Subject: SAS wide init/targ command transfers
Date: Tue, 6 Jun 2006 17:57:48 +0800
From: "Mignon Fernandez" <Mignon.M.Fernandez@bitmicro.com>
To: <t10@t10.org>
X-Message-Number: 6927
Formatted message: HTML-formatted message

Hello,

Based on how I understand the spec (sas1r10), it is possible for a wide
Initiator and a wide Target to have simultaneous connections with each
other on different PHYs.

For this scenario (a wide initiator having multiple simultaneous
connections with a wide target), I could not find the info in the spec
the rules or the restrictions of command transfer/processing (e.g. if
only simple commands can be transmitted etc..). Can there be a case
where a wide initiator sends an ordered command on one phy and another
ordered command on another phy to the same wide Target?

Thanks in advance,
Mignon Fernandez
<please ignore disclaimer>
------------------------------------------------------------
CONFIDENTIALITY NOTICE

This email and any attached documents may be confidential
and property of BiTMICRO Networks, Inc. If you are not the

intended recipient, you may not disclose, copy, distribute,
or act in reliance on the information in this email.
Also note, this email and attached documents are scanned for

the presence of virus.	Changes made to this email after it

has been sent is not the responsibility of BiTMICRO Networks, Inc.