATION
11/13  DZTPRO AEBKVF  READ ERROR - FAILED RETRANSMISSION REQUEST
11/14  DZ             READ ERROR - LBA MARKED BAD BY APPLICATION CLIENT
11/11      R          READ ERROR - LOSS OF STREAMING
6F/03      R          READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION
3B/0A                 READ PAST BEGINNING OF MEDIUM
3B/09                 READ PAST END OF MEDIUM
3B/17              F  READ PAST END OF USER OBJECT
11/01  DZT RO   BK    READ RETRIES EXHAUSTED
6C/00         A       REBUILD FAILURE OCCURRED
6D/00         A       RECALCULATE FAILURE OCCURRED
14/01  DZT RO   BK    RECORD NOT FOUND
14/06  DZT  O   BK    RECORD NOT FOUND - DATA AUTO-REALLOCATED
14/05  DZT  O   BK    RECORD NOT FOUND - RECOMMEND REASSIGNMENT
14/00  DZT RO   BK    RECORDED ENTITY NOT FOUND
18/02  DZ  RO   BK    RECOVERED DATA - DATA AUTO-REALLOCATED
18/05  DZ  RO   BK    RECOVERED DATA - RECOMMEND REASSIGNMENT
18/06  DZ  RO   BK    RECOVERED DATA - RECOMMEND REWRITE
17/05  DZ  RO   BK    RECOVERED DATA USING PREVIOUS SECTOR ID
18/03      R          RECOVERED DATA WITH CIRC
18/07  DZ   O   BK    RECOVERED DATA WITH ECC - DATA REWRITTEN
18/01  DZ  RO   BK    RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED
18/00  DZT RO   BK    RECOVERED DATA WITH ERROR CORRECTION APPLIED
18/04      R          RECOVERED DATA WITH L-EC
18/08      R          RECOVERED DATA WITH LINKING
17/03  DZT RO   BK    RECOVERED DATA WITH NEGATIVE HEAD OFFSET
17/00  DZT RO   BK    RECOVERED DATA WITH NO ERROR CORRECTION APPLIED
17/02  DZT RO   BK    RECOVERED DATA WITH POSITIVE HEAD OFFSET
17/01  DZT RO   BK    RECOVERED DATA WITH RETRIES
17/04      RO   B     RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED
17/06  DZ   O   BK    RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED
17/09  DZ  RO   BK    RECOVERED DATA WITHOUT ECC - DATA REWRITTEN
17/07  DZ  RO   BK    RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT
17/08  DZ  RO   BK    RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE
1E/00  DZ   O   BK    RECOVERED ID WITH ECC CORRECTION
3F/06  DZT ROMAEB     REDUNDANCY GROUP CREATED OR MODIFIED
3F/07  DZT ROMAEB     REDUNDANCY GROUP DELETED
6B/01         A       REDUNDANCY LEVEL GOT BETTER
6B/02         A       REDUNDANCY LEVEL GOT WORSE
2A/05  DZTPROMAE      REGISTRATIONS PREEMPTED
67/05         A       REMOVE OF LOGICAL UNIT FAILED
3F/0E  DZTPROMAE      REPORTED LUNS DATA HAS CHANGED
3B/08    T            REPOSITION ERROR
2A/03  DZTPROMAE K    RESERVATIONS PREEMPTED
2A/04  DZTPROMAE      RESERVATIONS RELEASED
2C/0D  DZ             RESET WRITE POINTER NOT ALLOWED
00/1A    T            REWIND OPERATION IN PROGRESS
36/00                 RIBBON, INK, OR TONER FAILURE
73/06      R          RMA/PMA IS ALMOST FULL
72/06      R          RMZ EXTENSION IS NOT ALLOWED
