The SPC-4 revision containing the changes approved in September has
been uploaded as SPC-4 r07:
http://www.t10.org/ftp/t10/drafts/spc4/spc4r07.pdf
For the more adventurous, there is SPC-4 r07a:
http://www.t10.org/ftp/t10/drafts/spc4/spc4r07.pdf
SPC-4 r07a has all the technical content found in r07, plus one
invisible and two slightly visible changes.
- The sources for SPC-4 r07a are in FrameMaker 7.2, not the
tried-and-true FrameMaker 6.0 which has been used for several years
worth of SPC-3 and SPC-4 revisions.
- All device-type vs code value tables (e.g, the ASC/ASCQ
lists) have been converted from a column-per-device-type format to a
tab-separated format. This change reduced the source file sizes
substantially, cut minutes off the time required to build the PDF, and
eliminate a bazillion error messages from the PDF Distiller. In
addition, the DTL... letters were squished together more than was
previously possible and the description column grew by a few tenths of
an inch which allowed for fewer line wraps. The total PDF size shrunk
by one page as a result.
- A handful of typos were fixed (e.g., the Description column
in the Diagnostic pages table was headed with 'Mode Page name').
Devotees of how SPC-4 looks will surely want to grab a copy of
r07a. The less finicky may prefer r07.
Enjoy,
.Ralph