To: t10@t10.org
Subject: RE: IKEv2-SCSI Timeout Values inconsistency in SPC-4
From: Kevin D Butt <kdbutt@us.ibm.com>
Date: Tue, 25 Mar 2008 13:40:13 -0700
X-Message-Number: 8645
Formatted message: HTML-formatted message

Another error.
Table 387 page 451 has an error.  It shows:
23h (i.e., Identification ? Device Server)
But should be 24h since 23h is the Identification - Application Client
Thanks,
Kevin D. Butt
SCSI & Fibre Channel Architect, Tape Firmware
MS 6TYA, 9000 S. Rita Rd., Tucson, AZ 85744
Tel: 520-799-2869 / 520-799-5280
Fax: 520-799-2723 (T/L:321)
Email address: kdbutt@us.ibm.com
http://www-03.ibm.com/servers/storage/ 
"Paul Suhler" <Paul.Suhler@Quantum.Com> 
03/24/2008 02:48 PM
To
Kevin D Butt/Tucson/IBM@IBMUS, <t10@t10.org>
cc
Subject
RE: IKEv2-SCSI Timeout Values inconsistency in SPC-4
Moreover, Table 385 on page 447 shows a value of 83h for IKEv2-SCSI 
Timeout Values, while Table 387 shows the value as 84h.
Thanks,
Paul
___________________________________
Paul A. Suhler | Firmware Engineer | Quantum Corporation | Office: 
949.856.1450 | paul.suhler@quantum.com
___________________________________
Disregard the Quantum Corporation confidentiality notice below.  The 
information contained in this transmission is not confidential. Permission 
is hereby explicitly granted to disclose, copy, and further distribute to 
any individual(s) or organization(s), without restriction.
From: owner-t10@t10.org [mailto:owner-t10@t10.org] On Behalf Of Kevin D 
Butt
Sent: Monday, March 24, 2008 12:02 PM
To: t10@t10.org
Subject: IKEv2-SCSI Timeout Values inconsistency in SPC-4
In SPC-4r14 
There seems to be an inconsistency between 5.13.4.8.3 and Table 387 o page 
450. 
Table 387 has two rows indicating timeout values that are not talked about 
in 5.13.4.8.3. 
first row under "SECURITY PROTOCOL IN command with SECURITY PROTOCOL 
SPECIFIC field set to 0102h (i.e., Key Exchange step) Authentication step 
not skipped" 
and first row under "SECURITY PROTOCOL IN command with SECURITY PROTOCOL 
SPECIFIC field set to 0102h (i.e., Key Exchange step) Authentication step 
skipped" have 
"84h (i.e., IKEv2-SCSI Timeout Values)" 
Since text takes precedence over tables it appears that these timeout 
values are not returned.  However, this does appear to be inconsistent 
with each other. 
Thanks, 
Kevin D. Butt
SCSI & Fibre Channel Architect, Tape Firmware
MS 6TYA, 9000 S. Rita Rd., Tucson, AZ 85744
Tel: 520-799-2869 / 520-799-5280
Fax: 520-799-2723 (T/L:321)
Email address: kdbutt@us.ibm.com
http://www-03.ibm.com/servers/storage/ 
The information contained in this transmission may be confidential. Any 
disclosure, copying, or further distribution of confidential information 
is not permitted unless such privilege is explicitly granted in writing by 
Quantum Corporation. Furthermore, Quantum Corporation is not responsible 
for the proper and complete transmission of the substance of this 
communication or for any delay in its receipt.