To: t10@t10.org
Subject: SMC-3: Outstanding Action Items [Reminder]
From: Kevin D Butt <kdbutt@us.ibm.com>
Date: Fri, 24 Aug 2007 10:52:48 -0700
X-Message-Number: 8006
Formatted message: HTML-formatted message

- REMINDER -
The following is a list of outstanding Action Items from the July Minutes 
of the SMC WG for which I have seen no document posted.
06-020 [Robert Payne] Define a philosophy for Write Exclusive Persistent 
Reservations in SMC.
06-044 [Roger Cummings] Solicit additional vendor-specific sense codes 
from library vendors per June discussion item 4.4.
06-063 [Noud Snelder] Investigate use of LOGICAL UNIT NOT READY, 
INITIALIZING COMMAND REQUIRED error code.
07-003 [Curtis Ballard] Create a proposal to define the usage of the 
?Cleaning Requested? and ?Cleaning Failure? error codes.
07-004 [Kevin Butt] Create a proposal for the ?Medium Magazine? error 
codes.
07-006 [Rod Wideman] Define a new ASC/ASCQ for ?Logical Unit Not Ready ? 
Robotics Disabled?.
07-017 [Group] Make sure the all the functionality of Read Element Status 
is covered by the Report Element Information command (06-272) and the 
Report Volume Information command and examine if an informative annex to 
map the RES command onto these is appropriate. [Reminder to do as final 
step]
07-027 [Rod Wideman] Revise and post SMC-3 New Additional Sense Codes 
Usage (07- 018r0) as 07-018r1.
07-041 [Noud Snelder] Incorporate SMC-3: Diagnostics Data log page 
(06-395r5) into SMC-3
07-042 [Paul Entzel] Write a proposal for the commands which the cached 
ready state in ADC may be used.
07-044 [Noud Snelder] Incorporate SMC-3, POSITION TO ELEMENT command 
clarification (07-199r1) into SMC-3.
07-046 [Noud Snelder] Revise SMC-3, READ ATTRIBUTE and WRITE ATTRIBUTE 
command clarification (07-244r0) and post as 07-244r1
07-047 [Curtis Ballard] Revise SMC-3, Report Element Information 
(06-272r5) and post as 06-272r6
Thanks,
Kevin D. Butt
SCSI & Fibre Channel Architect, Tape Firmware
MS 6TYA, 9000 S. Rita Rd., Tucson, AZ 85744
Tel: 520-799-2869 / 520-799-5280
Fax: 520-799-2723 (T/L:321)
Email address: kdbutt@us.ibm.com
http://www-03.ibm.com/servers/storage/