37/00  DZT ROMAEBKVF  ROUNDED PARAMETER
5C/00  DZ   O         RPL STATUS CHANGE
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
2A/14  DZT R MAEBKV   SA CREATION CAPABILITIES DATA HAS CHANGED
74/30  DZT R MAEBKV   SA CREATION PARAMETER NOT SUPPORTED
74/10  DZT R MAEBKV   SA CREATION PARAMETER VALUE INVALID
74/11  DZT R MAEBKV   SA CREATION PARAMETER VALUE REJECTED
31/03  DZ       B     SANITIZE COMMAND FAILED
39/00  DZT ROMAE K    SAVING PARAMETERS NOT SUPPORTED
62/00                 SCAN HEAD POSITIONING ERROR
29/02  DZTPROMAEBKVF  SCSI BUS RESET OCCURRED
47/00  DZTPROMAEBKVF  SCSI PARITY ERROR
47/02  DZTPROMAEBKVF  SCSI PARITY ERROR DETECTED DURING ST DATA PHASE
54/00     P           SCSI TO HOST SYSTEM INTERFACE FAILURE
24/04              F  SECURITY AUDIT VALUE FROZEN
74/79  DZ             SECURITY CONFLICT IN TRANSLATED DEVICE
74/00    T            SECURITY ERROR
24/05              F  SECURITY WORKING KEY FROZEN
45/00  DZTPROMAEBKVF  SELECT OR RESELECT FAILURE
3B/00    T            SEQUENTIAL POSITIONING ERROR
5D/45  DZ       B     SERVO IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D/47  DZ       B     SERVO IMPENDING FAILURE CHANNEL PARAMETRICS
5D/48  DZ       B     SERVO IMPENDING FAILURE CONTROLLER DETECTED
5D/42  DZ       B     SERVO IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D/4C  DZ       B     SERVO IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D/41  DZ       B     SERVO IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D/40  DZ       B     SERVO IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D/43  DZ       B     SERVO IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D/4A  DZ       B     SERVO IMPENDING FAILURE SEEK TIME PERFORMANCE
5D/4B  DZ       B     SERVO IMPENDING FAILURE SPIN-UP RETRY COUNT
5D/46  DZ       B     SERVO IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D/49  DZ       B     SERVO IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D/44  DZ       B     SERVO IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
72/00      R          SESSION FIXATION ERROR
72/03      R          SESSION FIXATION ERROR - INCOMPLETE TRACK IN SESSION
72/01      R          SESSION FIXATION ERROR WRITING LEAD-IN
72/02      R          SESSION FIXATION ERROR WRITING LEAD-OUT
00/1B    T            SET CAPACITY OPERATION IN PROGRESS
67/0A  DZTPROMAEBKVF  SET TARGET PORT GROUPS COMMAND FAILED
00/03    T            SETMARK DETECTED
3B/04                 SLEW FAILURE
47/7F  DZTPROMAEBK    SOME COMMANDS CLEARED BY ISCSI PROTOCOL EVENT
2F/03  DZTPROMAEBKVF  SOME COMMANDS CLEARED BY QUEUING LAYER EVENT
27/07  DZ       B     SPACE ALLOCATION FAILED WRITE PROTECT
5D/03      R          SPARE AREA EXHAUSTION PREDICTION THRESHOLD EXCEEDED
3F/08  DZT ROMAEB     SPARE CREATED OR MODIFIED
3F/09  DZT ROMAEB     SPARE DELETED
