Subject: ADC-2 Editorial Change, T10/06-061r3
Date: Wed, 12 Jul 2006 10:36:11 -0700
From: "Paul Suhler" <Paul.Suhler@Quantum.com>
To: <t10@t10.org>
X-Message-Number: 7052
Formatted message: HTML-formatted message

ADI-2 Working Group members:
Paul Entzel pointed out an error in T10/06-061r3, which we approved on
Monday.
	6.1.2.4.1 DT device primary port status log parameter(s)
overview
	NOTE 8 When the VS bit is set to one, vendor-specific log
parameters may appear in a standard log page (e.g. the vendor-specific
parameters in the Error Counter log pages, see SPC-3) or in a
vendor-specific log page. If the device includes an ADT ADI port (see
ADT-2) the application client may be able to retrieve vendor-specific
log parameters using the vendor-specific protocol of ADT-2.
(In ADC-2 rev 5a, the section is now 6.1.2.2, Very high frequency data
log parameter.)
We conferred with Michael Banther, who proposed the VS bit.  We agreed
that the above change should be backed out as an editorial change when
Paul E. incorporates this proposal into ADC-2.
If anyone disagrees with handling this change as editorial, then let me
know and I'll bring in a proposal.
Thanks,
Paul Suhelr
Quantum