To: "Ballard, Curtis C (StorageWorks)" <curtis.ballard@hp.com> Cc: t10@t10.org Subject: Re: Error codes in 07-372r1 that are used by HP From: Kevin D Butt <kdbutt@us.ibm.com> Date: Wed, 23 Apr 2008 15:56:37 -0700 X-Message-Number: 8736 Formatted message: HTML-formatted message Thanks Curtis. For the conference call I decided to only mark the action items that were closed and assume everything else was a carry-over. I should probably put a note to that effect. Then the closed items will jump out. Thanks, Kevin D. Butt SCSI & Fibre Channel Architect, Tape Firmware MS 6TYA, 9000 S. Rita Rd., Tucson, AZ 85744 Tel: 520-799-2869 / 520-799-5280 Fax: 520-799-2723 (T/L:321) Email address: kdbutt@us.ibm.com http://www-03.ibm.com/servers/storage/ "Ballard, Curtis C (StorageWorks)" <curtis.ballard@hp.com> 04/23/2008 02:17 PM To Kevin D Butt/Tucson/IBM@IBMUS cc "Ballard, Curtis C (StorageWorks)" <curtis.ballard@hp.com> Subject Error codes in 07-372r1 that are used by HP Kevin, I had an action item to get feedback from HP to you for the error codes in 07-372. Sorry it's so late but here it is. One interesting note, I didn't see that action item in the con call notes as closed or carry-over but I did see it in the March 10th minutes so I think the action items may not have gotten carried into the con-call minutes completely. Curtis ------------------------------------ MEDIUM MAGAZINE REMOVED HP has products that report this as a Not Ready CC to any command that causes motion (INITIALIZE, SEEK, MOVE, EXCHANGE) in a library that is unable to function when the magazine that contains one of the elements is removed so we would like to see this allowed as a CC to motion commands. HP has products that will report this as an illegal command CC to any move command (MOVE, EXCHANGE) if the magazine containing the destination element is missing. HP has products that report this value in the sense data for a READ ELEMENT STATUS when an element is not accessible because the magazine that it is in is removed. MEDIUM MAGAZINE INSERTED HP has products that return this as a UA when a load port door is closed (Mailslot) MEDIUM MAGAZINE LOCKED Not used MEDIUM MAGAZINE UNLOCKED Not used MEDIUM MAGAZINE NOT ACCESSIBLE HP has products that will report this as an illegal command CC to any move command (MOVE, EXCHANGE) if the destination element is in a magazine is in a position where the picker can not access it.