5D/55  DZ       B     SPINDLE IMPENDING FAILURE ACCESS TIMES TOO HIGH
5D/57  DZ       B     SPINDLE IMPENDING FAILURE CHANNEL PARAMETRICS
5D/58  DZ       B     SPINDLE IMPENDING FAILURE CONTROLLER DETECTED
5D/52  DZ       B     SPINDLE IMPENDING FAILURE DATA ERROR RATE TOO HIGH
5D/5C  DZ       B     SPINDLE IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT
5D/51  DZ       B     SPINDLE IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH
5D/50  DZ       B     SPINDLE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
5D/53  DZ       B     SPINDLE IMPENDING FAILURE SEEK ERROR RATE TOO HIGH
5D/5A  DZ       B     SPINDLE IMPENDING FAILURE SEEK TIME PERFORMANCE
5D/5B  DZ       B     SPINDLE IMPENDING FAILURE SPIN-UP RETRY COUNT
5D/56  DZ       B     SPINDLE IMPENDING FAILURE START UNIT TIMES TOO HIGH
5D/59  DZ       B     SPINDLE IMPENDING FAILURE THROUGHPUT PERFORMANCE
5D/54  DZ       B     SPINDLE IMPENDING FAILURE TOO MANY BLOCK REASSIGNS
09/03      RO         SPINDLE SERVO FAILURE
5C/02  DZ   O         SPINDLES NOT SYNCHRONIZED
5C/01  DZ   O         SPINDLES SYNCHRONIZED
5E/04  DZTPRO A  K    STANDBY CONDITION ACTIVATED BY COMMAND
5E/02  DZTPRO A  K    STANDBY CONDITION ACTIVATED BY TIMER
5E/0A  DZTPRO A  K    STANDBY_Y CONDITION ACTIVATED BY COMMAND
5E/09  DZTPRO A  K    STANDBY_Y CONDITION ACTIVATED BY TIMER
6B/00         A       STATE CHANGE HAS OCCURRED
2C/0F  DZ             STREAM NOT OPEN
3F/1A  D              SUBSIDIARY BINDING CHANGED
68/01  DZ             SUBSIDIARY LOGICAL UNIT NOT CONFIGURED
1B/00  DZTPROMAEBKVF  SYNCHRONOUS DATA TRANSFER ERROR
55/01  DZ   O   BK    SYSTEM BUFFER FULL
55/00     P           SYSTEM RESOURCE FAILURE
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
4D/NN  DZTPROMAEBKVF  TAGGED OVERLAPPED COMMANDS (NN = TASK TAG)
33/00    T            TAPE LENGTH ERROR
3B/03                 TAPE OR ELECTRONIC VERTICAL FORMS UNIT NOT READY
3B/01    T            TAPE POSITION ERROR AT BEGINNING-OF-MEDIUM
3B/02    T            TAPE POSITION ERROR AT END-OF-MEDIUM
26/14    T            TAPE STREAM MIRRORING PREVENTED
3F/00  DZTPROMAEBKVF  TARGET OPERATING CONDITIONS HAVE CHANGED
38/07  DZ             THIN PROVISIONING SOFT THRESHOLD REACHED
0D/01  DZTPRO A  K    THIRD PARTY DEVICE FAILURE
5B/01  DZTPROM   K    THRESHOLD CONDITION MET
26/03  DZTPROMAE K    THRESHOLD PARAMETERS NOT SUPPORTED
3E/02  DZTPROMAEBKVF  TIMEOUT ON LOGICAL UNIT
2A/10  DZT   M E  V   TIMESTAMP CHANGED
3B/1C    T            TOO MANY LOGICAL OBJECTS ON PARTITION TO SUPPORT OPERATION
26/08  DZTPRO    K    TOO MANY SEGMENT DESCRIPTORS
26/06  DZTPRO    K    TOO MANY TARGET DESCRIPTORS
2C/01                 TOO MANY WINDOWS SPECIFIED
4B/02  DZTPROMAEBK    TOO MUCH WRITE DATA
09/00  DZT RO   B     TRACK FOLLOWING ERROR
09/01      RO    K    TRACKING SERVO FAILURE
