To: Sandeep taneja <sandeep.taneja@nsysinc.com>
Cc: Monika <monika.Talwar@nsysinc.com>, owner-t10@t10.org, t10@t10.org
Subject: Re: connection info in target transport layer(ST_TFR)
From: George Penokie <gop@us.ibm.com>
Date: Tue, 3 Oct 2006 15:10:20 -0500
X-Message-Number: 7287
Formatted message: HTML-formatted message

Sandeep,
The source address that a frame is checked against is the SAS source 
address received in the open address frame. The current SAS-2 does not 
pass that information from the link layer to the port layer. I will 
request a change that will add a SAS source address argument to the 
connection opened confirmation.
The SAS source address is already passed between the port and transport 
layer as part of the frame received confirmation. As defined in section 
9.2.6.1 ST state machines overview.
Bye for now,
George Penokie
Dept 9A8 030-3 A410
E-Mail:    gop@us.ibm.com
Internal:  553-5208
External: 507-253-5208
Sandeep taneja <sandeep.taneja@nsysinc.com> 
Sent by: owner-t10@t10.org
10/03/2006 08:30 AM
To
t10@t10.org
cc
George Penokie/Rochester/IBM@IBMUS, Monika <monika.Talwar@nsysinc.com>
Subject
connection info in target transport layer(ST_TFR)
* From the T10 Reflector (t10@t10.org), posted by:
* Sandeep taneja <sandeep.taneja@nsysinc.com>
*
Hi all
Specs sas2r06 says that Transport layer may check the hashed source &
destination address in the recieved frame based on the "connection
information"
Taken from specs sas2r06 page:422
---------------------------------------------------------------
If the frame type is correct relative to the Frame Received
confirmation, then this state machine may check
that the hashed source SAS address matches the SAS address of the SAS
port that transmitted the frame
and that the hashed destination SAS address matches the SAS address of
the SAS port that received the
frame based on the "connection information."
-----------------------------------------------------------------
Ques:- How Target side checks the received address for the first
recieved frame(eg recieved Command frame Source & destination address).
if Connection info is maintained by the recieved Open address frame.
then how these are communicated to transport layer 
Please help...
Thanks & regards
Sandeep 
*
* For T10 Reflector information, send a message with
* 'info t10' (no quotes) in the message body to majordomo@t10.org