To: t10@t10.org Subject: SMC-3 Action Item Reminder From: Kevin D Butt <kdbutt@us.ibm.com> Date: Thu, 3 Jan 2008 17:48:18 -0700 X-Message-Number: 8381 Formatted message: HTML-formatted message All SMC-3 Action Item holders. Here is a reminder of action items generated during the November SMC-3 Working Group. 06-020 [Robert Payne] Define a philosophy for Write Exclusive Persistent Reservations in SMC. 06-044 [Roger Cummings] Solicit additional vendor-specific sense codes from library vendors per June discussion item 4.4. 06-063 [Noud Snelder] Investigate use of LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED error code. 07-003 [Curtis Ballard] Create a proposal to define the usage of the ?Cleaning Requested? and ?Cleaning Failure? error codes. 07-006 [Rod Wideman] Define a new ASC/ASCQ for ?Logical Unit Not Ready ? Robotics Disabled?. 07-017 [Group] Make sure the all the functionality of Read Element Status is covered by the Report Element Information command (06-272) and the Report Volume Information command and examine if an informative annex to map the RES command onto these is appropriate. [Reminder to do as final step] 07-027 [Rod Wideman] Revise and post SMC-3 New Additional Sense Codes Usage (07-018r0) as 07-018r1. 07-042 [Paul Entzel] Write a proposal for the commands which the cached ready state in ADC may be used. 07-058 [Kevin Butt] Revise SMC-3: Medium Magazine Error Codes (07-372r0) and post. 07-059 [Noud Snelder] Noud Snelder Revise SMC-3 Additional sense code for incompatible destination element (07-222r1) and post. 05Nov07-01 [Kevin Butt]: Determine what actions set TapeAlert flag 19h (illegal operation) and when the flag is cleared. Also what actions does it generate? 05Nov07-02 [Curtis Ballard]: Determine what actions set TapeAlert flag 19h (illegal operation) and when the flag is cleared. Also what actions does it generate? 05Nov07-03 [Erich Oetting]: Determine what actions set TapeAlert flag 19h (illegal operation) and when the flag is cleared. Also what actions does it generate? 05Nov07-04 [Rod Wideman]: Determine what actions set TapeAlert flag 19h (illegal operation) and when the flag is cleared. Also what actions does it generate? 05Nov07-05 [Halvard Eriksen]: Determine what actions set TapeAlert flag 19h (illegal operation) and when the flag is cleared. Also what actions does it generate? 05Nov07-06 [Noud Snelder]: Determine what actions set TapeAlert flag 19h (illegal operation) and when the flag is cleared. Also what actions does it generate? 05Nov07-07 [Nould Snelder] to incorporate SMC-3 Additional sense code for incompatible destination element (07-222r1) as revised. 05Nov07-08 [Group] review SMC-3 for changing SPC-3 references to SPC-4. 05Nov07-09 [Noud Snelder] to revise and post SMC-3, READ ATTRIBUTE and WRITE ATTRIBUTE command clarification (07-244r2). 05Nov07-10 [Noud Snelder] to incorporate SMC-3, READ ATTRIBUTE and WRITE ATTRIBUTE command clarification (07-244r2) as revised into SMC-3. Kevin D. Butt SCSI & Fibre Channel Architect, Tape Firmware MS 6TYA, 9000 S. Rita Rd., Tucson, AZ 85744 Tel: 520-799-2869 / 520-799-5280 Fax: 520-799-2723 (T/L:321) Email address: kdbutt@us.ibm.com http://www-03.ibm.com/servers/storage/