SMC-3 Attendee's, Here is the list of Action Items from the May 2007 SMC-3 Minutes

06-002        [Michael Banther] Reporting of virtual libraries / partitioning to host.

06-020        [Robert Payne] Define a philosophy for Write Exclusive Persistent Reservations in SMC.

06-044        [Roger Cummings] Solicit additional vendor-specific sense codes from library vendors per June discussion item 4.4.

06-063        [Halvard Eriksen] Investigate use of LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED error code.

07-003        [HP] Create a proposal to define the usage of the “Cleaning Requested” and “Cleaning Failure” error codes.

07-004        [Kevin Butt] Create a proposal for the “Medium Magazine” error codes.

07-006        [Rod Wideman] Define a new ASC/ASCQ for “Logical Unit Not Ready – Robotics Disabled”.

07-012  [Michael Banther] Create and post 06-420r1 (r0 revised as per discussion at the Feb­ruary 21, 2007 conference call).

07-016        [Kevin Marks] Revise and post SMC-3: Diagnostics Data log page, 06-395r4 (06-395r3 as revised).

07-017        [Group] Make sure the all the functionality of Read Element Status is covered by the Report Element Information command (06-272) and the Report Volume Infor­mation command and examine if an informative annex to map the RES command onto these is appropriate. [Reminder to do as final step]

07-027        [Rod Wideman] Revise and post SMC-3 New Additional Sense Codes Usage (07-018r0) as 07-018r1.

07-028        [Curtis Ballard] Revise and post SMC-3 Clarification of reporting drive prevented media removal (07-015r1)

07-029        [Noud Snelder] Revise and post SMC-3 Processed commands during not ready state (07-060r1)

07-030        [Roger Cummings] Revise and post SMC-3: Clarifying Addresses and Volumes (07-122r0)

07-031        [Noud Snelder] Incorporate SMC-3: Clarifying Addresses and Volumes (07-122r1) into SMC-3

07-032        [Noud Snelder] Revise and post SMC-3 Add PREVENT ALLOW MEDIA RE­MOVAL command (06-442r3)

07-033        [Noud Snelder] Incorporate SMC-3 Add PREVENT ALLOW MEDIA REMOVAL command (06-442r4) into SMC-3.

07-034        [Kevin Marks] Revise and post SMC-3: Diagnostics Data log page (06-395r4)

07-035        [Rod Wideman] Have Michael check the procedure for what to do regarding 99-148r7 which was approved in the May 2000 plenary but did not get put into SMC-2. Does it need to be incorporate it into SMC-3?


Kevin D. Butt
SCSI & Fibre Channel Architect, Tape Firmware
MS 6TYA, 9000 S. Rita Rd., Tucson, AZ 85744
Tel: 520-799-2869 / 520-799-5280
Fax: 520-799-2723 (T/L:321)
Email address: kdbutt@us.ibm.com
http://www-03.ibm.com/servers/storage/