To: t10@t10.org Subject: SAS PHY WG minutes posted and list of required items for completion. From: Alvin.Cox@seagate.com Date: Wed, 19 Sep 2007 17:29:48 -0500 X-Message-Number: 8099 Formatted message: HTML-formatted message The SAS PHY working group minutes are posted at: http://www.t10.org/ftp/t10/document.07/07-418r0.pdf Next conference call: 9/27/07 Toll Free Dial in Number: (877)810-9442 International Access/Caller Paid Dial In Number: (636)651-3190 PARTICIPANT CODE: 3243413 Webex information: https://seagate.webex.com/seagate Topic: SAS-2 PHY WG Date: Thursday Time: 10:00 am, Central Daylight Time (GMT -05:00, Chicago) Meeting number: 826 515 680 Meeting password: 6gbpsSAS Goal is for completion of the PHY spec for letter ballot of SAS 2 following the November plenary. There will be no face-to-face due to only 6 weeks between plenary meetings. Specific areas identified for needing completion: Transmitter common mode measurements to validate the currently proposed chart. [Anyone with silicon to test] Description of SSC profile allowed discontinuities. [Hernandez] Zero length test load proposal. [Olawsky} Should be reviewed by all to determine if ready for inclusion. Should the cable specification be done by common mode requirements or fall under channel simulation? [All] Define the delivered signal characteristics for physical receiver testing. Include 0.1UI sinusoidal jitter to do the equivalent of receiver tolerance testing. [Bari, Jenkins, Newman, Witt] Refine/provide status on simulation technology. [Jenkins, Newman] Proposal for JTF calibration of JMD’s [Cox] Anyone that can help in these specific areas is invited and encouraged to participate. Also please review 07-339 and provide any input to Alvin Cox or the T10 reflector. Alvin Cox Seagate Technology, LLC Office 405-381-8067 Cell 405-206-4809 E-Mail alvin.cox@seagate.com