Date: Sat, 29 Jul 2006 00:00:06 +0200
From: Jan-Eric Duden <jdu@ashampoo.com>
To: Katsuki Hattori <khattori@nero.com>
CC: t10@t10.org
Subject: Re: MMC5r03a: Close Track Session Command - "Close Function" moved
 from Byte 2 to Byte 3
X-Message-Number: 7108
Formatted message: HTML-formatted message

Dear Mr Hattori,
Thank you for your answer.
I also checked some old revisions, too. There are all consistent except 
the last revision.
I hope nobody implements the description until its fixed ;).
MfG / Regards
Jan-Eric Duden
ashampoo Technology GmbH & Co. KG
http://tech.ashampoo.com
http://www.ashampoo.com
Katsuki Hattori wrote:
> * From the T10 Reflector (t10@t10.org), posted by:
> * "Katsuki Hattori" <khattori@nero.com>
> *
> Dear Mr.Duden,
>
> Probably, this is the editorial miss of MMC5r03a. 
>
> I checked "the latest Fuji document, the latest BDCommand document, and
MMC3/4 document." 
> This part of these documents was the same description as MMC5r03. 
>
> Hello Bill,
> Is this a simple miss? 
>
>
> Thanks and best regards,
> *********************************************************
> Katsuki Hattori
> Research & Standardization division
> Manager
>
> Nero K.K.
> Rover Center-kita 8F
> 1-2-2 Nakagawa-chuou, Tsuzuki-ku
> Yokohama, Kanagawa, 224-0003, Japan
> NERO - BECAUSE TECHNOLOGY COUNTS
> www.nero.com
> www.nerodigital.com
> *********************************************************
>
>
>
>   
>> -----Original Message-----
>> From: owner-t10@t10.org [mailto:owner-t10@t10.org] On Behalf 
>> Of Jan-Eric Duden
>> Sent: Friday, July 28, 2006 6:59 PM
>> To: t10@t10.org
>> Subject: MMC5r03a: Close Track Session Command - "Close 
>> Function" moved from Byte 2 to Byte 3
>>
>> * From the T10 Reflector (t10@t10.org), posted by:
>> * Jan-Eric Duden <jdu@ashampoo.com>
>> *
>> Hallo,
>>
>> I just checked out the MMC05r03a draft. The Close Track 
>> Session CDB changed from r03 to r03a.
>> In r03a the Close Function bits are now located in byte 3 
>> instead of byte 2.
>> Is this correct or a mistake?
>>
>> --
>> MfG / Regards
>> Jan-Eric Duden
>> ashampoo Technology GmbH & Co. KG
>> http://tech.ashampoo.com
>> http://www.ashampoo.com
>>
>> *
>> * For T10 Reflector information, send a message with
>> * 'info t10' (no quotes) in the message body to majordomo@t10.org
>>
>>     
>
> *
> * For T10 Reflector information, send a message with
> * 'info t10' (no quotes) in the message body to majordomo@t10.org
>