29/06  DZTPROMAEBKVF  TRANSCEIVER MODE CHANGED TO LVD
29/05  DZTPROMAEBKVF  TRANSCEIVER MODE CHANGED TO SINGLE-ENDED
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
61/01                 UNABLE TO ACQUIRE VIDEO
74/01    T            UNABLE TO DECRYPT DATA
74/0C  DZT R MAEBKV   UNABLE TO DECRYPT PARAMETER LIST
57/00      R          UNABLE TO RECOVER TABLE-OF-CONTENTS
21/04  DZ             UNALIGNED WRITE COMMAND
74/02    T            UNENCRYPTED DATA ENCOUNTERED WHILE DECRYPTING
26/0A  DZTPRO    K    UNEXPECTED INEXACT SEGMENT
74/06    T            UNKNOWN SIGNATURE VERIFICATION KEY
53/01    T            UNLOAD TAPE FAILURE
08/04  DZTPRO    K    UNREACHABLE COPY TARGET
11/00  DZT RO   BK    UNRECOVERED READ ERROR
11/04  DZ   O   BK    UNRECOVERED READ ERROR - AUTO REALLOCATE FAILED
11/0B  DZ   O   BK    UNRECOVERED READ ERROR - RECOMMEND REASSIGNMENT
11/0C  DZ   O   BK    UNRECOVERED READ ERROR - RECOMMEND REWRITE THE DATA
46/00  DZTPROM  BK    UNSUCCESSFUL SOFT RESET
35/01  DZTPROMAEBKVF  UNSUPPORTED ENCLOSURE FUNCTION
26/09  DZTPRO    K    UNSUPPORTED SEGMENT DESCRIPTOR TYPE CODE
26/07  DZTPRO    K    UNSUPPORTED TARGET DESCRIPTOR TYPE CODE
2C/10  DZ             UNWRITTEN DATA IN ZONE
59/00       O         UPDATED BLOCK READ
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
26/12    T            VENDOR SPECIFIC KEY REFERENCE NOT FOUND
00/1C    T            VERIFY OPERATION IN PROGRESS
09/05  DZT RO   B     VIBRATION INDUCED TRACKING ERROR
61/00                 VIDEO ACQUISITION ERROR
65/00  DZTPROMAEBKVF  VOLTAGE FAULT
53/05        M        VOLUME IDENTIFIER INVALID
53/06        M        VOLUME IDENTIFIER MISSING
3F/0A  DZT ROMAEBK    VOLUME SET CREATED OR MODIFIED
3F/0C  DZT ROMAEBK    VOLUME SET DEASSIGNED
3F/0B  DZT ROMAEBK    VOLUME SET DELETED
3F/0D  DZT ROMAEBK    VOLUME SET REASSIGNED
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
0B/00  DZTPROMAEBKVF  WARNING
0B/05  DZTPRO AEBKVF  WARNING - BACKGROUND MEDIUM SCAN DETECTED MEDIUM ERROR
0B/04  DZTPRO AEBKVF  WARNING - BACKGROUND PRE-SCAN DETECTED MEDIUM ERROR
0B/03  DZTPROMAEBKVF  WARNING - BACKGROUND SELF-TEST FAILED
0B/07  DZTPROMAEBKVF  WARNING - DEGRADED POWER TO NON-VOLATILE CACHE
0B/09  DZ             WARNING - DEVICE STATISTICS NOTIFICATION ACTIVE
0B/02  DZTPROMAEBKVF  WARNING - ENCLOSURE DEGRADED
0B/0E  DZTPROMAEBKV   WARNING - HIGH CRITICAL HUMIDITY LIMIT EXCEEDED
0B/0A  DZTPROMAEBKV   WARNING - HIGH CRITICAL TEMPERATURE LIMIT EXCEEDED
0B/10  DZTPROMAEBKV   WARNING - HIGH OPERATING HUMIDITY LIMIT EXCEEDED
0B/0C  DZTPROMAEBKV   WARNING - HIGH OPERATING TEMPERATURE LIMIT EXCEEDED
0B/0F  DZTPROMAEBKV   WARNING - LOW CRITICAL HUMIDITY LIMIT EXCEEDED
0B/0B  DZTPROMAEBKV   WARNING - LOW CRITICAL TEMPERATURE LIMIT EXCEEDED
0B/11  DZTPROMAEBKV   WARNING - LOW OPERATING HUMIDITY LIMIT EXCEEDED
