1)
Under the Data Encryption Algorithm
descriptor:
Table XXX specifies the values for the
Decryption KAD Capabilities (DKAD_C) field. The DKAD_C field only indicates
the decryption capabilities associated with DECRYPTION MODE field values
of DECRYPT and MIXED of the Security Protocol Out command in the Set Data
Encryption page (see Table 146).
I suggest this rewording to put it into
"standardeze".
Table XXX specifies the values for the
Decryption KAD Capabilities (DKAD_C) field. The DKAD_C field indicates
the decryption capabilities when theDECRYPTION MODE field of the Set Data
Encryption page (see Table 146) is set to DECRYPT or MIXED.
2)
Under the Data Encryption Algorithm
descriptor TABLE XXX DKAD_C field values please reword your CHECK CONDITION
texts to match this example I took from SPC-4 (I think you are just missing
the word "status").
shall terminate the command with CHECK
CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional
sense code set to INVALID FIELD IN PARAMETER LIST.
3)
Again in TABLE XXX DKAD_C field values,
I would prefer a change in Name from:
required -> KAD Required
not required -> KAD Not Allowed
optional -> KAD Optional
4)
Under the Data Encryption Status page
your new text reads:
The available supplemental decryption
key count (ASDK_COUNT) field contains the current number of available supplemental
decryption keys that the application client may utilize. If the device
server is not capable of supporting supplemental decryption keys then the
ASDK_COUNT field shall contain a zero value.
It is not clear to me if this is the
number of additional keys that may be loaded or if this is the number of
keys already loaded. Please clarify if this is the count of keys
already loaded or if this is the number of additional keys that may be
loaded. Also, please state the relationship between this number and
the MSDK_COUNTfield of the Data Encryption Algorithm descriptor.
Thanks,
Kevin D. Butt
SCSI & Fibre Channel Architect, Tape Firmware
MS 6TYA, 9000 S. Rita Rd., Tucson, AZ 85744
Tel: 520-799-2869 / 520-799-5280
Fax: 520-799-2723 (T/L:321)
Email address: kdbutt@us.ibm.com http://www-03.ibm.com/servers/storage/
From:
Dale LaFollette <Dale.Lafollette@Sun.COM>
To:
t10@t10.org
Date:
12/17/2008 11:08 AM
Subject:
SSC-3: Resolution to LB Comment EMC-001
(Multiple SDK support)
* From the T10 Reflector (t10@t10.org), posted by:
* Dale LaFollette <Dale.Lafollette@Sun.COM>
*
I have uploaded T10/08-410r1 that includes the changes requested
at the
Nov. SSC-3 working group.
Regards,
Dale LaFollette
Principal Engineer, SW, Systems Group
Sun Microsystems, Inc.
500 Eldorado Blvd., Bldg. 5 MS UBRM05-383
Broomfield, CO 80021 United States
Tel: 800-555-9786 ext 77151 / 303-272-7151
Fax: 303-272-6555
Email address: Dale.LaFollette@Sun.com
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo@t10.org