For those in the Phy group interested in TWDP code.

Here’s a link to the original matlab source.

http://standards.ieee.org/downloads/802/802.3aq-2006/

Kevin

---

From: owner-t10@t10.org [mailto:owner-t10@t10.org] On Behalf Of Alvin.Cox@seagate.com
Sent: Wednesday, August 08, 2007 12:40 PM
To: t10@t10.org
Subject: Updated PHY specification and tomorrow's conference call

I have completed the transmitter device section except for some reference numbers to the receiver section. Changes also include putting the OOB transmitted requirements into a single section rather than in the transmitter tables. I will probably take a similar approach with the received OOB signal. I will start work updating the receiver device section, but wanted to go ahead and post this much to help in the review process.

  http://www.t10.org/ftp/t10/document.07/07-339r1.pdf

Please note that the 6Gbps eye opening tbd has an editor's note in the note referenced by the item. We determined that the eye opening would be hbased on the reference transmitter output voltage of 1000 mV pk-pk, but I am not sure how to handle this in the transmitter device specification table.

Please review for tomorrow's call.

I have not posted the agenda for the 8/9 call yet pending information regarding StatEye version 5. Any agenda item suggestions are welcome. Just let me know.

Alvin Cox
Seagate Technology, LLC
Office 405-381-8067
Cell 405-206-4809
E-Mail  alvin.cox@seagate.com