Howdy Bob,
I disagree with stating the obvious. The
row is misleading and again provides no value.
FCP already states: An accept
response code indicating other than REQUEST EXECUTED (see 6.3.5 and FC-LS)
shall be provided if the PRLI ELS FCP Service Parameter page is incorrect or if
a requested image pair is not established.
…Dave
From:
Bob.Nixon@Emulex.Com [mailto:Bob.Nixon@Emulex.Com]
Sent: Wednesday, April 09, 2008
5:11 PM
To:
Subject: RE: [T11.3] FC-DA-2:
table 35 - ACC Response code = "Command executed"
Hi, Dave, I think what that row is trying
to say is that a Target has to be able to give that response (if it couldn't, it
could not be a Target). Other responses are not sepcifically prohibited by that
line, although it could be read that way. I would suggest adding another row:
ACC Response code != “Command
executed”: -
A P -
- bob
From: t11_3-bounces@listserve.com
[mailto:t11_3-bounces@listserve.com] On
Behalf Of
Sent: Wednesday, April 09, 2008
11:49 AM
To: t11_3@t11.org; t10@t10.org
Subject: [T11.3] FC-DA-2: table 35
- ACC Response code = "Command executed"
FC-DA-2 table 35 has a row specifying an ACC Response code =
“Command executed” is a Required PRLI response from an FCP target.
Other responses are certainly possible (see FCP-4) thus I
believe this is wrong (and actually mislabeled) and provides no real value
either.
I propose that the row be removed.
Comments?
...Dave