From: Bill.Martin@emulex.com
Subject: Another SAS-2 comment
Date: Fri, 6 Jun 2008 11:35:19 -0700
To: <Elliott@hp.com>, <t10@t10.org>
Cc: <Tara.Chand@emulex.com>, <mj@daisycutter.rv.emulex.com>,
        <Murthy.Kompella@emulex.com>
X-Message-Number: 8844
Formatted message: HTML-formatted message

Rob:
One more SAS-2 comment:
8.2.2.3.8 specifies a transition from PL_OC2 to PL_OC1 after a Phy
Disabled confirmation is received from all of the link layers in the
port; however, this event should cause a Transmission Status (No Phys In
Port) to be sent to the port layer if there are any pending Transmit
Frame requests, and this transition should be done after this
Transmission Status is sent to the port layer.	This may b e as simple
as adding a paragraph in 8.2.2.2.1.
Thanks,
Bill Martin
Emulex
Office of Technology
Industry Standards
916 772-3658
916 765-6875 (Cell)
bill.martin@emulex.com