From: "Penokie, George" <George.Penokie@lsi.com>
To: "Alvin.Cox@seagate.com" <Alvin.Cox@seagate.com>,
        "t10@t10.org"
	<t10@t10.org>
Date: Wed, 23 Jul 2008 10:44:58 -0600
Subject: RE: Proposal to replace the reference to 07-193 in SAS-2 with an
 annex
X-Message-Number: 8973
Formatted message: HTML-formatted message

Alvin,
I'm not sure which figure your comment 1 is referring to, but 'Figure 1 -
Reference transmitter test load physical characterization' in the proposal is
the same figure that is already in the 'Reference transmitter test load'
section. I an not proposing it be moved nor am I proposing any change to it
(except fixing some undefined words).
Figure A.1 in the proposal is new and a more specific version of 'Figure 1 -
Reference transmitter test load physical characterization' showing more
details of the specific setup. Figure A.2 essentially replaces the picture
with a more useful drawing that actually show more closely how the setup is
connected.
I have no problem doing one of two things:
- making this annex nominative; or
- moving the words on the zip files back into the main text. Assuming we can
come up with some meaningful words in the process.
Bye for now,
George Penokie
LSI Corporation
3033 41st St. NW
Suite 100
Rochester, MN 55901
507-328-9017
george.penokie@lsi.com
________________________________
From: owner-t10@t10.org [mailto:owner-t10@t10.org] On Behalf Of
Alvin.Cox@seagate.com
Sent: Wednesday, July 23, 2008 10:17 AM
To: t10@t10.org
Subject: Re: Proposal to replace the reference to 07-193 in SAS-2 with an
annex
I have a couple of isues with this.
1. The figure is a general figure for TxRx connections rather than specific
to the test load. It should probably be in the TxRx section of chapter 5.
2. Although the pdf file describing how the 10-meter cable was measured is
informative, the s-parameter zip file is normative and required for
simulations used to test the transmitter and receiver.
It will be on the agenda for discussion.
Alvin Cox
Seagate Technology, LLC
Office 405-381-8067
Cell 405-206-4809
E-Mail	alvin.cox@seagate.com
"Penokie, George" <George.Penokie@lsi.com>
No Phone Info Available
07/23/2008 08:53 AM
To
"T10 Reflector (t10@t10.org)" <t10@t10.org>
cc
"Fromm, Galen" <Galen.Fromm@molex.com>, "Alvin.Cox@seagate.com"
<Alvin.Cox@seagate.com>
Subject
Proposal to replace the reference to 07-193 in SAS-2 with an annex
This is a re-creation of 07-193r1 putting it into a form that can be placed
into the SAS-2 standard as an informative annex. If you have any comments let
me know. I suspect it will be high on the agenda for the next SAS-2 phy call.
Your PDF file will be posted at:
   http://www.t10.org/ftp/t10/document.08/08-312r0.pdf
Bye for now,
George Penokie
LSI Corporation
3033 41st St. NW
Suite 100
Rochester, MN 55901
507-328-9017
george.penokie@lsi.com