0B/0D  DZTPROMAEBKV   WARNING - LOW OPERATING TEMPERATURE LIMIT EXCEEDED
0B/13  DZTPROMAEBKVF  WARNING - MICROCODE DIGITAL SIGNATURE VALIDATION FAILURE
0B/12  DZTPROMAEBKVF  WARNING - MICROCODE SECURITY AT RISK
0B/06  DZTPROMAEBKVF  WARNING - NON-VOLATILE CACHE NOW VOLATILE
0B/08  DZTPROMAEBKVF  WARNING - POWER LOSS EXPECTED
0B/01  DZTPROMAEBKVF  WARNING - SPECIFIED TEMPERATURE EXCEEDED
30/0D    T            WORM MEDIUM - INTEGRITY CHECK
30/0C    T            WORM MEDIUM - OVERWRITE ATTEMPTED
11/15  DZ             WRITE AFTER SANITIZE REQUIRED
50/00    T            WRITE APPEND ERROR
50/01    T            WRITE APPEND POSITION ERROR
21/05  DZ             WRITE BOUNDARY VIOLATION
0C/00  DZT R          WRITE ERROR
0C/02  DZ   O   BK    WRITE ERROR - AUTO REALLOCATION FAILED
0C/12  DZ             WRITE ERROR - INSUFFICIENT ZONE RESOURCES
0C/09      R          WRITE ERROR - LOSS OF STREAMING
0C/0D  DZTPRO AEBKVF  WRITE ERROR - NOT ENOUGH UNSOLICITED DATA
0C/0A      R          WRITE ERROR - PADDING BLOCKS ADDED
0C/03  DZ   O   BK    WRITE ERROR - RECOMMEND REASSIGNMENT
0C/01  DZ        K    WRITE ERROR - RECOVERED WITH AUTO REALLOCATION
0C/08      R          WRITE ERROR - RECOVERY FAILED
0C/07  DZ  R          WRITE ERROR - RECOVERY NEEDED
0C/11  DZ             WRITE ERROR - RECOVERY SCAN NEEDED
0C/0C  DZTPRO AEBKVF  WRITE ERROR - UNEXPECTED UNSOLICITED DATA
27/00  DZT RO   BK    WRITE PROTECTED
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
2C/0E  DZ             ZONE IS OFFLINE
27/08  DZ             ZONE IS READ ONLY
2A/16  DZ             ZONE RESET WRITE POINTER RECOMMENDED
3F/17  DZ             ZONE TRANSITION TO FULL
31/02      R          ZONED FORMATTING FAILED DUE TO SPARE LINKING
top - bottom
       D - Direct Access Block Device (SBC-4)         Device Column key
       .Z - Host Managed Zoned Block Device (ZBC)     ---------------------
       . T - Sequential Access Device (SSC-5)         blank = code not used
       .  P - Processor Device (SPC-2)                not blank = code used
       .  .R - C/DVD Device (MMC-6)
       .  . O - Optical Memory Block Device (SBC)
       .  .  M - Media Changer Device (SMC-3)
       .  .  .A - Storage Array Device (SCC-2)
       .  .  . E - SCSI Enclosure Services device (SES-3)
       .  .  .  B - Simplified Direct-Access (Reduced Block) device (RBC)
       .  .  .  .K - Optical Card Reader/Writer device (OCRW)
       .  .  .  . V - Automation/Device Interface device (ADC-4)
       .  .  .  .  F - Object-based Storage Device (OSD-2)
ASC/   .  .  .  .  .
ASCQ   DZTPROMAEBKVF  Description
3F/12  DZTPR MAEBK F  iSCSI IP ADDRESS ADDED
3F/14  DZTPR MAEBK F  iSCSI IP ADDRESS CHANGED
3F/13  DZTPR MAEBK F  iSCSI IP ADDRESS REMOVED
top - bottom

Return to the SCSI Common Codes & Values page
Return to the T10 Home Page