Subject: RE: [T11.3] FC-DA-2: table 35 - ACC Response code = "Command executed"
Date: Thu, 10 Apr 2008 09:32:18 -0600
From: "David Peterson" <dpeterso@brocade.com>
To: <Bob.Nixon@emulex.com>, <t11_3@t11.org>, <t10@t10.org>
X-Message-Number: 8707
Formatted message: HTML-formatted message

Howdy Bob,
I disagree with stating the obvious. The row is misleading and again
provides no value.
FCP already states: An accept response code indicating other than
REQUEST EXECUTED (see 6.3.5 and FC-LS) shall be provided if the PRLI ELS
FCP Service Parameter page is incorrect or if a requested image pair is
not established. 
...Dave
________________________________
From: Bob.Nixon@Emulex.Com [mailto:Bob.Nixon@Emulex.Com] 
Sent: Wednesday, April 09, 2008 5:11 PM
To: David Peterson; t11_3@t11.org; t10@t10.org
Subject: RE: [T11.3] FC-DA-2: table 35 - ACC Response code = "Command
executed"
Hi, Dave, I think what that row is trying to say is that a Target has to
be able to give that response (if it couldn't, it could not be a
Target). Other responses are not sepcifically prohibited by that line,
although it could be read that way. I would suggest adding another row:
ACC Response code != "Command executed":   -	 A     P    -
   - bob
________________________________
From: t11_3-bounces@listserve.com [mailto:t11_3-bounces@listserve.com]
On Behalf Of David Peterson
Sent: Wednesday, April 09, 2008 11:49 AM
To: t11_3@t11.org; t10@t10.org
Subject: [T11.3] FC-DA-2: table 35 - ACC Response code = "Command
executed"
FC-DA-2 table 35 has a row specifying an ACC Response code = "Command
executed" is a Required PRLI response from an FCP target.
Other responses are certainly possible (see FCP-4) thus I believe this
is wrong (and actually mislabeled) and provides no real value either.
I propose that the row be removed.
Comments?
...Dave